configs: Don't use SPI_FLASH_BAR as default

[oweals/u-boot.git] / include / configs / MPC8308RDB.h

diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index c079afe8a07cf4eb66b98ab3e023778b8cf25337..3827ea464b44edee6b56550667fddd6cb6e251dd 100644 (file)
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
  * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
  *
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,10 +15,7 @@
 #define CONFIG_MPC830x         1 /* MPC830x family */
 #define CONFIG_MPC8308         1 /* MPC8308 CPU specific */
 
-#define CONFIG_MISC_INIT_R
-
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_USE_PIO
 #endif
@@ -214,13 +210,10 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI           /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER                /* use the CFI driver */
 #define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
 
 #define CONFIG_SYS_FLASH_BASE          0xFE000000 /* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE          8 /* FLASH size is 8M */
-#define CONFIG_SYS_FLASH_PROTECTION    1 /* Use h/w Flash protection. */
 
 /* Window base at flash base */
 #define CONFIG_SYS_LBLAWBAR0_PRELIM    CONFIG_SYS_FLASH_BASE
@@ -297,7 +290,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -366,7 +358,6 @@
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET       /* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 #define CONFIG_SYS_TSEC2_OFFSET        0x25000
@@ -375,7 +366,6 @@
 /*
  * TSEC ethernet configuration
  */
-#define CONFIG_MII             1 /* MII PHY management */
 #define CONFIG_TSEC1_NAME      "eTSEC0"
 #define CONFIG_TSEC2_NAME      "eTSEC1"
 #define TSEC1_PHY_ADDR         2
@@ -405,20 +395,14 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
 
-#define CONFIG_CMDLINE_EDITING 1       /* add command line history */
-
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
 
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */