sh: Fix compile error sh7763rdp board

[oweals/u-boot.git] / include / configs / MPC8266ADS.h

diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index d6dd73bfd0d8b1bce9d3b000e67771f0b191adef..3659002d5e8b82cef898487929c83cb424050ed1 100644 (file)
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -83,8 +83,7 @@
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  */
 #undef CONFIG_ETHER_ON_SCC             /* define if ether on SCC   */
 #define CONFIG_ETHER_ON_FCC            /* define if ether on FCC   */
@@ -141,44 +140,32 @@
  */
 #define SPD_EEPROM_ADDRESS     0x50
 
-
 #define CONFIG_8260_CLKIN      66000000        /* in Hz */
 #define CONFIG_BAUDRATE                115200
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_all.h>
-
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_BMP
-#undef CONFIG_CMD_BSP
-#undef CONFIG_CMD_DATE
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_DISPLAY
-#undef CONFIG_CMD_DOC
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_EXT2
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_KGDB
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_REISER
-#undef CONFIG_CMD_SCSI
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_SNTP
-#undef CONFIG_CMD_VFD
-#undef CONFIG_CMD_UNIVERSE
-#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_XIMG
+#include <config_cmd_default.h>
+
+/* Commands we want, that are not part of default set */
+#define CONFIG_CMD_ASKENV      /* ask for env variable         */
+#define CONFIG_CMD_CACHE       /* icache, dcache               */
+#define CONFIG_CMD_DHCP                /* DHCP Support                 */
+#define CONFIG_CMD_DIAG                /* Diagnostics                  */
+#define CONFIG_CMD_IMMAP       /* IMMR dump support            */
+#define CONFIG_CMD_IRQ         /* irqinfo                      */
+#define CONFIG_CMD_MII         /* MII support                  */
+#define CONFIG_CMD_PCI         /* pciinfo                      */
+#define CONFIG_CMD_PING                /* ping support                 */
+#define CONFIG_CMD_PORTIO      /* Port I/O                     */
+#define CONFIG_CMD_REGINFO     /* Register dump                */
+#define CONFIG_CMD_SAVES       /* save S record dump           */
+#define CONFIG_CMD_SDRAM       /* SDRAM DIMM SPD info printout */
+
+/* Commands from default set we don't need */
+#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
+#undef CONFIG_CMD_SETGETDCR    /* DCR support on 4xx           */
 
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
@@ -206,15 +193,15 @@
        "bootm"
 #endif /* CONFIG_BOOT_ROOT_NFS */
 
-/* Add support for a few extra bootp options like:
- *     - File size
- *     - DNS
+/*
+ * BOOTP options
  */
-#define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT | \
-                                CONFIG_BOOTP_BOOTFILESIZE | \
-                                CONFIG_BOOTP_DNS)
-
-
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
 
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
@@ -285,7 +272,6 @@
 
 #define SDRAM_SPD_ADDR 0x50
 
-
 /*-----------------------------------------------------------------------
  * BR2,BR3 - Base Register
  *     Ref: Section 10.3.1 on page 10-14
@@ -383,7 +369,6 @@
 #error "INVALID SDRAM CONFIGURATION"
 #endif
 
-
 #define RS232EN_1              0x02000002
 #define RS232EN_2              0x01000001
 #define FETHIEN                        0x08000008
@@ -395,7 +380,6 @@
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET     CFG_GBL_DATA_OFFSET
 
-
 /* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2)  */
 /* 0x0EB2B645 */
 #define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP )                             |\
@@ -452,13 +436,11 @@
 #  define CFG_ENV_SIZE         0x200
 #endif /* CFG_RAMBOOT */
 
-
 #define CFG_CACHELINE_SIZE     32      /* For MPC8260 CPU */
 #if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
 #endif
 
-
 /*-----------------------------------------------------------------------
  * HIDx - Hardware Implementation-dependent Registers                   2-11
  *-----------------------------------------------------------------------