Convert CONFIG_BZIP2 et al to Kconfig

[oweals/u-boot.git] / include / configs / M5475EVB.h

diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index be863ec4ef560edb0ee61ca1402b69f67096a312..406830c98d56da4dc501e59805b939ebe4d247f3 100644 (file)
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Freescale MCF5475 board.
  *
  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -21,36 +20,20 @@
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
-#define CONFIG_BAUDRATE                115200
 
 #undef CONFIG_HW_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT        5000    /* timeout in milliseconds, max timeout is 6.71sec */
 
-/* Command line configuration */
-#undef CONFIG_CMD_DATE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_REGINFO
-
 #define CONFIG_SLTTMR
 
-#define CONFIG_FSLDMAFEC
 #ifdef CONFIG_FSLDMAFEC
-#      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_HAS_ETH1
-
 #      define CONFIG_SYS_DMA_USE_INTSRAM       1
 #      define CONFIG_SYS_DISCOVER_PHY
 #      define CONFIG_SYS_RX_ETH_BUFFER 32
 #      define CONFIG_SYS_TX_ETH_BUFFER 48
 #      define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#      define CONFIG_SYS_FEC0_PINMUX           0
-#      define CONFIG_SYS_FEC0_MIIBASE          CONFIG_SYS_FEC0_IOBASE
-#      define CONFIG_SYS_FEC1_PINMUX           0
-#      define CONFIG_SYS_FEC1_MIIBASE          CONFIG_SYS_FEC0_IOBASE
-
-#      define MCFFEC_TOUT_LOOP         50000
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #      ifndef CONFIG_SYS_DISCOVER_PHY
 #              define FECDUPLEX        FULL
@@ -65,17 +48,12 @@
 #      define CONFIG_NETMASK   255.255.255.0
 #      define CONFIG_SERVERIP  192.162.1.1
 #      define CONFIG_GATEWAYIP 192.162.1.1
-
 #endif
 
 #ifdef CONFIG_CMD_USB
 #      define CONFIG_USB_OHCI_NEW
 
-#      ifndef CONFIG_CMD_PCI
-#              define CONFIG_CMD_PCI
-#      endif
 #      define CONFIG_PCI_OHCI
-#      define CONFIG_DOS_PARTITION
 
 #      undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 #      undef CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -94,8 +72,6 @@
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI             1
-#define CONFIG_PCI_PNP         1
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE        1
 
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
@@ -122,7 +98,7 @@
 #      define CONFIG_GATEWAYIP 192.162.1.1
 #endif                         /* FEC_ENET */
 
-#define CONFIG_HOSTNAME                M547xEVB
+#define CONFIG_HOSTNAME                "M547xEVB"
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "netdev=eth0\0"                         \
        "loadaddr=10000\0"                      \
@@ -136,17 +112,7 @@
        ""
 
 #define CONFIG_PRAM            512     /* 512 KB */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
 
-#ifdef CONFIG_CMD_KGDB
-#      define CONFIG_SYS_CBSIZE        1024    /* Console I/O Buffer Size */
-#else
-#      define CONFIG_SYS_CBSIZE        256     /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR           0x00010000
 
 #define CONFIG_SYS_CLK                 CONFIG_SYS_BUSCLK
@@ -193,9 +159,6 @@
 #      define CONFIG_SYS_SDRAM_SIZE    CONFIG_SYS_DRAMSZ
 #endif
 
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE + 0x400
-#define CONFIG_SYS_MEMTEST_END         ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
-
 #define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor */
 
@@ -213,14 +176,10 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
 #      define CONFIG_SYS_FLASH_BASE            (CONFIG_SYS_CS0_BASE)
-#      define CONFIG_FLASH_CFI_DRIVER  1
 #      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 #      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
-#      define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
-#      define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #ifdef CONFIG_SYS_NOR1SZ
 #      define CONFIG_SYS_MAX_FLASH_BANKS       2       /* max number of memory banks */
 #      define CONFIG_SYS_FLASH_SIZE            ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20)
@@ -236,9 +195,6 @@
  * First time runing may have env crc error warning if there is
  * no correct environment on the flash.
  */
-#define CONFIG_ENV_OFFSET              0x40000
-#define CONFIG_ENV_SECT_SIZE   0x10000
-#define CONFIG_ENV_IS_IN_FLASH 1
 
 /*-----------------------------------------------------------------------
  * Cache Configuration