apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / M54455EVB.h

diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index c7a9e1347927fe3356e04cc8677c34a8dbb0a8c9..d73101f96c5e1a4f6b011a781f2802c4c9e0845d 100644 (file)
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Freescale MCF54455 EVB board.
  *
  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -22,7 +21,8 @@
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
-#define CONFIG_BAUDRATE                115200
+
+#define LDS_BOARD_TEXT                  board/freescale/m54455evb/sbf_dram_init.o (.text*)
 
 #undef CONFIG_WATCHDOG
 
@@ -32,21 +32,10 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Command line configuration */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_PCI
-#define CONFIG_CMD_REGINFO
 
 /* Network configuration */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
 #      define CONFIG_SYS_RX_ETH_BUFFER 8
@@ -59,7 +48,6 @@
 #      define MCFFEC_TOUT_LOOP 50000
 #      define CONFIG_HAS_ETH1
 
-#      define CONFIG_BOOTARGS          "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
 #      define CONFIG_ETHPRIME          "FEC0"
 #      define CONFIG_IPADDR            192.162.1.2
 #      define CONFIG_NETMASK           255.255.255.0
@@ -77,7 +65,7 @@
 #      endif                   /* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
-#define CONFIG_HOSTNAME                M54455EVB
+#define CONFIG_HOSTNAME                "M54455EVB"
 #ifdef CONFIG_SYS_STMICRO_BOOT
 /* ST Micro serial flash */
 #define        CONFIG_SYS_LOAD_ADDR2           0x40010013
@@ -119,8 +107,6 @@
 #endif
 
 /* ATA configuration */
-#define CONFIG_ISO_PARTITION
-#define CONFIG_DOS_PARTITION
 #define CONFIG_IDE_RESET       1
 #define CONFIG_IDE_PREINIT     1
 #define CONFIG_ATAPI
@@ -155,25 +141,11 @@
 #define CONFIG_SYS_IMMR                CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
-#define CONFIG_CF_SPI
 #define CONFIG_CF_DSPI
-#define CONFIG_HARD_SPI
 #define CONFIG_SYS_SBFHDR_SIZE         0x13
-#ifdef CONFIG_CMD_SPI
-
-#      define CONFIG_SYS_DSPI_CTAR0            (DSPI_CTAR_TRSZ(7) | \
-                                        DSPI_CTAR_PCSSCK_1CLK | \
-                                        DSPI_CTAR_PASC(0) | \
-                                        DSPI_CTAR_PDT(0) | \
-                                        DSPI_CTAR_CSSCK(0) | \
-                                        DSPI_CTAR_ASC(0) | \
-                                        DSPI_CTAR_DT(1))
-#endif
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI             1
-#define CONFIG_PCI_PNP         1
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE        1
 
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4
@@ -193,7 +165,6 @@
 
 /* FPGA - Spartan 2 */
 /* experiment
-#define CONFIG_FPGA
 #define CONFIG_FPGA_COUNT      1
 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 #define CONFIG_SYS_FPGA_CHECK_CTRLC
@@ -204,17 +175,6 @@
 
 #define CONFIG_PRAM            2048    /* 2048 KB */
 
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE                      1024    /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE                      256     /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
-
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x10000)
 
 #define CONFIG_SYS_MBAR                0xFC000000
@@ -278,12 +238,6 @@
  * Environment is not embedded in u-boot. First time runing may have env
  * crc error warning if there is no correct environment on the flash.
  */
-#ifdef CONFIG_CF_SBF
-#      define CONFIG_ENV_IS_IN_SPI_FLASH
-#      define CONFIG_ENV_SPI_CS                1
-#else
-#      define CONFIG_ENV_IS_IN_FLASH   1
-#endif
 #undef CONFIG_ENV_OVERWRITE
 
 /*-----------------------------------------------------------------------
@@ -313,16 +267,12 @@
 #      define CONFIG_ENV_SECT_SIZE     0x20000
 #endif
 
-#define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
 
-#      define CONFIG_FLASH_CFI_DRIVER  1
-#      define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 #      define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 #      define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_8BIT
 #      define CONFIG_SYS_MAX_FLASH_BANKS       2       /* max number of memory banks */
 #      define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
-#      define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 #      define CONFIG_SYS_FLASH_CHECKSUM
 #      define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 #      define CONFIG_FLASH_CFI_LEGACY