edminiv2: add mvsata_ide and cmd_ide support

[oweals/u-boot.git] / include / configs / HH405.h

diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index ed9a235f6e52f61e27589f4d6057add44d1ea6af..01e0bc65eccedf36c7370c89b4d76c75fb4db25d 100644 (file)
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -331,6 +331,7 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C                        /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #if 0 /* test-only */
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
 #else
@@ -413,23 +414,6 @@
 
 #define CONFIG_SYS_FPGA_BASE_ADDR 0xF0100100       /* FPGA internal Base Address       */
 
-/* FPGA internal regs */
-#define CONFIG_SYS_FPGA_CTRL           0x000
-
-/* FPGA Control Reg */
-#define CONFIG_SYS_FPGA_CTRL_REV0      0x0001
-#define CONFIG_SYS_FPGA_CTRL_REV1      0x0002
-#define CONFIG_SYS_FPGA_CTRL_VGA0_BL   0x0004
-#define CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE 0x0008
-#define CONFIG_SYS_FPGA_CTRL_CF_RESET  0x0040
-#define CONFIG_SYS_FPGA_CTRL_PS2_PWR   0x0080
-#define CONFIG_SYS_FPGA_CTRL_CF_PWRN   0x0100      /* low active                    */
-#define CONFIG_SYS_FPGA_CTRL_CF_BUS_EN 0x0200
-#define CONFIG_SYS_FPGA_CTRL_LCD_CLK   0x7000      /* Mask for lcd clock            */
-#define CONFIG_SYS_FPGA_CTRL_OW_ENABLE 0x8000
-
-#define CONFIG_SYS_FPGA_STATUS_CF_DETECT 0x8000
-
 #define LCD_CLK_OFF             0x0000      /* Off                           */
 #define LCD_CLK_02083           0x1000      /* 2.083 MHz                     */
 #define LCD_CLK_03135           0x2000      /* 3.135 MHz                     */