#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
#define GTREGREAD(x) 0xffffffff /* needed for debug */
/*
* (easy to change)
*/
+#define CONFIG_SYS_TEXT_BASE 0xFFF00000
+
/* these hardware addresses are pretty bogus, please change them to
suit your needs */
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
/*
* Command line configuration.
#define CONFIG_CMD_PCI
#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_SCSI
#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_FDC
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FDC
#define CONFIG_CMD_ELF
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
/*
* choose between COM1 and COM2 as serial console
#define CONFIG_CONS_INDEX 1
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */
-#define CFG_LOAD_ADDR 0x1000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
-#define CFG_HZ 1000 /* dec. freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
#define CONFIG_MISC_INIT_R
/*
* Choose the address mapping scheme for the MPC106 mem controller.
* Default is mapping B (CHRP), set this define to choose mapping A (PReP).
*/
-#define CFG_ADDRESS_MAP_A
-#ifdef CFG_ADDRESS_MAP_A
+#define CONFIG_SYS_ADDRESS_MAP_A
+#ifdef CONFIG_SYS_ADDRESS_MAP_A
-#define CFG_PCI_MEMORY_BUS 0x80000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x80000000
+#define CONFIG_SYS_PCI_MEMORY_BUS 0x80000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
-#define CFG_PCI_MEM_BUS 0x00000000
-#define CFG_PCI_MEM_PHYS 0xc0000000
-#define CFG_PCI_MEM_SIZE 0x3f000000
+#define CONFIG_SYS_PCI_MEM_BUS 0x00000000
+#define CONFIG_SYS_PCI_MEM_PHYS 0xc0000000
+#define CONFIG_SYS_PCI_MEM_SIZE 0x3f000000
-#define CFG_ISA_MEM_BUS 0
-#define CFG_ISA_MEM_PHYS 0
-#define CFG_ISA_MEM_SIZE 0
+#define CONFIG_SYS_ISA_MEM_BUS 0
+#define CONFIG_SYS_ISA_MEM_PHYS 0
+#define CONFIG_SYS_ISA_MEM_SIZE 0
-#define CFG_PCI_IO_BUS 0x1000
-#define CFG_PCI_IO_PHYS 0x81000000
-#define CFG_PCI_IO_SIZE 0x01000000-CFG_PCI_IO_BUS
+#define CONFIG_SYS_PCI_IO_BUS 0x1000
+#define CONFIG_SYS_PCI_IO_PHYS 0x81000000
+#define CONFIG_SYS_PCI_IO_SIZE 0x01000000-CONFIG_SYS_PCI_IO_BUS
-#define CFG_ISA_IO_BUS 0x00000000
-#define CFG_ISA_IO_PHYS 0x80000000
-#define CFG_ISA_IO_SIZE 0x00800000
+#define CONFIG_SYS_ISA_IO_BUS 0x00000000
+#define CONFIG_SYS_ISA_IO_PHYS 0x80000000
+#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
#else
-#define CFG_PCI_MEMORY_BUS 0x00000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x40000000
+#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000
-#define CFG_PCI_MEM_BUS 0x80000000
-#define CFG_PCI_MEM_PHYS 0x80000000
-#define CFG_PCI_MEM_SIZE 0x7d000000
+#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000
+#define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000
-#define CFG_ISA_MEM_BUS 0x00000000
-#define CFG_ISA_MEM_PHYS 0xfd000000
-#define CFG_ISA_MEM_SIZE 0x01000000
+#define CONFIG_SYS_ISA_MEM_BUS 0x00000000
+#define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000
+#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000
-#define CFG_PCI_IO_BUS 0x00800000
-#define CFG_PCI_IO_PHYS 0xfe800000
-#define CFG_PCI_IO_SIZE 0x00400000
+#define CONFIG_SYS_PCI_IO_BUS 0x00800000
+#define CONFIG_SYS_PCI_IO_PHYS 0xfe800000
+#define CONFIG_SYS_PCI_IO_SIZE 0x00400000
-#define CFG_ISA_IO_BUS 0x00000000
-#define CFG_ISA_IO_PHYS 0xfe000000
-#define CFG_ISA_IO_SIZE 0x00800000
+#define CONFIG_SYS_ISA_IO_BUS 0x00000000
+#define CONFIG_SYS_ISA_IO_PHYS 0xfe000000
+#define CONFIG_SYS_ISA_IO_SIZE 0x00800000
-#endif /*CFG_ADDRESS_MAP_A */
+#endif /*CONFIG_SYS_ADDRESS_MAP_A */
-#define CFG_60X_PCI_MEM_OFFSET 0x00000000
+#define CONFIG_SYS_60X_PCI_MEM_OFFSET 0x00000000
/* driver defines FDC,IDE,... */
-#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
-#define CFG_ISA_IO CFG_ISA_IO_PHYS
-#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS
/*
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xfff00000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_FLASH_BASE 0xfff00000
/*
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
-#define CFG_INIT_RAM_END 0x4000
-#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x4000
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*
* Flash mapping/organization on the MPC10x.
#define FLASH_BASE0_PRELIM 0xff800000
#define FLASH_BASE1_PRELIM 0xffc00000
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
/*
* JFFS2 partitions
*
*/
/* No command line, one static partition */
-#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
* Note: fake mtd_id used, no linux mtd map file
*/
/*
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT "nor0=bab7xx-0"
#define MTDPARTS_DEFAULT "mtdparts=bab7xx-0:-(jffs2)"
*/
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
-#undef CFG_MEMTEST
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */
+#undef CONFIG_SYS_MEMTEST
/*
* Environment settings
*/
#define CONFIG_ENV_OVERWRITE
-#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#define CFG_NVRAM_SIZE 0x1ff0 /* NVRAM size (8kB), we must protect the clock data (16 bytes) */
-#define CFG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */
+#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#define CONFIG_SYS_NVRAM_SIZE 0x1ff0 /* NVRAM size (8kB), we must protect the clock data (16 bytes) */
+#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */
/*
* We store the environment and an image of revision eeprom in the upper part of the NVRAM. Thus,
* user applications can use the remaining space for other purposes.
*/
-#define CFG_ENV_ADDR (CFG_NVRAM_SIZE +0x10 -0x800)
-#define CFG_NV_SROM_COPY_ADDR (CFG_NVRAM_SIZE +0x10 -0x400)
-#define CFG_NVRAM_ACCESS_ROUTINE /* This board needs a special routine to access the NVRAM */
-#define CFG_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_SIZE +0x10 -0x800)
+#define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_SYS_NVRAM_SIZE +0x10 -0x400)
+#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* This board needs a special routine to access the NVRAM */
+#define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */
/*
* Serial devices
*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK 1843200
-#define CFG_NS16550_COM1 (CFG_ISA_IO + CFG_NS87308_UART1_BASE)
-#define CFG_NS16550_COM2 (CFG_ISA_IO + CFG_NS87308_UART2_BASE)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK 1843200
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
/*
* PCI stuff
*/
#define CONFIG_PCI /* include pci support */
+#define CONFIG_SYS_EARLY_PCI_INIT
#define CONFIG_PCI_PNP /* pci plug-and-play */
#define CONFIG_PCI_HOST PCI_HOST_AUTO
#undef CONFIG_PCI_SCAN_SHOW
#define CONFIG_CONSOLE_TIME
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_CONSOLE_CURSOR
-#define CFG_CONSOLE_BLINK_COUNT 30000 /* approx. 2 HZ */
+#define CONFIG_SYS_CONSOLE_BLINK_COUNT 30000 /* approx. 2 HZ */
/*
* IDE/SCSI globals
* ATAPI Support (experimental)
*/
#define CONFIG_ATAPI
-#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */
-#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */
+#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-#define CFG_ATA_BASE_ADDR CFG_60X_PCI_IO_OFFSET /* base address */
-#define CFG_ATA_IDE0_OFFSET 0x1F0 /* default ide0 offste */
-#define CFG_ATA_IDE1_OFFSET 0x170 /* default ide1 offset */
-#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */
-#define CFG_ATA_REG_OFFSET 0 /* reg offset */
-#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */
+#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_60X_PCI_IO_OFFSET /* base address */
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1F0 /* default ide0 offste */
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 /* default ide1 offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */
#define ATA_RESET_TIME (ata_reset_time)
*/
#define CONFIG_SCSI_SYM53C8XX
#define CONFIG_SCSI_DEV_ID (scsi_dev_id) /* 875 or 860 */
-#define CFG_SCSI_SYM53C8XX_CCF (scsi_sym53c8xx_ccf) /* value for none 40 mhz clocks */
-#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */
-#define CFG_SCSI_MAX_SCSI_ID (scsi_max_scsi_id) /* max SCSI ID (0-6) */
-#define CFG_SCSI_MAX_DEVICE (15 * CFG_SCSI_MAX_LUN) /* max. Target devices */
-#define CFG_SCSI_SPIN_UP_TIME (scsi_reset_time)
+#define CONFIG_SYS_SCSI_SYM53C8XX_CCF (scsi_sym53c8xx_ccf) /* value for none 40 mhz clocks */
+#define CONFIG_SYS_SCSI_MAX_LUN 8 /* number of supported LUNs */
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID (scsi_max_scsi_id) /* max SCSI ID (0-6) */
+#define CONFIG_SYS_SCSI_MAX_DEVICE (15 * CONFIG_SYS_SCSI_MAX_LUN) /* max. Target devices */
+#define CONFIG_SYS_SCSI_SPIN_UP_TIME (scsi_reset_time)
/*
* Partion suppport
/*
* Winbond Configuration
*/
-#define CFG_WINBOND_83C553 1 /* has a winbond bridge */
-#define CFG_USE_WINBOND_IDE 0 /* use winbond 83c553 internal ide */
-#define CFG_WINBOND_ISA_CFG_ADDR 0x80005800 /* pci-isa bridge config addr */
-#define CFG_WINBOND_IDE_CFG_ADDR 0x80005900 /* ide config addr */
+#define CONFIG_WINBOND_83C553 1 /* has a winbond bridge */
+#define CONFIG_SYS_USE_WINBOND_IDE 0 /* use winbond 83c553 internal ide */
+#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /* pci-isa bridge config addr */
+#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /* ide config addr */
/*
* NS87308 Configuration
*/
-#define CFG_NS87308 /* Nat Semi super-io cntr on ISA bus */
-#define CFG_NS87308_BADDR_10 1
-#define CFG_NS87308_DEVS (CFG_NS87308_UART1 | \
- CFG_NS87308_UART2 | \
- CFG_NS87308_KBC1 | \
- CFG_NS87308_MOUSE | \
- CFG_NS87308_FDC | \
- CFG_NS87308_RARP | \
- CFG_NS87308_GPIO | \
- CFG_NS87308_POWRMAN | \
- CFG_NS87308_RTC_APC )
-
-#define CFG_NS87308_PS2MOD
-#define CFG_NS87308_GPIO_BASE 0x0220
-#define CFG_NS87308_PWMAN_BASE 0x0460
-#define CFG_NS87308_PMC2 0x00 /* SuperI/O clock source is 24MHz via X1 */
+#define CONFIG_NS87308 /* Nat Semi super-io cntr on ISA bus */
+#define CONFIG_SYS_NS87308_BADDR_10 1
+#define CONFIG_SYS_NS87308_DEVS (CONFIG_SYS_NS87308_UART1 | \
+ CONFIG_SYS_NS87308_UART2 | \
+ CONFIG_SYS_NS87308_KBC1 | \
+ CONFIG_SYS_NS87308_MOUSE | \
+ CONFIG_SYS_NS87308_FDC | \
+ CONFIG_SYS_NS87308_RARP | \
+ CONFIG_SYS_NS87308_GPIO | \
+ CONFIG_SYS_NS87308_POWRMAN | \
+ CONFIG_SYS_NS87308_RTC_APC )
+
+#define CONFIG_SYS_NS87308_PS2MOD
+#define CONFIG_SYS_NS87308_GPIO_BASE 0x0220
+#define CONFIG_SYS_NS87308_PWMAN_BASE 0x0460
+#define CONFIG_SYS_NS87308_PMC2 0x00 /* SuperI/O clock source is 24MHz via X1 */
/*
* set up the NVRAM access registers
* NVRAM's controlled by the configurable CS line from the 87308
*/
-#define CFG_NS87308_CS0_BASE 0x0076
-#define CFG_NS87308_CS0_CONF 0x40
-#define CFG_NS87308_CS1_BASE 0x0070
-#define CFG_NS87308_CS1_CONF 0x1C
-#define CFG_NS87308_CS2_BASE 0x0071
-#define CFG_NS87308_CS2_CONF 0x1C
+#define CONFIG_SYS_NS87308_CS0_BASE 0x0076
+#define CONFIG_SYS_NS87308_CS0_CONF 0x40
+#define CONFIG_SYS_NS87308_CS1_BASE 0x0070
+#define CONFIG_SYS_NS87308_CS1_CONF 0x1C
+#define CONFIG_SYS_NS87308_CS2_BASE 0x0071
+#define CONFIG_SYS_NS87308_CS2_CONF 0x1C
#define CONFIG_RTC_MK48T59
*/
#if 1
-#define CFG_IBAT0L 0
-#define CFG_IBAT0U 0
-#define CFG_DBAT0L CFG_IBAT1L
-#define CFG_DBAT0U CFG_IBAT1U
+#define CONFIG_SYS_IBAT0L 0
+#define CONFIG_SYS_IBAT0U 0
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
-#define CFG_IBAT1L 0
-#define CFG_IBAT1U 0
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L 0
+#define CONFIG_SYS_IBAT1U 0
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CFG_IBAT2L 0
-#define CFG_IBAT2U 0
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
+#define CONFIG_SYS_IBAT2L 0
+#define CONFIG_SYS_IBAT2U 0
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CFG_IBAT3L 0
-#define CFG_IBAT3U 0
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L 0
+#define CONFIG_SYS_IBAT3U 0
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
#else
/* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_RW)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L CFG_IBAT1L
-#define CFG_DBAT0U CFG_IBAT1U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
/* address range for flashes */
-#define CFG_IBAT1L (CFG_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U (CFG_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
/* ISA IO space */
-#define CFG_IBAT2L (CFG_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (CFG_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
/* ISA memory space */
-#define CFG_IBAT3L (CFG_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (CFG_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
#endif
extern unsigned long bab7xx_get_bus_freq (void);
extern unsigned long bab7xx_get_gclk_freq (void);
#endif
-#define CFG_BUS_HZ bab7xx_get_bus_freq()
-#define CFG_BUS_CLK CFG_BUS_HZ
-#define CFG_CPU_CLK bab7xx_get_gclk_freq()
+#define CONFIG_SYS_BUS_CLK bab7xx_get_bus_freq()
+#define CONFIG_SYS_CPU_CLK bab7xx_get_gclk_freq()
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* L2 Cache Configuration is board specific for BAB740/BAB750
* Init values read from revision srom.
*/
-#undef CFG_L2
+#undef CONFIG_SYS_L2
#define L2_INIT (L2CR_L2SIZ_HM | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
#define L2_ENABLE (L2_INIT | L2CR_L2E)
-#define CFG_L2_BAB7xx
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
+#define CONFIG_SYS_L2_BAB7xx
-#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_TULIP
#define CONFIG_TULIP_SELECT_MEDIA