#define CONFIG_MPC8245 1
#define CONFIG_A3000 1
+#define CONFIG_SYS_TEXT_BASE 0xFFF00000
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 9600
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 5
/*
* Miscellaneous configurable options
*/
-#undef CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "A3000> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#undef CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "A3000> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size
*/
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS 8 /* Max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x00400000 /* Default load address */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* Default load address */
/*-----------------------------------------------------------------------
* PCI stuff
*/
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
/*-----------------------------------------------------------------------
* PCI stuff
#undef CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
-#define CONFIG_NET_MULTI /* Multi ethernet cards support */
/* #define CONFIG_TULIP */
/* #define CONFIG_EEPRO100 */
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank on RCS#0 */
-#define CFG_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */
-#define CFG_FLASH_BASE CFG_FLASH_BASE0_PRELIM
-#define CFG_FLASH_BANKS { CFG_FLASH_BASE0_PRELIM }
+#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank on RCS#0 */
+#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH_BASE0_PRELIM
+#define CONFIG_SYS_FLASH_BANKS { CONFIG_SYS_FLASH_BASE0_PRELIM }
/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
* reset vector is actually located at FFB00100, but the 8245
* takes care of us.
*/
-#define CFG_RESET_ADDRESS 0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-#define CFG_EUMB_ADDR 0xFC000000
+#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
-#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
/* Maximum amount of RAM.
*/
-#define CFG_MAX_RAM_SIZE 0x04000000 /* 0 .. 128 MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 0 .. 128 MB of (S)DRAM */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
#else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
#endif
/*
* NS16550 Configuration
*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area
*/
-/* #define CFG_MONITOR_BASE TEXT_BASE */
-/*#define CFG_GBL_DATA_SIZE 256*/
-#define CFG_GBL_DATA_SIZE 128
-#define CFG_INIT_RAM_ADDR 0x40000000
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
*/
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-#define CFG_HZ 1000
+#define CONFIG_SYS_HZ 1000
/* Bit-field values for MCCR1.
*/
-#define CFG_ROMNAL 7
-#define CFG_ROMFAL 11
-#define CFG_DBUS_SIZE 0x3
+#define CONFIG_SYS_ROMNAL 7
+#define CONFIG_SYS_ROMFAL 11
+#define CONFIG_SYS_DBUS_SIZE 0x3
/* Bit-field values for MCCR2.
*/
-#define CFG_TSWAIT 0x5 /* Transaction Start Wait States timer */
-#define CFG_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
+#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */
+#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
*/
-#define CFG_BSTOPRE 121
+#define CONFIG_SYS_BSTOPRE 121
/* Bit-field values for MCCR3.
*/
-#define CFG_REFREC 8 /* Refresh to activate interval */
+#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
/* Bit-field values for MCCR4.
*/
-#define CFG_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */
-#define CFG_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
-#define CFG_ACTORW 3 /* FIXME was 2 */
-#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
+#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */
+#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
+#define CONFIG_SYS_ACTORW 3 /* FIXME was 2 */
+#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM 1
+#define CONFIG_SYS_REGDIMM 0
-#define CFG_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
-#define CFG_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
+#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
/* Memory bank settings.
* Only bits 20-29 are actually used from these vales to set the
* address. Refer to the MPC8240 book.
*/
-#define CFG_BANK0_START 0x00000000
-#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE 1
-#define CFG_BANK1_START 0x3ff00000
-#define CFG_BANK1_END 0x3fffffff
-#define CFG_BANK1_ENABLE 0
-#define CFG_BANK2_START 0x3ff00000
-#define CFG_BANK2_END 0x3fffffff
-#define CFG_BANK2_ENABLE 0
-#define CFG_BANK3_START 0x3ff00000
-#define CFG_BANK3_END 0x3fffffff
-#define CFG_BANK3_ENABLE 0
-#define CFG_BANK4_START 0x3ff00000
-#define CFG_BANK4_END 0x3fffffff
-#define CFG_BANK4_ENABLE 0
-#define CFG_BANK5_START 0x3ff00000
-#define CFG_BANK5_END 0x3fffffff
-#define CFG_BANK5_ENABLE 0
-#define CFG_BANK6_START 0x3ff00000
-#define CFG_BANK6_END 0x3fffffff
-#define CFG_BANK6_ENABLE 0
-#define CFG_BANK7_START 0x3ff00000
-#define CFG_BANK7_END 0x3fffffff
-#define CFG_BANK7_ENABLE 0
-
-#define CFG_ODCR 0xff
-
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L CFG_IBAT0L
-#define CFG_DBAT0U CFG_IBAT0U
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START 0x00000000
+#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE 1
+#define CONFIG_SYS_BANK1_START 0x3ff00000
+#define CONFIG_SYS_BANK1_END 0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE 0
+#define CONFIG_SYS_BANK2_START 0x3ff00000
+#define CONFIG_SYS_BANK2_END 0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE 0
+#define CONFIG_SYS_BANK3_START 0x3ff00000
+#define CONFIG_SYS_BANK3_END 0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE 0
+#define CONFIG_SYS_BANK4_START 0x3ff00000
+#define CONFIG_SYS_BANK4_END 0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE 0
+#define CONFIG_SYS_BANK5_START 0x3ff00000
+#define CONFIG_SYS_BANK5_END 0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE 0
+#define CONFIG_SYS_BANK6_START 0x3ff00000
+#define CONFIG_SYS_BANK6_END 0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE 0
+#define CONFIG_SYS_BANK7_START 0x3ff00000
+#define CONFIG_SYS_BANK7_END 0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE 0
+
+#define CONFIG_SYS_ODCR 0xff
+
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CFG_MAX_FLASH_SECT 128 /* Max number of sectors per flash */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max number of sectors per flash */
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
/* Warining: environment is not EMBEDDED in the U-Boot code.
* It's stored in flash separately.
*/
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR 0xFFFE0000
-#define CFG_ENV_SIZE 0x00020000 /* Size of the Environment */
-#define CFG_ENV_SECT_SIZE 0x00020000 /* Size of the Environment Sector */
+#define CONFIG_ENV_ADDR 0xFFFE0000
+#define CONFIG_ENV_SIZE 0x00020000 /* Size of the Environment */
+#define CONFIG_ENV_SECT_SIZE 0x00020000 /* Size of the Environment Sector */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32
+#define CONFIG_SYS_CACHELINE_SIZE 32
#if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
#endif /* __CONFIG_H */