It's a string of the EXT4 file name. This file use to store the
environment (explicit path to the file)
-if ARCH_SUNXI
+if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
config ENV_OFFSET
hex "Environment Offset"
depends on !ENV_IS_IN_UBI
depends on !ENV_IS_NOWHERE
+ default 0x3f8000 if ARCH_ROCKCHIP
default 0x88000 if ARCH_SUNXI
+ default 0xE0000 if ARCH_ZYNQ
+ default 0x1E00000 if ARCH_ZYNQMP
help
Offset from the start of the device (or partition)
config ENV_SIZE
hex "Environment Size"
- depends on !ENV_IS_NOWHERE
- default 0x20000 if ARCH_SUNXI
+ default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP
+ default 0x20000 if ARCH_SUNXI || ARCH_ZYNQ
+ default 0x8000 if ARCH_ROCKCHIP || ARCH_ZYNQMP || ARCH_VERSAL
help
Size of the environment storage area
+config ENV_SECT_SIZE
+ hex "Environment Sector-Size"
+ depends on !ENV_IS_NOWHERE && (ARCH_ZYNQ || ARCH_ZYNQMP)
+ default 0x40000 if ARCH_ZYNQMP
+ default 0x20000 if ARCH_ZYNQ
+ help
+ Size of the sector containing the environment.
+
config ENV_UBI_PART
string "UBI partition name"
depends on ENV_IS_IN_UBI
endif
-if ARCH_ROCKCHIP
-
-config ENV_OFFSET
- hex
- depends on !ENV_IS_IN_UBI
- depends on !ENV_IS_NOWHERE
- default 0x3f8000
- help
- Offset from the start of the device (or partition)
-
-config ENV_SIZE
- hex
- default 0x8000
- help
- Size of the environment storage area
-
-endif
-
-if ARCH_ZYNQMP || ARCH_ZYNQ
-
-config ENV_OFFSET
- hex "Environment Offset"
- depends on !ENV_IS_NOWHERE
- default 0x1E00000 if ARCH_ZYNQMP
- default 0xE0000 if ARCH_ZYNQ
- help
- Offset from the start of the device (or partition)
-
-config ENV_SIZE
- hex "Environment Size"
- default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP
- default 0x8000 if ARCH_ZYNQMP
- default 0x20000 if ARCH_ZYNQ
- help
- Size of the environment storage area.
-
-config ENV_SECT_SIZE
- hex "Environment Sector-Size"
- depends on !ENV_IS_NOWHERE
- default 0x40000 if ARCH_ZYNQMP
- default 0x20000 if ARCH_ZYNQ
- help
- Size of the sector containing the environment.
-
-endif
-
config USE_DEFAULT_ENV_FILE
bool "Create default environment from file"
help
run-time determined information about the hardware to the
environment. These will be named board_name, board_rev.
+if SPL_ENV_SUPPORT
+config SPL_ENV_IS_NOWHERE
+ bool "SPL Environment is not stored"
+ default y if ENV_IS_NOWHERE
+ help
+ Similar to ENV_IS_NOWHERE, used for SPL environment.
+
+config SPL_ENV_IS_IN_MMC
+ bool "SPL Environment in an MMC device"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_MMC
+ default y
+ help
+ Similar to ENV_IS_IN_MMC, used for SPL environment.
+
+config SPL_ENV_IS_IN_FAT
+ bool "SPL Environment is in a FAT filesystem"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FAT
+ default y
+ help
+ Similar to ENV_IS_IN_FAT, used for SPL environment.
+
+config SPL_ENV_IS_IN_EXT4
+ bool "SPL Environment is in a EXT4 filesystem"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_EXT4
+ default y
+ help
+ Similar to ENV_IS_IN_EXT4, used for SPL environment.
+
+config SPL_ENV_IS_IN_NAND
+ bool "SPL Environment in a NAND device"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_NAND
+ default y
+ help
+ Similar to ENV_IS_IN_NAND, used for SPL environment.
+
+config SPL_ENV_IS_IN_SPI_FLASH
+ bool "SPL Environment is in SPI flash"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_SPI_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_SPI_FLASH, used for SPL environment.
+
+config SPL_ENV_IS_IN_FLASH
+ bool "SPL Environment in flash memory"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_FLASH, used for SPL environment.
+
+endif
+
+if TPL_ENV_SUPPORT
+
+config TPL_ENV_IS_NOWHERE
+ bool "TPL Environment is not stored"
+ default y if ENV_IS_NOWHERE
+ help
+ Similar to ENV_IS_NOWHERE, used for TPL environment.
+
+config TPL_ENV_IS_IN_MMC
+ bool "TPL Environment in an MMC device"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_MMC
+ default y
+ help
+ Similar to ENV_IS_IN_MMC, used for TPL environment.
+
+config TPL_ENV_IS_IN_FAT
+ bool "TPL Environment is in a FAT filesystem"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FAT
+ default y
+ help
+ Similar to ENV_IS_IN_FAT, used for TPL environment.
+
+config TPL_ENV_IS_IN_EXT4
+ bool "TPL Environment is in a EXT4 filesystem"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_EXT4
+ default y
+ help
+ Similar to ENV_IS_IN_EXT4, used for TPL environment.
+
+config TPL_ENV_IS_IN_NAND
+ bool "TPL Environment in a NAND device"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_NAND
+ default y
+ help
+ Similar to ENV_IS_IN_NAND, used for TPL environment.
+
+config TPL_ENV_IS_IN_SPI_FLASH
+ bool "TPL Environment is in SPI flash"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_SPI_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_SPI_FLASH, used for TPL environment.
+
+config TPL_ENV_IS_IN_FLASH
+ bool "TPL Environment in flash memory"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_FLASH, used for TPL environment.
+
+endif
+
endmenu