menu "Environment"
-choice
- prompt "Select the location of the environment"
- default ENV_IS_IN_MMC if ARCH_SUNXI
- default ENV_IS_IN_MMC if ARCH_UNIPHIER
- default ENV_IS_IN_MMC if ARCH_EXYNOS4
- default ENV_IS_IN_MMC if MX6SX || MX7D
- default ENV_IS_IN_MMC if TEGRA30 || TEGRA124
- default ENV_IS_IN_MMC if TEGRA_ARMV8_COMMON
- default ENV_IS_IN_FLASH if ARCH_CINTEGRATOR
- default ENV_IS_IN_FLASH if ARCH_INTEGRATOR_CP
- default ENV_IS_IN_FLASH if M548x || M547x || M5282 || MCF547x_8x
- default ENV_IS_IN_FLASH if MCF532x || MCF52x2
- default ENV_IS_IN_FLASH if MPC86xx || MPC83xx
- default ENV_IS_IN_FLASH if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641
- default ENV_IS_IN_FLASH if SH && !CPU_SH4
- default ENV_IS_IN_SPI_FLASH if ARMADA_XP
- default ENV_IS_IN_SPI_FLASH if INTEL_BAYTRAIL
- default ENV_IS_IN_SPI_FLASH if INTEL_BROADWELL
- default ENV_IS_IN_SPI_FLASH if NORTHBRIDGE_INTEL_IVYBRIDGE
- default ENV_IS_IN_SPI_FLASH if INTEL_QUARK
- default ENV_IS_IN_SPI_FLASH if INTEL_QUEENSBAY
- default ENV_IS_IN_FAT if ARCH_BCM283X
- default ENV_IS_IN_FAT if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS
- default ENV_IS_NOWHERE
- help
- At present the environment can be stored in only one place. Use this
- option to select the location. This is either a device (where the
- environemnt information is simply written to a fixed location or
- partition on the device) or a filesystem (where the environment
- information is written to a file).
-
config ENV_IS_NOWHERE
bool "Environment is not stored"
+ depends on !ENV_IS_IN_EEPROM
+ depends on !ENV_IS_IN_EXT4
+ depends on !ENV_IS_IN_FAT
+ depends on !ENV_IS_IN_FLASH
+ depends on !ENV_IS_IN_MMC
+ depends on !ENV_IS_IN_NAND
+ depends on !ENV_IS_IN_NVRAM
+ depends on !ENV_IS_IN_ONENAND
+ depends on !ENV_IS_IN_REMOTE
+ depends on !ENV_IS_IN_SPI_FLASH
+ depends on !ENV_IS_IN_UBI
+ default y
help
Define this if you don't want to or can't have an environment stored
- on a storage medium. In this case the environemnt will still exist
+ on a storage medium. In this case the environment will still exist
while U-Boot is running, but once U-Boot exits it will not be
stored. U-Boot will therefore always start up with a default
environment.
-config ENV_IS_IN_DATAFLASH
- bool "Environment in dataflash"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have a DataFlash memory device which you
- want to use for the environment.
-
- - CONFIG_ENV_OFFSET:
- - CONFIG_ENV_ADDR:
- - CONFIG_ENV_SIZE:
-
- These three #defines specify the offset and size of the
- environment area within the total memory of your DataFlash placed
- at the specified address.
-
config ENV_IS_IN_EEPROM
bool "Environment in EEPROM"
depends on !CHAIN_OF_TRUST
config ENV_IS_IN_FAT
bool "Environment is in a FAT filesystem"
depends on !CHAIN_OF_TRUST
+ default y if ARCH_BCM283X
+ default y if ARCH_SUNXI && MMC
+ default y if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS
+ select FS_FAT
select FAT_WRITE
help
Define this if you want to use the FAT file system for the environment.
- - CONFIG_FAT_WRITE:
- This must be enabled. Otherwise it cannot save the environment file.
+config ENV_IS_IN_EXT4
+ bool "Environment is in a EXT4 filesystem"
+ depends on !CHAIN_OF_TRUST
+ select EXT4_WRITE
+ help
+ Define this if you want to use the EXT4 file system for the environment.
config ENV_IS_IN_FLASH
bool "Environment in flash memory"
depends on !CHAIN_OF_TRUST
+ default y if ARCH_CINTEGRATOR
+ default y if ARCH_INTEGRATOR_CP
+ default y if M548x || M547x || M5282 || MCF547x_8x
+ default y if MCF532x || MCF52x2
+ default y if MPC86xx || MPC83xx
+ default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641
+ default y if SH && !CPU_SH4
help
Define this if you have a flash device which you want to use for the
environment.
config ENV_IS_IN_MMC
bool "Environment in an MMC device"
depends on !CHAIN_OF_TRUST
+ depends on MMC
+ default y if ARCH_EXYNOS4
+ default y if MX6SX || MX7D
+ default y if TEGRA30 || TEGRA124
+ default y if TEGRA_ARMV8_COMMON
help
Define this if you have an MMC device which you want to use for the
environment.
provision.
config ENV_IS_IN_REMOTE
- bool "Environment is in remove memory space"
+ bool "Environment is in remote memory space"
depends on !CHAIN_OF_TRUST
help
Define this if you have a remote memory space which you
config ENV_IS_IN_SPI_FLASH
bool "Environment is in SPI flash"
depends on !CHAIN_OF_TRUST
+ default y if ARMADA_XP
+ default y if INTEL_BAYTRAIL
+ default y if INTEL_BRASWELL
+ default y if INTEL_BROADWELL
+ default y if NORTHBRIDGE_INTEL_IVYBRIDGE
+ default y if INTEL_QUARK
+ default y if INTEL_QUEENSBAY
help
Define this if you have a SPI Flash memory device which you
want to use for the environment.
during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
aligned to an erase sector boundary.
- - CONFIG_ENV_SPI_BUS (optional):
- - CONFIG_ENV_SPI_CS (optional):
+config USE_ENV_SPI_BUS
+ bool "SPI flash bus for environment"
+ depends on ENV_IS_IN_SPI_FLASH
+ help
+ Force the SPI bus for environment.
+ If not defined, use CONFIG_SF_DEFAULT_BUS.
- Define the SPI bus and chip select. If not defined they will be 0.
+config ENV_SPI_BUS
+ int "Value of SPI flash bus for environment"
+ depends on USE_ENV_SPI_BUS
+ help
+ Value the SPI bus and chip select for environment.
- - CONFIG_ENV_SPI_MAX_HZ (optional):
+config USE_ENV_SPI_CS
+ bool "SPI flash chip select for environment"
+ depends on ENV_IS_IN_SPI_FLASH
+ help
+ Force the SPI chip select for environment.
+ If not defined, use CONFIG_SF_DEFAULT_CS.
- Define the SPI max work clock. If not defined then use 1MHz.
+config ENV_SPI_CS
+ int "Value of SPI flash chip select for environment"
+ depends on USE_ENV_SPI_CS
+ help
+ Value of the SPI chip select for environment.
- - CONFIG_ENV_SPI_MODE (optional):
+config USE_ENV_SPI_MAX_HZ
+ bool "SPI flash max frequency for environment"
+ depends on ENV_IS_IN_SPI_FLASH
+ help
+ Force the SPI max work clock for environment.
+ If not defined, use CONFIG_SF_DEFAULT_SPEED.
- Define the SPI work mode. If not defined then use SPI_MODE_3.
+config ENV_SPI_MAX_HZ
+ int "Value of SPI flash max frequency for environment"
+ depends on USE_ENV_SPI_MAX_HZ
+ help
+ Value of the SPI max work clock for environment.
+
+config USE_ENV_SPI_MODE
+ bool "SPI flash mode for environment"
+ depends on ENV_IS_IN_SPI_FLASH
+ help
+ Force the SPI work mode for environment.
+
+config ENV_SPI_MODE
+ hex "Value of SPI flash work mode for environment"
+ depends on USE_ENV_SPI_MODE
+ help
+ Value of the SPI work mode for environment.
+ See include/spi.h for value.
config ENV_IS_IN_UBI
bool "Environment in a UBI volume"
the environment in. This will enable redundant environments in UBI.
It is assumed that both volumes are in the same MTD partition.
- - CONFIG_UBI_SILENCE_MSG
- - CONFIG_UBIFS_SILENCE_MSG
-
- You will probably want to define these to avoid a really noisy system
- when storing the env in UBI.
-
-endchoice
-
config ENV_FAT_INTERFACE
string "Name of the block device for the environment"
depends on ENV_IS_IN_FAT
+ default "mmc" if ARCH_SUNXI
default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91
help
Define this to a string that is the name of the block device.
depends on ENV_IS_IN_FAT
default "0:1" if TI_COMMON_CMD_OPTIONS
default "0:auto" if ARCH_ZYNQMP
+ default "0:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
+ default "1:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
default "0" if ARCH_AT91
help
Define this to a string to specify the partition of the device. It can
partition table then means device D.
config ENV_FAT_FILE
- string "Name of the FAT file to use for the environemnt"
+ string "Name of the FAT file to use for the environment"
depends on ENV_IS_IN_FAT
default "uboot.env"
help
It's a string of the FAT file name. This file use to store the
environment.
-if ARCH_SUNXI
+config ENV_EXT4_INTERFACE
+ string "Name of the block device for the environment"
+ depends on ENV_IS_IN_EXT4
+ help
+ Define this to a string that is the name of the block device.
+
+config ENV_EXT4_DEVICE_AND_PART
+ string "Device and partition for where to store the environemt in EXT4"
+ depends on ENV_IS_IN_EXT4
+ help
+ Define this to a string to specify the partition of the device. It can
+ be as following:
+
+ "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
+ - "D:P": device D partition P. Error occurs if device D has no
+ partition table.
+ - "D:0": device D.
+ - "D" or "D:": device D partition 1 if device D has partition
+ table, or the whole device D if has no partition
+ table.
+ - "D:auto": first partition in device D with bootable flag set.
+ If none, first valid partition in device D. If no
+ partition table then means device D.
+
+config ENV_EXT4_FILE
+ string "Name of the EXT4 file to use for the environment"
+ depends on ENV_IS_IN_EXT4
+ default "uboot.env"
+ help
+ It's a string of the EXT4 file name. This file use to store the
+ environment (explicit path to the file)
+
+if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARC || ARCH_STM32MP
config ENV_OFFSET
hex "Environment Offset"
depends on !ENV_IS_IN_UBI
depends on !ENV_IS_NOWHERE
+ default 0x3f8000 if ARCH_ROCKCHIP
default 0x88000 if ARCH_SUNXI
+ default 0xE0000 if ARCH_ZYNQ
+ default 0x1E00000 if ARCH_ZYNQMP
+ default 0 if ARC
help
Offset from the start of the device (or partition)
config ENV_SIZE
hex "Environment Size"
- depends on !ENV_IS_NOWHERE
- default 0x20000 if ARCH_SUNXI
+ default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP
+ default 0x20000 if ARCH_SUNXI || ARCH_ZYNQ
+ default 0x8000 if ARCH_ROCKCHIP || ARCH_ZYNQMP || ARCH_VERSAL
+ default 0x4000 if ARC
help
Size of the environment storage area
+config ENV_SECT_SIZE
+ hex "Environment Sector-Size"
+ depends on !ENV_IS_NOWHERE && (ARCH_ZYNQ || ARCH_ZYNQMP)
+ default 0x40000 if ARCH_ZYNQMP
+ default 0x20000 if ARCH_ZYNQ
+ help
+ Size of the sector containing the environment.
+
config ENV_UBI_PART
string "UBI partition name"
depends on ENV_IS_IN_UBI
endif
+config USE_DEFAULT_ENV_FILE
+ bool "Create default environment from file"
+ help
+ Normally, the default environment is automatically generated
+ based on the settings of various CONFIG_* options, as well
+ as the CONFIG_EXTRA_ENV_SETTINGS. By selecting this option,
+ you can instead define the entire default environment in an
+ external file.
+
+config DEFAULT_ENV_FILE
+ string "Path to default environment file"
+ depends on USE_DEFAULT_ENV_FILE
+ help
+ The path containing the default environment. The format is
+ the same as accepted by the mkenvimage tool: lines
+ containing key=value pairs, blank lines and lines beginning
+ with # are ignored.
+
+config ENV_VARS_UBOOT_RUNTIME_CONFIG
+ bool "Add run-time information to the environment"
+ help
+ Enable this in order to add variables describing certain
+ run-time determined information about the hardware to the
+ environment. These will be named board_name, board_rev.
+
+if SPL_ENV_SUPPORT
+config SPL_ENV_IS_NOWHERE
+ bool "SPL Environment is not stored"
+ default y if ENV_IS_NOWHERE
+ help
+ Similar to ENV_IS_NOWHERE, used for SPL environment.
+
+config SPL_ENV_IS_IN_MMC
+ bool "SPL Environment in an MMC device"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_MMC
+ default y
+ help
+ Similar to ENV_IS_IN_MMC, used for SPL environment.
+
+config SPL_ENV_IS_IN_FAT
+ bool "SPL Environment is in a FAT filesystem"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FAT
+ default y
+ help
+ Similar to ENV_IS_IN_FAT, used for SPL environment.
+
+config SPL_ENV_IS_IN_EXT4
+ bool "SPL Environment is in a EXT4 filesystem"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_EXT4
+ default y
+ help
+ Similar to ENV_IS_IN_EXT4, used for SPL environment.
+
+config SPL_ENV_IS_IN_NAND
+ bool "SPL Environment in a NAND device"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_NAND
+ default y
+ help
+ Similar to ENV_IS_IN_NAND, used for SPL environment.
+
+config SPL_ENV_IS_IN_SPI_FLASH
+ bool "SPL Environment is in SPI flash"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_SPI_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_SPI_FLASH, used for SPL environment.
+
+config SPL_ENV_IS_IN_FLASH
+ bool "SPL Environment in flash memory"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_FLASH, used for SPL environment.
+
+endif
+
+if TPL_ENV_SUPPORT
+
+config TPL_ENV_IS_NOWHERE
+ bool "TPL Environment is not stored"
+ default y if ENV_IS_NOWHERE
+ help
+ Similar to ENV_IS_NOWHERE, used for TPL environment.
+
+config TPL_ENV_IS_IN_MMC
+ bool "TPL Environment in an MMC device"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_MMC
+ default y
+ help
+ Similar to ENV_IS_IN_MMC, used for TPL environment.
+
+config TPL_ENV_IS_IN_FAT
+ bool "TPL Environment is in a FAT filesystem"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FAT
+ default y
+ help
+ Similar to ENV_IS_IN_FAT, used for TPL environment.
+
+config TPL_ENV_IS_IN_EXT4
+ bool "TPL Environment is in a EXT4 filesystem"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_EXT4
+ default y
+ help
+ Similar to ENV_IS_IN_EXT4, used for TPL environment.
+
+config TPL_ENV_IS_IN_NAND
+ bool "TPL Environment in a NAND device"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_NAND
+ default y
+ help
+ Similar to ENV_IS_IN_NAND, used for TPL environment.
+
+config TPL_ENV_IS_IN_SPI_FLASH
+ bool "TPL Environment is in SPI flash"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_SPI_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_SPI_FLASH, used for TPL environment.
+
+config TPL_ENV_IS_IN_FLASH
+ bool "TPL Environment in flash memory"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_FLASH, used for TPL environment.
+
+endif
+
endmenu