config ENV_IS_NOWHERE
bool "Environment is not stored"
depends on !ENV_IS_IN_EEPROM
+ depends on !ENV_IS_IN_EXT4
depends on !ENV_IS_IN_FAT
depends on !ENV_IS_IN_FLASH
depends on !ENV_IS_IN_MMC
default y
help
Define this if you don't want to or can't have an environment stored
- on a storage medium. In this case the environemnt will still exist
+ on a storage medium. In this case the environment will still exist
while U-Boot is running, but once U-Boot exits it will not be
stored. U-Boot will therefore always start up with a default
environment.
bool "Environment in an MMC device"
depends on !CHAIN_OF_TRUST
depends on MMC
- default y if ARCH_SUNXI
default y if ARCH_EXYNOS4
default y if MX6SX || MX7D
default y if TEGRA30 || TEGRA124
provision.
config ENV_IS_IN_REMOTE
- bool "Environment is in remove memory space"
+ bool "Environment is in remote memory space"
depends on !CHAIN_OF_TRUST
help
Define this if you have a remote memory space which you
during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
aligned to an erase sector boundary.
- - CONFIG_ENV_SPI_BUS (optional):
- - CONFIG_ENV_SPI_CS (optional):
+config USE_ENV_SPI_BUS
+ bool "SPI flash bus for environment"
+ depends on ENV_IS_IN_SPI_FLASH
+ help
+ Force the SPI bus for environment.
+ If not defined, use CONFIG_SF_DEFAULT_BUS.
- Define the SPI bus and chip select. If not defined they will be 0.
+config ENV_SPI_BUS
+ int "Value of SPI flash bus for environment"
+ depends on USE_ENV_SPI_BUS
+ help
+ Value the SPI bus and chip select for environment.
- - CONFIG_ENV_SPI_MAX_HZ (optional):
+config USE_ENV_SPI_CS
+ bool "SPI flash chip select for environment"
+ depends on ENV_IS_IN_SPI_FLASH
+ help
+ Force the SPI chip select for environment.
+ If not defined, use CONFIG_SF_DEFAULT_CS.
- Define the SPI max work clock. If not defined then use 1MHz.
+config ENV_SPI_CS
+ int "Value of SPI flash chip select for environment"
+ depends on USE_ENV_SPI_CS
+ help
+ Value of the SPI chip select for environment.
- - CONFIG_ENV_SPI_MODE (optional):
+config USE_ENV_SPI_MAX_HZ
+ bool "SPI flash max frequency for environment"
+ depends on ENV_IS_IN_SPI_FLASH
+ help
+ Force the SPI max work clock for environment.
+ If not defined, use CONFIG_SF_DEFAULT_SPEED.
- Define the SPI work mode. If not defined then use SPI_MODE_3.
+config ENV_SPI_MAX_HZ
+ int "Value of SPI flash max frequency for environment"
+ depends on USE_ENV_SPI_MAX_HZ
+ help
+ Value of the SPI max work clock for environment.
+
+config USE_ENV_SPI_MODE
+ bool "SPI flash mode for environment"
+ depends on ENV_IS_IN_SPI_FLASH
+ help
+ Force the SPI work mode for environment.
+
+config ENV_SPI_MODE
+ hex "Value of SPI flash work mode for environment"
+ depends on USE_ENV_SPI_MODE
+ help
+ Value of the SPI work mode for environment.
+ See include/spi.h for value.
config ENV_IS_IN_UBI
bool "Environment in a UBI volume"
the environment in. This will enable redundant environments in UBI.
It is assumed that both volumes are in the same MTD partition.
- - CONFIG_UBI_SILENCE_MSG
- - CONFIG_UBIFS_SILENCE_MSG
-
- You will probably want to define these to avoid a really noisy system
- when storing the env in UBI.
-
config ENV_FAT_INTERFACE
string "Name of the block device for the environment"
depends on ENV_IS_IN_FAT
partition table then means device D.
config ENV_FAT_FILE
- string "Name of the FAT file to use for the environemnt"
+ string "Name of the FAT file to use for the environment"
depends on ENV_IS_IN_FAT
default "uboot.env"
help
partition table then means device D.
config ENV_EXT4_FILE
- string "Name of the EXT4 file to use for the environemnt"
+ string "Name of the EXT4 file to use for the environment"
depends on ENV_IS_IN_EXT4
default "uboot.env"
help
It's a string of the EXT4 file name. This file use to store the
environment (explicit path to the file)
-if ARCH_SUNXI
+if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARC || ARCH_STM32MP
config ENV_OFFSET
hex "Environment Offset"
depends on !ENV_IS_IN_UBI
depends on !ENV_IS_NOWHERE
+ default 0x3f8000 if ARCH_ROCKCHIP
default 0x88000 if ARCH_SUNXI
+ default 0xE0000 if ARCH_ZYNQ
+ default 0x1E00000 if ARCH_ZYNQMP
+ default 0 if ARC
help
Offset from the start of the device (or partition)
config ENV_SIZE
hex "Environment Size"
- depends on !ENV_IS_NOWHERE
- default 0x20000 if ARCH_SUNXI
+ default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP
+ default 0x20000 if ARCH_SUNXI || ARCH_ZYNQ
+ default 0x8000 if ARCH_ROCKCHIP || ARCH_ZYNQMP || ARCH_VERSAL
+ default 0x4000 if ARC
help
Size of the environment storage area
+config ENV_SECT_SIZE
+ hex "Environment Sector-Size"
+ depends on !ENV_IS_NOWHERE && (ARCH_ZYNQ || ARCH_ZYNQMP)
+ default 0x40000 if ARCH_ZYNQMP
+ default 0x20000 if ARCH_ZYNQ
+ help
+ Size of the sector containing the environment.
+
config ENV_UBI_PART
string "UBI partition name"
depends on ENV_IS_IN_UBI
endif
-if ARCH_ROCKCHIP
+config USE_DEFAULT_ENV_FILE
+ bool "Create default environment from file"
+ help
+ Normally, the default environment is automatically generated
+ based on the settings of various CONFIG_* options, as well
+ as the CONFIG_EXTRA_ENV_SETTINGS. By selecting this option,
+ you can instead define the entire default environment in an
+ external file.
+
+config DEFAULT_ENV_FILE
+ string "Path to default environment file"
+ depends on USE_DEFAULT_ENV_FILE
+ help
+ The path containing the default environment. The format is
+ the same as accepted by the mkenvimage tool: lines
+ containing key=value pairs, blank lines and lines beginning
+ with # are ignored.
+
+config ENV_VARS_UBOOT_RUNTIME_CONFIG
+ bool "Add run-time information to the environment"
+ help
+ Enable this in order to add variables describing certain
+ run-time determined information about the hardware to the
+ environment. These will be named board_name, board_rev.
+
+if SPL_ENV_SUPPORT
+config SPL_ENV_IS_NOWHERE
+ bool "SPL Environment is not stored"
+ default y if ENV_IS_NOWHERE
+ help
+ Similar to ENV_IS_NOWHERE, used for SPL environment.
-config ENV_OFFSET
- hex
- depends on !ENV_IS_IN_UBI
- depends on !ENV_IS_NOWHERE
- default 0x3f8000
+config SPL_ENV_IS_IN_MMC
+ bool "SPL Environment in an MMC device"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_MMC
+ default y
help
- Offset from the start of the device (or partition)
+ Similar to ENV_IS_IN_MMC, used for SPL environment.
-config ENV_SIZE
- hex
- default 0x8000
+config SPL_ENV_IS_IN_FAT
+ bool "SPL Environment is in a FAT filesystem"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FAT
+ default y
help
- Size of the environment storage area
+ Similar to ENV_IS_IN_FAT, used for SPL environment.
+
+config SPL_ENV_IS_IN_EXT4
+ bool "SPL Environment is in a EXT4 filesystem"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_EXT4
+ default y
+ help
+ Similar to ENV_IS_IN_EXT4, used for SPL environment.
+
+config SPL_ENV_IS_IN_NAND
+ bool "SPL Environment in a NAND device"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_NAND
+ default y
+ help
+ Similar to ENV_IS_IN_NAND, used for SPL environment.
+
+config SPL_ENV_IS_IN_SPI_FLASH
+ bool "SPL Environment is in SPI flash"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_SPI_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_SPI_FLASH, used for SPL environment.
+
+config SPL_ENV_IS_IN_FLASH
+ bool "SPL Environment in flash memory"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_FLASH, used for SPL environment.
+
+endif
+
+if TPL_ENV_SUPPORT
+
+config TPL_ENV_IS_NOWHERE
+ bool "TPL Environment is not stored"
+ default y if ENV_IS_NOWHERE
+ help
+ Similar to ENV_IS_NOWHERE, used for TPL environment.
+
+config TPL_ENV_IS_IN_MMC
+ bool "TPL Environment in an MMC device"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_MMC
+ default y
+ help
+ Similar to ENV_IS_IN_MMC, used for TPL environment.
+
+config TPL_ENV_IS_IN_FAT
+ bool "TPL Environment is in a FAT filesystem"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FAT
+ default y
+ help
+ Similar to ENV_IS_IN_FAT, used for TPL environment.
+
+config TPL_ENV_IS_IN_EXT4
+ bool "TPL Environment is in a EXT4 filesystem"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_EXT4
+ default y
+ help
+ Similar to ENV_IS_IN_EXT4, used for TPL environment.
+
+config TPL_ENV_IS_IN_NAND
+ bool "TPL Environment in a NAND device"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_NAND
+ default y
+ help
+ Similar to ENV_IS_IN_NAND, used for TPL environment.
+
+config TPL_ENV_IS_IN_SPI_FLASH
+ bool "TPL Environment is in SPI flash"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_SPI_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_SPI_FLASH, used for TPL environment.
+
+config TPL_ENV_IS_IN_FLASH
+ bool "TPL Environment in flash memory"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_FLASH, used for TPL environment.
endif