+// SPDX-License-Identifier: GPL-2.0+
/*
* Freescale i.MX23/i.MX28 LCDIF driver
*
* Copyright (C) 2011-2013 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <linux/errno.h>
#include <malloc.h>
+#include <video.h>
#include <video_fb.h>
-#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-
#include <asm/mach-imx/dma.h>
+#include <asm/io.h>
#include "videomodes.h"
#define PS2KHZ(ps) (1000000000UL / (ps))
+#define HZ2PS(hz) (1000000000UL / ((hz) / 1000))
+
+#define BITS_PP 18
+#define BYTES_PP 4
-static GraphicDevice panel;
struct mxs_dma_desc desc;
/**
* le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0
*/
-static void mxs_lcd_init(GraphicDevice *panel,
- struct ctfb_res_modes *mode, int bpp)
+static void mxs_lcd_init(u32 fb_addr, struct ctfb_res_modes *mode, int bpp)
{
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
uint32_t word_len = 0, bus_width = 0;
writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | mode->xres,
®s->hw_lcdif_vdctrl4);
- writel(panel->frameAdrs, ®s->hw_lcdif_cur_buf);
- writel(panel->frameAdrs, ®s->hw_lcdif_next_buf);
+ writel(fb_addr, ®s->hw_lcdif_cur_buf);
+ writel(fb_addr, ®s->hw_lcdif_next_buf);
/* Flush FIFO first */
writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set);
writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set);
}
-void lcdif_power_down(void)
+static int mxs_probe_common(struct ctfb_res_modes *mode, int bpp, u32 fb)
+{
+ /* Start framebuffer */
+ mxs_lcd_init(fb, mode, bpp);
+
+#ifdef CONFIG_VIDEO_MXS_MODE_SYSTEM
+ /*
+ * If the LCD runs in system mode, the LCD refresh has to be triggered
+ * manually by setting the RUN bit in HW_LCDIF_CTRL register. To avoid
+ * having to set this bit manually after every single change in the
+ * framebuffer memory, we set up specially crafted circular DMA, which
+ * sets the RUN bit, then waits until it gets cleared and repeats this
+ * infinitelly. This way, we get smooth continuous updates of the LCD.
+ */
+ struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
+
+ memset(&desc, 0, sizeof(struct mxs_dma_desc));
+ desc.address = (dma_addr_t)&desc;
+ desc.cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
+ MXS_DMA_DESC_WAIT4END |
+ (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+ desc.cmd.pio_words[0] = readl(®s->hw_lcdif_ctrl) | LCDIF_CTRL_RUN;
+ desc.cmd.next = (uint32_t)&desc.cmd;
+
+ /* Execute the DMA chain. */
+ mxs_dma_circ_start(MXS_DMA_CHANNEL_AHB_APBH_LCDIF, &desc);
+#endif
+
+ return 0;
+}
+
+static int mxs_remove_common(u32 fb)
{
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
int timeout = 1000000;
- if (!panel.frameAdrs)
- return;
+ if (!fb)
+ return -EINVAL;
- writel(panel.frameAdrs, ®s->hw_lcdif_cur_buf_reg);
- writel(panel.frameAdrs, ®s->hw_lcdif_next_buf_reg);
+ writel(fb, ®s->hw_lcdif_cur_buf_reg);
+ writel(fb, ®s->hw_lcdif_next_buf_reg);
writel(LCDIF_CTRL1_VSYNC_EDGE_IRQ, ®s->hw_lcdif_ctrl1_clr);
while (--timeout) {
if (readl(®s->hw_lcdif_ctrl1_reg) &
udelay(1);
}
mxs_reset_block((struct mxs_register_32 *)®s->hw_lcdif_ctrl_reg);
+
+ return 0;
+}
+
+#ifndef CONFIG_DM_VIDEO
+
+static GraphicDevice panel;
+
+void lcdif_power_down(void)
+{
+ mxs_remove_common(panel.frameAdrs);
}
void *video_hw_init(void)
{
int bpp = -1;
+ int ret = 0;
char *penv;
- void *fb;
+ void *fb = NULL;
struct ctfb_res_modes mode;
puts("Video: ");
/* Suck display configuration from "videomode" variable */
- penv = getenv("videomode");
+ penv = env_get("videomode");
if (!penv) {
puts("MXSFB: 'videomode' variable not set!\n");
return NULL;
bpp = video_get_params(&mode, penv);
/* fill in Graphic device struct */
- sprintf(panel.modeIdent, "%dx%dx%d",
- mode.xres, mode.yres, bpp);
+ sprintf(panel.modeIdent, "%dx%dx%d", mode.xres, mode.yres, bpp);
panel.winSizeX = mode.xres;
panel.winSizeY = mode.yres;
printf("%s\n", panel.modeIdent);
- /* Start framebuffer */
- mxs_lcd_init(&panel, &mode, bpp);
+ ret = mxs_probe_common(&mode, bpp, (u32)fb);
+ if (ret)
+ goto dealloc_fb;
-#ifdef CONFIG_VIDEO_MXS_MODE_SYSTEM
- /*
- * If the LCD runs in system mode, the LCD refresh has to be triggered
- * manually by setting the RUN bit in HW_LCDIF_CTRL register. To avoid
- * having to set this bit manually after every single change in the
- * framebuffer memory, we set up specially crafted circular DMA, which
- * sets the RUN bit, then waits until it gets cleared and repeats this
- * infinitelly. This way, we get smooth continuous updates of the LCD.
- */
- struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
+ return (void *)&panel;
- memset(&desc, 0, sizeof(struct mxs_dma_desc));
- desc.address = (dma_addr_t)&desc;
- desc.cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
- MXS_DMA_DESC_WAIT4END |
- (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
- desc.cmd.pio_words[0] = readl(®s->hw_lcdif_ctrl) | LCDIF_CTRL_RUN;
- desc.cmd.next = (uint32_t)&desc.cmd;
+dealloc_fb:
+ free(fb);
- /* Execute the DMA chain. */
- mxs_dma_circ_start(MXS_DMA_CHANNEL_AHB_APBH_LCDIF, &desc);
-#endif
+ return NULL;
+}
+#else /* ifndef CONFIG_DM_VIDEO */
- return (void *)&panel;
+static int mxs_of_get_timings(struct udevice *dev,
+ struct display_timing *timings,
+ u32 *bpp)
+{
+ int ret = 0;
+ u32 display_phandle;
+ ofnode display_node;
+
+ ret = ofnode_read_u32(dev_ofnode(dev), "display", &display_phandle);
+ if (ret) {
+ dev_err(dev, "required display property isn't provided\n");
+ return -EINVAL;
+ }
+
+ display_node = ofnode_get_by_phandle(display_phandle);
+ if (!ofnode_valid(display_node)) {
+ dev_err(dev, "failed to find display subnode\n");
+ return -EINVAL;
+ }
+
+ ret = ofnode_read_u32(display_node, "bits-per-pixel", bpp);
+ if (ret) {
+ dev_err(dev,
+ "required bits-per-pixel property isn't provided\n");
+ return -EINVAL;
+ }
+
+ ret = ofnode_decode_display_timing(display_node, 0, timings);
+ if (ret) {
+ dev_err(dev, "failed to get any display timings\n");
+ return -EINVAL;
+ }
+
+ return ret;
}
+
+static int mxs_video_probe(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ struct ctfb_res_modes mode;
+ struct display_timing timings;
+ u32 bpp = 0;
+ u32 fb_start, fb_end;
+ int ret;
+
+ debug("%s() plat: base 0x%lx, size 0x%x\n",
+ __func__, plat->base, plat->size);
+
+ ret = mxs_of_get_timings(dev, &timings, &bpp);
+ if (ret)
+ return ret;
+
+ mode.xres = timings.hactive.typ;
+ mode.yres = timings.vactive.typ;
+ mode.left_margin = timings.hback_porch.typ;
+ mode.right_margin = timings.hfront_porch.typ;
+ mode.upper_margin = timings.vback_porch.typ;
+ mode.lower_margin = timings.vfront_porch.typ;
+ mode.hsync_len = timings.hsync_len.typ;
+ mode.vsync_len = timings.vsync_len.typ;
+ mode.pixclock = HZ2PS(timings.pixelclock.typ);
+
+ ret = mxs_probe_common(&mode, bpp, plat->base);
+ if (ret)
+ return ret;
+
+ switch (bpp) {
+ case 32:
+ case 24:
+ case 18:
+ uc_priv->bpix = VIDEO_BPP32;
+ break;
+ case 16:
+ uc_priv->bpix = VIDEO_BPP16;
+ break;
+ case 8:
+ uc_priv->bpix = VIDEO_BPP8;
+ break;
+ default:
+ dev_err(dev, "invalid bpp specified (bpp = %i)\n", bpp);
+ return -EINVAL;
+ }
+
+ uc_priv->xsize = mode.xres;
+ uc_priv->ysize = mode.yres;
+
+ /* Enable dcache for the frame buffer */
+ fb_start = plat->base & ~(MMU_SECTION_SIZE - 1);
+ fb_end = plat->base + plat->size;
+ fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT);
+ mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start,
+ DCACHE_WRITEBACK);
+ video_set_flush_dcache(dev, true);
+
+ return ret;
+}
+
+static int mxs_video_bind(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct display_timing timings;
+ u32 bpp = 0;
+ u32 bytes_pp = 0;
+ int ret;
+
+ ret = mxs_of_get_timings(dev, &timings, &bpp);
+ if (ret)
+ return ret;
+
+ switch (bpp) {
+ case 32:
+ case 24:
+ case 18:
+ bytes_pp = 4;
+ break;
+ case 16:
+ bytes_pp = 2;
+ break;
+ case 8:
+ bytes_pp = 1;
+ break;
+ default:
+ dev_err(dev, "invalid bpp specified (bpp = %i)\n", bpp);
+ return -EINVAL;
+ }
+
+ plat->size = timings.hactive.typ * timings.vactive.typ * bytes_pp;
+
+ return 0;
+}
+
+static int mxs_video_remove(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+
+ mxs_remove_common(plat->base);
+
+ return 0;
+}
+
+static const struct udevice_id mxs_video_ids[] = {
+ { .compatible = "fsl,imx23-lcdif" },
+ { .compatible = "fsl,imx28-lcdif" },
+ { .compatible = "fsl,imx7ulp-lcdif" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(mxs_video) = {
+ .name = "mxs_video",
+ .id = UCLASS_VIDEO,
+ .of_match = mxs_video_ids,
+ .bind = mxs_video_bind,
+ .probe = mxs_video_probe,
+ .remove = mxs_video_remove,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+#endif /* ifndef CONFIG_DM_VIDEO */
projects / oweals / u-boot.git / blobdiff