config VIDEO_BPP8
bool "Support 8-bit-per-pixel displays"
depends on DM_VIDEO
- default y if DM_VIDEO
+ default y
help
Support drawing text and bitmaps onto a 8-bit-per-pixel display.
Enabling this will include code to support this display. Without
config VIDEO_BPP16
bool "Support 16-bit-per-pixel displays"
depends on DM_VIDEO
- default y if DM_VIDEO
+ default y
help
Support drawing text and bitmaps onto a 16-bit-per-pixel display.
Enabling this will include code to support this display. Without
config VIDEO_BPP32
bool "Support 32-bit-per-pixel displays"
depends on DM_VIDEO
- default y if DM_VIDEO
+ default y
help
Support drawing text and bitmaps onto a 32-bit-per-pixel display.
Enabling this will include code to support this display. Without
config VIDEO_ANSI
bool "Support ANSI escape sequences in video console"
depends on DM_VIDEO
- default y if DM_VIDEO
+ default y
help
Enable ANSI escape sequence decoding for a more fully functional
console.
+config VIDEO_MIPI_DSI
+ bool "Support MIPI DSI interface"
+ depends on DM_VIDEO
+ help
+ Support MIPI DSI interface for driving a MIPI compatible device.
+ The MIPI Display Serial Interface (MIPI DSI) defines a high-speed
+ serial interface between a host processor and a display module.
+
config CONSOLE_NORMAL
bool "Support a simple text console"
depends on DM_VIDEO
config SYS_WHITE_ON_BLACK
bool "Display console as white on a black background"
- default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || TEGRA || X86
+ default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || ARCH_TEGRA || X86 || ARCH_SUNXI
help
Normally the display is black on a white background, Enable this
option to invert this, i.e. white on a black background. This can be
from a parallel LCD interface and translate it on the fy into a DP
interface for driving eDP TFT displays. It uses I2C for configuration.
+config VIDEO_LCD_ORISETECH_OTM8009A
+ bool "OTM8009A DSI LCD panel support"
+ depends on DM_VIDEO
+ select VIDEO_MIPI_DSI
+ default n
+ help
+ Say Y here if you want to enable support for Orise Technology
+ otm8009a 480x800 dsi 2dl panel.
+
+config VIDEO_LCD_RAYDIUM_RM68200
+ bool "RM68200 DSI LCD panel support"
+ depends on DM_VIDEO
+ select VIDEO_MIPI_DSI
+ default n
+ help
+ Say Y here if you want to enable support for Raydium RM68200
+ 720x1280 DSI video mode panel.
+
config VIDEO_LCD_SSD2828
bool "SSD2828 bridge chip"
default n
option takes a string in the format understood by 'name_to_gpio'
function, e.g. PH1 for pin 1 of port H.
+source "drivers/video/meson/Kconfig"
+
config VIDEO_MVEBU
bool "Armada XP LCD controller"
default n
help
HLCDC supports video output to an attached LCD panel.
+config AM335X_LCD
+ bool "Enable AM335x video support"
+ depends on DM_VIDEO
+ help
+ Supports video output to an attached LCD panel.
+
config LOGICORE_DP_TX
bool "Enable Logicore DP TX driver"
depends on DISPLAY
config VIDEO_FSL_DCU_FB
bool "Enable Freescale Display Control Unit"
- depends on VIDEO
+ depends on VIDEO || DM_VIDEO
help
This enables support for Freescale Display Control Unit (DCU4)
module found on Freescale Vybrid and QorIQ family of SoCs.
source "drivers/video/bridge/Kconfig"
+source "drivers/video/imx/Kconfig"
+
config VIDEO
bool "Enable legacy video support"
depends on !DM_VIDEO
model. Video drivers typically provide a colour text console and
cursor.
-config VIDEO_IPUV3
- bool "i.MX IPUv3 Core video support"
- depends on VIDEO && MX6
- help
- This enables framebuffer driver for i.MX processors working
- on the IPUv3(Image Processing Unit) internal graphic processor.
-
config CFB_CONSOLE
bool "Enable colour frame buffer console"
depends on VIDEO
rather requires a SoC-specific glue driver to call it), it
can not be enabled from the configuration menu.
+config VIDEO_DSI_HOST_SANDBOX
+ bool "Enable sandbox for dsi host"
+ depends on SANDBOX
+ select VIDEO_MIPI_DSI
+ help
+ Enable support for sandbox dsi host device used for testing
+ purposes.
+ Display Serial Interface (DSI) defines a serial bus and
+ a communication protocol between the host and the device
+ (panel, bridge).
+
+config VIDEO_DW_MIPI_DSI
+ bool
+ select VIDEO_MIPI_DSI
+ help
+ Enables the common driver code for the Synopsis Designware
+ MIPI DSI block found in SoCs from various vendors.
+ As this does not provide any functionality by itself (but
+ rather requires a SoC-specific glue driver to call it), it
+ can not be enabled from the configuration menu.
+
config VIDEO_SIMPLE
bool "Simple display driver for preconfigured display"
help