+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
*/
#include <common.h>
#include <usb.h>
#include <errno.h>
#include <linux/compiler.h>
-#include <usb/ehci-fsl.h>
+#include <usb/ehci-ci.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/mx5x_pins.h>
#include "ehci.h"
-#include "ehci-core.h"
#define MX5_USBOTHER_REGS_OFFSET 0x800
-#define MXC_OTG_OFFSET 0
-#define MXC_H1_OFFSET 0x200
-#define MXC_H2_OFFSET 0x400
+#define MXC_OTG_OFFSET 0
+#define MXC_H1_OFFSET 0x200
+#define MXC_H2_OFFSET 0x400
+#define MXC_H3_OFFSET 0x600
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
#define MXC_USB_CTRL_1_OFFSET 0x10
#define MXC_USBH2CTRL_OFFSET 0x14
+#define MXC_USBH3CTRL_OFFSET 0x18
/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
+/* OTG wakeup intr enable */
+#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27)
+/* OTG power mask */
+#define MXC_OTG_UCTRL_OPM_BIT (1 << 24)
+/* OTG power pin polarity */
+#define MXC_OTG_UCTRL_O_PWR_POL_BIT (1 << 24)
+/* Host1 ULPI interrupt enable */
+#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12)
+/* HOST1 wakeup intr enable */
+#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11)
+/* HOST1 power mask */
+#define MXC_H1_UCTRL_H1PM_BIT (1 << 8)
+/* HOST1 power pin polarity */
+#define MXC_H1_UCTRL_H1_PWR_POL_BIT (1 << 8)
/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
+/* OTG Polarity of Overcurrent */
+#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9)
+/* OTG Disable Overcurrent Event */
+#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8)
+/* UH1 Polarity of Overcurrent */
+#define MXC_H1_OC_POL_BIT (1 << 6)
+/* UH1 Disable Overcurrent Event */
+#define MXC_H1_OC_DIS_BIT (1 << 5)
+/* OTG Power Pin Polarity */
+#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3)
/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
+#define MXC_H2_UCTRL_H2_OC_POL_BIT (1 << 31)
+#define MXC_H2_UCTRL_H2_OC_DIS_BIT (1 << 30)
+#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
+#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
+#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
+#define MXC_H2_UCTRL_H2_PWR_POL_BIT (1 << 4)
+
+/* USBH3CTRL */
+#define MXC_H3_UCTRL_H3_OC_POL_BIT (1 << 31)
+#define MXC_H3_UCTRL_H3_OC_DIS_BIT (1 << 30)
+#define MXC_H3_UCTRL_H3UIE_BIT (1 << 8)
+#define MXC_H3_UCTRL_H3WIE_BIT (1 << 7)
+#define MXC_H3_UCTRL_H3_PWR_POL_BIT (1 << 4)
/* USB_CTRL_1 */
-#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
+#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
int mxc_set_usbcontrol(int port, unsigned int flags)
{
if (flags & MXC_EHCI_INTERNAL_PHY) {
v = __raw_readl(usbother_base +
MXC_USB_PHY_CTR_FUNC_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
+ else
+ v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ /* OC/USBPWR is used */
+ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+ else
/* OC/USBPWR is not used */
v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+#ifdef CONFIG_MX51
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
else
- /* OC/USBPWR is used */
- v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+ v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
+#endif
__raw_writel(v, usbother_base +
MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ v &= ~MXC_OTG_UCTRL_OPM_BIT;
+ else
v |= MXC_OTG_UCTRL_OPM_BIT;
+#endif
+#ifdef CONFIG_MX53
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_OTG_UCTRL_O_PWR_POL_BIT;
else
- v &= ~MXC_OTG_UCTRL_OPM_BIT;
+ v &= ~MXC_OTG_UCTRL_O_PWR_POL_BIT;
+#endif
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
}
break;
- case 1: /* Host 1 Host ULPI */
+ case 1: /* Host 1 ULPI */
#ifdef CONFIG_MX51
/* The clock for the USBH1 ULPI port will come externally
from the PHY. */
#endif
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */
+ v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */
else
- v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */
+ v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */
+#endif
+#ifdef CONFIG_MX53
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_H1_UCTRL_H1_PWR_POL_BIT;
+ else
+ v &= ~MXC_H1_UCTRL_H1_PWR_POL_BIT;
+#endif
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_H1_OC_POL_BIT;
+ else
+ v &= ~MXC_H1_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
else
break;
case 2: /* Host 2 ULPI */
v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */
+ v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */
else
- v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */
-
+ v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */
+#endif
+#ifdef CONFIG_MX53
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_H2_UCTRL_H2_OC_POL_BIT;
+ else
+ v &= ~MXC_H2_UCTRL_H2_OC_POL_BIT;
+ if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ v &= ~MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is used */
+ else
+ v |= MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is not used */
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_H2_UCTRL_H2_PWR_POL_BIT;
+ else
+ v &= ~MXC_H2_UCTRL_H2_PWR_POL_BIT;
+#endif
__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
break;
+#ifdef CONFIG_MX53
+ case 3: /* Host 3 ULPI */
+ v = __raw_readl(usbother_base + MXC_USBH3CTRL_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_H3_UCTRL_H3_OC_POL_BIT;
+ else
+ v &= ~MXC_H3_UCTRL_H3_OC_POL_BIT;
+ if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ v &= ~MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is used */
+ else
+ v |= MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is not used */
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_H3_UCTRL_H3_PWR_POL_BIT;
+ else
+ v &= ~MXC_H3_UCTRL_H3_PWR_POL_BIT;
+ __raw_writel(v, usbother_base + MXC_USBH3CTRL_OFFSET);
+ break;
+#endif
}
return ret;
}
-int ehci_hcd_init(void)
+int __weak board_ehci_hcd_init(int port)
{
- struct usb_ehci *ehci;
-#ifdef CONFIG_MX53
- struct clkctl *sc_regs = (struct clkctl *)CCM_BASE_ADDR;
- u32 reg;
+ return 0;
+}
- reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26);
- /* derive USB PHY clock multiplexer from PLL3 */
- reg |= 1 << 26;
- __raw_writel(reg, &sc_regs->cscmr1);
-#endif
+void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
+{
+}
+
+__weak void mx5_ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg,
+ uint32_t *reg)
+{
+ mdelay(50);
+}
+
+static const struct ehci_ops mx5_ehci_ops = {
+ .powerup_fixup = mx5_ehci_powerup_fixup,
+};
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ struct usb_ehci *ehci;
+
+ /* The only user for this is efikamx-usb */
+ ehci_set_controller_priv(index, NULL, &mx5_ehci_ops);
set_usboh3_clk();
- enable_usboh3_clk(1);
- set_usb_phy2_clk();
- enable_usb_phy2_clk(1);
+ enable_usboh3_clk(true);
+ set_usb_phy_clk();
+ enable_usb_phy1_clk(true);
+ enable_usb_phy2_clk(true);
mdelay(1);
- /* do board specific initialization */
+ /* Do board specific initialization */
board_ehci_hcd_init(CONFIG_MXC_USB_PORT);
ehci = (struct usb_ehci *)(OTG_BASE_ADDR +
(0x200 * CONFIG_MXC_USB_PORT));
- hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
- hcor = (struct ehci_hcor *)((uint32_t)hccr +
- HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+ *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+ *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
setbits_le32(&ehci->usbmode, CM_HOST);
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
-
mdelay(10);
+ /* Do board specific post-initialization */
+ board_ehci_hcd_postinit(ehci, CONFIG_MXC_USB_PORT);
+
return 0;
}
-int ehci_hcd_stop(void)
+int ehci_hcd_stop(int index)
{
return 0;
}
-
-
projects / oweals / u-boot.git / blobdiff