* MA 02111-1307 USA
*/
#include <common.h>
+#include <errno.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <usb.h>
#include <asm/io.h>
#include <malloc.h>
#include <watchdog.h>
+#include <linux/compiler.h>
#include "ehci.h"
-int rootdev;
-struct ehci_hccr *hccr; /* R/O registers, not need for volatile */
-volatile struct ehci_hcor *hcor;
+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#endif
+
+/*
+ * EHCI spec page 20 says that the HC may take up to 16 uFrames (= 4ms) to halt.
+ * Let's time out after 8 to have a little safety margin on top of that.
+ */
+#define HCHALT_TIMEOUT (8 * 1000)
-static uint16_t portreset;
-static struct QH qh_list __attribute__((aligned(32)));
+static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
+
+#define ALIGN_END_ADDR(type, ptr, size) \
+ ((uint32_t)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN))
static struct descriptor {
struct usb_hub_descriptor hub;
0x29, /* bDescriptorType: hub descriptor */
2, /* bNrPorts -- runtime modified */
0, /* wHubCharacteristics */
- 0xff, /* bPwrOn2PwrGood */
+ 10, /* bPwrOn2PwrGood */
0, /* bHubCntrCurrent */
{}, /* Device removable */
{} /* at most 7 ports! XXX */
#define ehci_is_TDI() (0)
#endif
-#if defined(CONFIG_EHCI_DCACHE)
-/*
- * Routines to handle (flush/invalidate) the dcache for the QH and qTD
- * structures and data buffers. This is needed on platforms using this
- * EHCI support with dcache enabled.
- */
-static void flush_invalidate(u32 addr, int size, int flush)
+int __ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
{
- if (flush)
- flush_dcache_range(addr, addr + size);
- else
- invalidate_dcache_range(addr, addr + size);
+ return PORTSC_PSPD(reg);
}
-static void cache_qtd(struct qTD *qtd, int flush)
-{
- u32 *ptr = (u32 *)qtd->qt_buffer[0];
- int len = (qtd->qt_token & 0x7fff0000) >> 16;
-
- flush_invalidate((u32)qtd, sizeof(struct qTD), flush);
- if (ptr && len)
- flush_invalidate((u32)ptr, len, flush);
-}
-
-
-static inline struct QH *qh_addr(struct QH *qh)
-{
- return (struct QH *)((u32)qh & 0xffffffe0);
-}
+int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+ __attribute__((weak, alias("__ehci_get_port_speed")));
-static void cache_qh(struct QH *qh, int flush)
+void __ehci_set_usbmode(int index)
{
- struct qTD *qtd;
- struct qTD *next;
- static struct qTD *first_qtd;
-
- /*
- * Walk the QH list and flush/invalidate all entries
- */
- while (1) {
- flush_invalidate((u32)qh_addr(qh), sizeof(struct QH), flush);
- if ((u32)qh & QH_LINK_TYPE_QH)
- break;
- qh = qh_addr(qh);
- qh = (struct QH *)qh->qh_link;
- }
- qh = qh_addr(qh);
-
- /*
- * Save first qTD pointer, needed for invalidating pass on this QH
- */
- if (flush)
- first_qtd = qtd = (struct qTD *)(*(u32 *)&qh->qh_overlay &
- 0xffffffe0);
- else
- qtd = first_qtd;
+ uint32_t tmp;
+ uint32_t *reg_ptr;
- /*
- * Walk the qTD list and flush/invalidate all entries
- */
- while (1) {
- if (qtd == NULL)
- break;
- cache_qtd(qtd, flush);
- next = (struct qTD *)((u32)qtd->qt_next & 0xffffffe0);
- if (next == qtd)
- break;
- qtd = next;
- }
+ reg_ptr = (uint32_t *)((u8 *)&ehcic[index].hcor->or_usbcmd + USBMODE);
+ tmp = ehci_readl(reg_ptr);
+ tmp |= USBMODE_CM_HC;
+#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
+ tmp |= USBMODE_BE;
+#endif
+ ehci_writel(reg_ptr, tmp);
}
-static inline void ehci_flush_dcache(struct QH *qh)
-{
- cache_qh(qh, 1);
-}
+void ehci_set_usbmode(int index)
+ __attribute__((weak, alias("__ehci_set_usbmode")));
-static inline void ehci_invalidate_dcache(struct QH *qh)
-{
- cache_qh(qh, 0);
-}
-#else /* CONFIG_EHCI_DCACHE */
-/*
- *
- */
-static inline void ehci_flush_dcache(struct QH *qh)
+void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
{
+ mdelay(50);
}
-static inline void ehci_invalidate_dcache(struct QH *qh)
-{
-}
-#endif /* CONFIG_EHCI_DCACHE */
+void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
+ __attribute__((weak, alias("__ehci_powerup_fixup")));
static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec)
{
return -1;
}
-static void ehci_free(void *p, size_t sz)
-{
-
-}
-
-static int ehci_reset(void)
+static int ehci_reset(int index)
{
uint32_t cmd;
- uint32_t tmp;
- uint32_t *reg_ptr;
int ret = 0;
- cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
cmd = (cmd & ~CMD_RUN) | CMD_RESET;
- ehci_writel(&hcor->or_usbcmd, cmd);
- ret = handshake((uint32_t *)&hcor->or_usbcmd, CMD_RESET, 0, 250 * 1000);
+ ehci_writel(&ehcic[index].hcor->or_usbcmd, cmd);
+ ret = handshake((uint32_t *)&ehcic[index].hcor->or_usbcmd,
+ CMD_RESET, 0, 250 * 1000);
if (ret < 0) {
printf("EHCI fail to reset\n");
goto out;
}
- if (ehci_is_TDI()) {
- reg_ptr = (uint32_t *)((u8 *)hcor + USBMODE);
- tmp = ehci_readl(reg_ptr);
- tmp |= USBMODE_CM_HC;
-#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
- tmp |= USBMODE_BE;
+ if (ehci_is_TDI())
+ ehci_set_usbmode(index);
+
+#ifdef CONFIG_USB_EHCI_TXFIFO_THRESH
+ cmd = ehci_readl(&ehcic[index].hcor->or_txfilltuning);
+ cmd &= ~TXFIFO_THRESH_MASK;
+ cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH);
+ ehci_writel(&ehcic[index].hcor->or_txfilltuning, cmd);
#endif
- ehci_writel(reg_ptr, tmp);
- }
out:
return ret;
}
-static void *ehci_alloc(size_t sz, size_t align)
+static int ehci_shutdown(struct ehci_ctrl *ctrl)
{
- static struct QH qh __attribute__((aligned(32)));
- static struct qTD td[3] __attribute__((aligned (32)));
- static int ntds;
- void *p;
-
- switch (sz) {
- case sizeof(struct QH):
- p = &qh;
- ntds = 0;
- break;
- case sizeof(struct qTD):
- if (ntds == 3) {
- debug("out of TDs\n");
- return NULL;
+ int i, ret = 0;
+ uint32_t cmd, reg;
+
+ cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
+ cmd &= ~(CMD_PSE | CMD_ASE);
+ ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
+ ret = handshake(&ctrl->hcor->or_usbsts, STS_ASS | STS_PSS, 0,
+ 100 * 1000);
+
+ if (!ret) {
+ for (i = 0; i < CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS; i++) {
+ reg = ehci_readl(&ctrl->hcor->or_portsc[i]);
+ reg |= EHCI_PS_SUSP;
+ ehci_writel(&ctrl->hcor->or_portsc[i], reg);
}
- p = &td[ntds];
- ntds++;
- break;
- default:
- debug("unknown allocation size\n");
- return NULL;
+
+ cmd &= ~CMD_RUN;
+ ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
+ ret = handshake(&ctrl->hcor->or_usbsts, STS_HALT, STS_HALT,
+ HCHALT_TIMEOUT);
}
- memset(p, 0, sz);
- return p;
+ if (ret)
+ puts("EHCI failed to shut down host controller.\n");
+
+ return ret;
}
static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
{
- uint32_t addr, delta, next;
+ uint32_t delta, next;
+ uint32_t addr = (uint32_t)buf;
int idx;
- addr = (uint32_t) buf;
+ if (addr != ALIGN(addr, ARCH_DMA_MINALIGN))
+ debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf);
+
+ flush_dcache_range(addr, ALIGN(addr + sz, ARCH_DMA_MINALIGN));
+
idx = 0;
- while (idx < 5) {
+ while (idx < QT_BUFFER_CNT) {
td->qt_buffer[idx] = cpu_to_hc32(addr);
td->qt_buffer_hi[idx] = 0;
- next = (addr + 4096) & ~4095;
+ next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1);
delta = next - addr;
if (delta >= sz)
break;
idx++;
}
- if (idx == 5) {
- debug("out of buffer pointers (%u bytes left)\n", sz);
+ if (idx == QT_BUFFER_CNT) {
+ printf("out of buffer pointers (%u bytes left)\n", sz);
return -1;
}
return 0;
}
+static inline u8 ehci_encode_speed(enum usb_device_speed speed)
+{
+ #define QH_HIGH_SPEED 2
+ #define QH_FULL_SPEED 0
+ #define QH_LOW_SPEED 1
+ if (speed == USB_SPEED_HIGH)
+ return QH_HIGH_SPEED;
+ if (speed == USB_SPEED_LOW)
+ return QH_LOW_SPEED;
+ return QH_FULL_SPEED;
+}
+
static int
ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *req)
{
- struct QH *qh;
- struct qTD *td;
+ ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN);
+ struct qTD *qtd;
+ int qtd_count = 0;
+ int qtd_counter = 0;
volatile struct qTD *vtd;
unsigned long ts;
uint32_t *tdp;
- uint32_t endpt, token, usbsts;
+ uint32_t endpt, maxpacket, token, usbsts;
uint32_t c, toggle;
uint32_t cmd;
+ int timeout;
int ret = 0;
+ struct ehci_ctrl *ctrl = dev->controller;
debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe,
buffer, length, req);
le16_to_cpu(req->value), le16_to_cpu(req->value),
le16_to_cpu(req->index));
- qh = ehci_alloc(sizeof(struct QH), 32);
- if (qh == NULL) {
- debug("unable to allocate QH\n");
+#define PKT_ALIGN 512
+ /*
+ * The USB transfer is split into qTD transfers. Eeach qTD transfer is
+ * described by a transfer descriptor (the qTD). The qTDs form a linked
+ * list with a queue head (QH).
+ *
+ * Each qTD transfer starts with a new USB packet, i.e. a packet cannot
+ * have its beginning in a qTD transfer and its end in the following
+ * one, so the qTD transfer lengths have to be chosen accordingly.
+ *
+ * Each qTD transfer uses up to QT_BUFFER_CNT data buffers, mapped to
+ * single pages. The first data buffer can start at any offset within a
+ * page (not considering the cache-line alignment issues), while the
+ * following buffers must be page-aligned. There is no alignment
+ * constraint on the size of a qTD transfer.
+ */
+ if (req != NULL)
+ /* 1 qTD will be needed for SETUP, and 1 for ACK. */
+ qtd_count += 1 + 1;
+ if (length > 0 || req == NULL) {
+ /*
+ * Determine the qTD transfer size that will be used for the
+ * data payload (not considering the first qTD transfer, which
+ * may be longer or shorter, and the final one, which may be
+ * shorter).
+ *
+ * In order to keep each packet within a qTD transfer, the qTD
+ * transfer size is aligned to PKT_ALIGN, which is a multiple of
+ * wMaxPacketSize (except in some cases for interrupt transfers,
+ * see comment in submit_int_msg()).
+ *
+ * By default, i.e. if the input buffer is aligned to PKT_ALIGN,
+ * QT_BUFFER_CNT full pages will be used.
+ */
+ int xfr_sz = QT_BUFFER_CNT;
+ /*
+ * However, if the input buffer is not aligned to PKT_ALIGN, the
+ * qTD transfer size will be one page shorter, and the first qTD
+ * data buffer of each transfer will be page-unaligned.
+ */
+ if ((uint32_t)buffer & (PKT_ALIGN - 1))
+ xfr_sz--;
+ /* Convert the qTD transfer size to bytes. */
+ xfr_sz *= EHCI_PAGE_SIZE;
+ /*
+ * Approximate by excess the number of qTDs that will be
+ * required for the data payload. The exact formula is way more
+ * complicated and saves at most 2 qTDs, i.e. a total of 128
+ * bytes.
+ */
+ qtd_count += 2 + length / xfr_sz;
+ }
+/*
+ * Threshold value based on the worst-case total size of the allocated qTDs for
+ * a mass-storage transfer of 65535 blocks of 512 bytes.
+ */
+#if CONFIG_SYS_MALLOC_LEN <= 64 + 128 * 1024
+#warning CONFIG_SYS_MALLOC_LEN may be too small for EHCI
+#endif
+ qtd = memalign(USB_DMA_MINALIGN, qtd_count * sizeof(struct qTD));
+ if (qtd == NULL) {
+ printf("unable to allocate TDs\n");
return -1;
}
- qh->qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
- c = (usb_pipespeed(pipe) != USB_SPEED_HIGH &&
- usb_pipeendpoint(pipe) == 0) ? 1 : 0;
- endpt = (8 << 28) |
- (c << 27) |
- (usb_maxpacket(dev, pipe) << 16) |
- (0 << 15) |
- (1 << 14) |
- (usb_pipespeed(pipe) << 12) |
- (usb_pipeendpoint(pipe) << 8) |
- (0 << 7) | (usb_pipedevice(pipe) << 0);
+
+ memset(qh, 0, sizeof(struct QH));
+ memset(qtd, 0, qtd_count * sizeof(*qtd));
+
+ toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+
+ /*
+ * Setup QH (3.6 in ehci-r10.pdf)
+ *
+ * qh_link ................. 03-00 H
+ * qh_endpt1 ............... 07-04 H
+ * qh_endpt2 ............... 0B-08 H
+ * - qh_curtd
+ * qh_overlay.qt_next ...... 13-10 H
+ * - qh_overlay.qt_altnext
+ */
+ qh->qh_link = cpu_to_hc32((uint32_t)&ctrl->qh_list | QH_LINK_TYPE_QH);
+ c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe);
+ maxpacket = usb_maxpacket(dev, pipe);
+ endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) |
+ QH_ENDPT1_MAXPKTLEN(maxpacket) | QH_ENDPT1_H(0) |
+ QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) |
+ QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) |
+ QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) |
+ QH_ENDPT1_DEVADDR(usb_pipedevice(pipe));
qh->qh_endpt1 = cpu_to_hc32(endpt);
- endpt = (1 << 30) |
- (dev->portnr << 23) |
- (dev->parent->devnum << 16) | (0 << 8) | (0 << 0);
+ endpt = QH_ENDPT2_MULT(1) | QH_ENDPT2_PORTNUM(dev->portnr) |
+ QH_ENDPT2_HUBADDR(dev->parent->devnum) |
+ QH_ENDPT2_UFCMASK(0) | QH_ENDPT2_UFSMASK(0);
qh->qh_endpt2 = cpu_to_hc32(endpt);
qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
- td = NULL;
tdp = &qh->qh_overlay.qt_next;
- toggle =
- usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
-
if (req != NULL) {
- td = ehci_alloc(sizeof(struct qTD), 32);
- if (td == NULL) {
- debug("unable to allocate SETUP td\n");
+ /*
+ * Setup request qTD (3.5 in ehci-r10.pdf)
+ *
+ * qt_next ................ 03-00 H
+ * qt_altnext ............. 07-04 H
+ * qt_token ............... 0B-08 H
+ *
+ * [ buffer, buffer_hi ] loaded with "req".
+ */
+ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+ qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+ token = QT_TOKEN_DT(0) | QT_TOKEN_TOTALBYTES(sizeof(*req)) |
+ QT_TOKEN_IOC(0) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) |
+ QT_TOKEN_PID(QT_TOKEN_PID_SETUP) |
+ QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
+ qtd[qtd_counter].qt_token = cpu_to_hc32(token);
+ if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req))) {
+ printf("unable to construct SETUP TD\n");
goto fail;
}
- td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
- td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- token = (0 << 31) |
- (sizeof(*req) << 16) |
- (0 << 15) | (0 << 12) | (3 << 10) | (2 << 8) | (0x80 << 0);
- td->qt_token = cpu_to_hc32(token);
- if (ehci_td_buffer(td, req, sizeof(*req)) != 0) {
- debug("unable construct SETUP td\n");
- ehci_free(td, sizeof(*td));
- goto fail;
- }
- *tdp = cpu_to_hc32((uint32_t) td);
- tdp = &td->qt_next;
+ /* Update previous qTD! */
+ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
+ tdp = &qtd[qtd_counter++].qt_next;
toggle = 1;
}
if (length > 0 || req == NULL) {
- td = ehci_alloc(sizeof(struct qTD), 32);
- if (td == NULL) {
- debug("unable to allocate DATA td\n");
- goto fail;
- }
- td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
- td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- token = (toggle << 31) |
- (length << 16) |
- ((req == NULL ? 1 : 0) << 15) |
- (0 << 12) |
- (3 << 10) |
- ((usb_pipein(pipe) ? 1 : 0) << 8) | (0x80 << 0);
- td->qt_token = cpu_to_hc32(token);
- if (ehci_td_buffer(td, buffer, length) != 0) {
- debug("unable construct DATA td\n");
- ehci_free(td, sizeof(*td));
- goto fail;
- }
- *tdp = cpu_to_hc32((uint32_t) td);
- tdp = &td->qt_next;
+ uint8_t *buf_ptr = buffer;
+ int left_length = length;
+
+ do {
+ /*
+ * Determine the size of this qTD transfer. By default,
+ * QT_BUFFER_CNT full pages can be used.
+ */
+ int xfr_bytes = QT_BUFFER_CNT * EHCI_PAGE_SIZE;
+ /*
+ * However, if the input buffer is not page-aligned, the
+ * portion of the first page before the buffer start
+ * offset within that page is unusable.
+ */
+ xfr_bytes -= (uint32_t)buf_ptr & (EHCI_PAGE_SIZE - 1);
+ /*
+ * In order to keep each packet within a qTD transfer,
+ * align the qTD transfer size to PKT_ALIGN.
+ */
+ xfr_bytes &= ~(PKT_ALIGN - 1);
+ /*
+ * This transfer may be shorter than the available qTD
+ * transfer size that has just been computed.
+ */
+ xfr_bytes = min(xfr_bytes, left_length);
+
+ /*
+ * Setup request qTD (3.5 in ehci-r10.pdf)
+ *
+ * qt_next ................ 03-00 H
+ * qt_altnext ............. 07-04 H
+ * qt_token ............... 0B-08 H
+ *
+ * [ buffer, buffer_hi ] loaded with "buffer".
+ */
+ qtd[qtd_counter].qt_next =
+ cpu_to_hc32(QT_NEXT_TERMINATE);
+ qtd[qtd_counter].qt_altnext =
+ cpu_to_hc32(QT_NEXT_TERMINATE);
+ token = QT_TOKEN_DT(toggle) |
+ QT_TOKEN_TOTALBYTES(xfr_bytes) |
+ QT_TOKEN_IOC(req == NULL) | QT_TOKEN_CPAGE(0) |
+ QT_TOKEN_CERR(3) |
+ QT_TOKEN_PID(usb_pipein(pipe) ?
+ QT_TOKEN_PID_IN : QT_TOKEN_PID_OUT) |
+ QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
+ qtd[qtd_counter].qt_token = cpu_to_hc32(token);
+ if (ehci_td_buffer(&qtd[qtd_counter], buf_ptr,
+ xfr_bytes)) {
+ printf("unable to construct DATA TD\n");
+ goto fail;
+ }
+ /* Update previous qTD! */
+ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
+ tdp = &qtd[qtd_counter++].qt_next;
+ /*
+ * Data toggle has to be adjusted since the qTD transfer
+ * size is not always an even multiple of
+ * wMaxPacketSize.
+ */
+ if ((xfr_bytes / maxpacket) & 1)
+ toggle ^= 1;
+ buf_ptr += xfr_bytes;
+ left_length -= xfr_bytes;
+ } while (left_length > 0);
}
if (req != NULL) {
- td = ehci_alloc(sizeof(struct qTD), 32);
- if (td == NULL) {
- debug("unable to allocate ACK td\n");
- goto fail;
- }
- td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
- td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- token = (toggle << 31) |
- (0 << 16) |
- (1 << 15) |
- (0 << 12) |
- (3 << 10) |
- ((usb_pipein(pipe) ? 0 : 1) << 8) | (0x80 << 0);
- td->qt_token = cpu_to_hc32(token);
- *tdp = cpu_to_hc32((uint32_t) td);
- tdp = &td->qt_next;
+ /*
+ * Setup request qTD (3.5 in ehci-r10.pdf)
+ *
+ * qt_next ................ 03-00 H
+ * qt_altnext ............. 07-04 H
+ * qt_token ............... 0B-08 H
+ */
+ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+ qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+ token = QT_TOKEN_DT(1) | QT_TOKEN_TOTALBYTES(0) |
+ QT_TOKEN_IOC(1) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) |
+ QT_TOKEN_PID(usb_pipein(pipe) ?
+ QT_TOKEN_PID_OUT : QT_TOKEN_PID_IN) |
+ QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
+ qtd[qtd_counter].qt_token = cpu_to_hc32(token);
+ /* Update previous qTD! */
+ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
+ tdp = &qtd[qtd_counter++].qt_next;
}
- qh_list.qh_link = cpu_to_hc32((uint32_t) qh | QH_LINK_TYPE_QH);
+ ctrl->qh_list.qh_link = cpu_to_hc32((uint32_t)qh | QH_LINK_TYPE_QH);
/* Flush dcache */
- ehci_flush_dcache(&qh_list);
+ flush_dcache_range((uint32_t)&ctrl->qh_list,
+ ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1));
+ flush_dcache_range((uint32_t)qh, ALIGN_END_ADDR(struct QH, qh, 1));
+ flush_dcache_range((uint32_t)qtd,
+ ALIGN_END_ADDR(struct qTD, qtd, qtd_count));
+
+ /* Set async. queue head pointer. */
+ ehci_writel(&ctrl->hcor->or_asynclistaddr, (uint32_t)&ctrl->qh_list);
- usbsts = ehci_readl(&hcor->or_usbsts);
- ehci_writel(&hcor->or_usbsts, (usbsts & 0x3f));
+ usbsts = ehci_readl(&ctrl->hcor->or_usbsts);
+ ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f));
/* Enable async. schedule. */
- cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
cmd |= CMD_ASE;
- ehci_writel(&hcor->or_usbcmd, cmd);
+ ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
- ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, STD_ASS,
+ ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, STS_ASS,
100 * 1000);
if (ret < 0) {
- printf("EHCI fail timeout STD_ASS set\n");
+ printf("EHCI fail timeout STS_ASS set\n");
goto fail;
}
/* Wait for TDs to be processed. */
ts = get_timer(0);
- vtd = td;
+ vtd = &qtd[qtd_counter - 1];
+ timeout = USB_TIMEOUT_MS(pipe);
do {
/* Invalidate dcache */
- ehci_invalidate_dcache(&qh_list);
+ invalidate_dcache_range((uint32_t)&ctrl->qh_list,
+ ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1));
+ invalidate_dcache_range((uint32_t)qh,
+ ALIGN_END_ADDR(struct QH, qh, 1));
+ invalidate_dcache_range((uint32_t)qtd,
+ ALIGN_END_ADDR(struct qTD, qtd, qtd_count));
+
token = hc32_to_cpu(vtd->qt_token);
- if (!(token & 0x80))
+ if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE))
break;
WATCHDOG_RESET();
- } while (get_timer(ts) < CONFIG_SYS_HZ);
+ } while (get_timer(ts) < timeout);
+
+ /*
+ * Invalidate the memory area occupied by buffer
+ * Don't try to fix the buffer alignment, if it isn't properly
+ * aligned it's upper layer's fault so let invalidate_dcache_range()
+ * vow about it. But we have to fix the length as it's actual
+ * transfer length and can be unaligned. This is potentially
+ * dangerous operation, it's responsibility of the calling
+ * code to make sure enough space is reserved.
+ */
+ invalidate_dcache_range((uint32_t)buffer,
+ ALIGN((uint32_t)buffer + length, ARCH_DMA_MINALIGN));
+
+ /* Check that the TD processing happened */
+ if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)
+ printf("EHCI timed out on TD - token=%#x\n", token);
/* Disable async schedule. */
- cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
cmd &= ~CMD_ASE;
- ehci_writel(&hcor->or_usbcmd, cmd);
+ ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
- ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, 0,
+ ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, 0,
100 * 1000);
if (ret < 0) {
- printf("EHCI fail timeout STD_ASS reset\n");
+ printf("EHCI fail timeout STS_ASS reset\n");
goto fail;
}
- qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
-
token = hc32_to_cpu(qh->qh_overlay.qt_token);
- if (!(token & 0x80)) {
+ if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) {
debug("TOKEN=%#x\n", token);
- switch (token & 0xfc) {
+ switch (QT_TOKEN_GET_STATUS(token) &
+ ~(QT_TOKEN_STATUS_SPLITXSTATE | QT_TOKEN_STATUS_PERR)) {
case 0:
- toggle = token >> 31;
+ toggle = QT_TOKEN_GET_DT(token);
usb_settoggle(dev, usb_pipeendpoint(pipe),
usb_pipeout(pipe), toggle);
dev->status = 0;
break;
- case 0x40:
+ case QT_TOKEN_STATUS_HALTED:
dev->status = USB_ST_STALLED;
break;
- case 0xa0:
- case 0x20:
+ case QT_TOKEN_STATUS_ACTIVE | QT_TOKEN_STATUS_DATBUFERR:
+ case QT_TOKEN_STATUS_DATBUFERR:
dev->status = USB_ST_BUF_ERR;
break;
- case 0x50:
- case 0x10:
+ case QT_TOKEN_STATUS_HALTED | QT_TOKEN_STATUS_BABBLEDET:
+ case QT_TOKEN_STATUS_BABBLEDET:
dev->status = USB_ST_BABBLE_DET;
break;
default:
dev->status = USB_ST_CRC_ERR;
- if ((token & 0x40) == 0x40)
+ if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_HALTED)
dev->status |= USB_ST_STALLED;
break;
}
- dev->act_len = length - ((token >> 16) & 0x7fff);
+ dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token);
} else {
dev->act_len = 0;
+#ifndef CONFIG_USB_EHCI_FARADAY
debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
- dev->devnum, ehci_readl(&hcor->or_usbsts),
- ehci_readl(&hcor->or_portsc[0]),
- ehci_readl(&hcor->or_portsc[1]));
+ dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
+ ehci_readl(&ctrl->hcor->or_portsc[0]),
+ ehci_readl(&ctrl->hcor->or_portsc[1]));
+#endif
}
+ free(qtd);
return (dev->status != USB_ST_NOT_PROC) ? 0 : -1;
fail:
- td = (void *)hc32_to_cpu(qh->qh_overlay.qt_next);
- while (td != (void *)QT_NEXT_TERMINATE) {
- qh->qh_overlay.qt_next = td->qt_next;
- ehci_free(td, sizeof(*td));
- td = (void *)hc32_to_cpu(qh->qh_overlay.qt_next);
- }
- ehci_free(qh, sizeof(*qh));
+ free(qtd);
return -1;
}
-static inline int min3(int a, int b, int c)
+__weak uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
{
+ if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+ /* Printing the message would cause a scan failure! */
+ debug("The request port(%u) is not configured\n", port);
+ return NULL;
+ }
- if (b < a)
- a = b;
- if (c < a)
- a = c;
- return a;
+ return (uint32_t *)&hcor->or_portsc[port];
}
int
int len, srclen;
uint32_t reg;
uint32_t *status_reg;
+ int port = le16_to_cpu(req->index) & 0xff;
+ struct ehci_ctrl *ctrl = dev->controller;
- if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
- printf("The request port(%d) is not configured\n",
- le16_to_cpu(req->index) - 1);
- return -1;
- }
- status_reg = (uint32_t *)&hcor->or_portsc[
- le16_to_cpu(req->index) - 1];
srclen = 0;
debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
typeReq = req->request | req->requesttype << 8;
+ switch (typeReq) {
+ case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
+ case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
+ case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
+ status_reg = ehci_get_portsc_register(ctrl->hcor, port - 1);
+ if (!status_reg)
+ return -1;
+ break;
+ default:
+ status_reg = NULL;
+ break;
+ }
+
switch (typeReq) {
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch (le16_to_cpu(req->value) >> 8) {
case USB_DT_DEVICE:
debug("USB_DT_DEVICE request\n");
srcptr = &descriptor.device;
- srclen = 0x12;
+ srclen = descriptor.device.bLength;
break;
case USB_DT_CONFIG:
debug("USB_DT_CONFIG config\n");
srcptr = &descriptor.config;
- srclen = 0x19;
+ srclen = descriptor.config.bLength +
+ descriptor.interface.bLength +
+ descriptor.endpoint.bLength;
break;
case USB_DT_STRING:
debug("USB_DT_STRING config\n");
case USB_DT_HUB:
debug("USB_DT_HUB config\n");
srcptr = &descriptor.hub;
- srclen = 0x8;
+ srclen = descriptor.hub.bLength;
break;
default:
debug("unknown value %x\n", le16_to_cpu(req->value));
break;
case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8):
debug("USB_REQ_SET_ADDRESS\n");
- rootdev = le16_to_cpu(req->value);
+ ctrl->rootdev = le16_to_cpu(req->value);
break;
case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
debug("USB_REQ_SET_CONFIGURATION\n");
tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
if (ehci_is_TDI()) {
- switch ((reg >> 26) & 3) {
- case 0:
+ switch (ehci_get_port_speed(ctrl->hcor, reg)) {
+ case PORTSC_PSPD_FS:
break;
- case 1:
+ case PORTSC_PSPD_LS:
tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
break;
- case 2:
+ case PORTSC_PSPD_HS:
default:
tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
break;
tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
if (reg & EHCI_PS_OCC)
tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
- if (portreset & (1 << le16_to_cpu(req->index)))
+ if (ctrl->portreset & (1 << port))
tmpbuf[2] |= USB_PORT_STAT_C_RESET;
srcptr = tmpbuf;
ehci_writel(status_reg, reg);
break;
case USB_PORT_FEAT_POWER:
- if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams))) {
+ if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) {
reg |= EHCI_PS_PP;
ehci_writel(status_reg, reg);
}
EHCI_PS_IS_LOWSPEED(reg)) {
/* Low speed device, give up ownership. */
debug("port %d low speed --> companion\n",
- req->index - 1);
+ port - 1);
reg |= EHCI_PS_PO;
ehci_writel(status_reg, reg);
break;
* usb 2.0 specification say 50 ms resets on
* root
*/
- wait_ms(50);
- /* terminate the reset */
+ ehci_powerup_fixup(status_reg, ®);
+
ehci_writel(status_reg, reg & ~EHCI_PS_PR);
/*
* A host controller must terminate the reset
ret = handshake(status_reg, EHCI_PS_PR, 0,
2 * 1000);
if (!ret)
- portreset |=
- 1 << le16_to_cpu(req->index);
+ ctrl->portreset |= 1 << port;
else
printf("port(%d) reset error\n",
- le16_to_cpu(req->index) - 1);
+ port - 1);
}
break;
+ case USB_PORT_FEAT_TEST:
+ ehci_shutdown(ctrl);
+ reg &= ~(0xf << 16);
+ reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16;
+ ehci_writel(status_reg, reg);
+ break;
default:
debug("unknown feature %x\n", le16_to_cpu(req->value));
goto unknown;
}
/* unblock posted writes */
- (void) ehci_readl(&hcor->or_usbcmd);
+ (void) ehci_readl(&ctrl->hcor->or_usbcmd);
break;
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(status_reg);
+ reg &= ~EHCI_PS_CLEAR;
switch (le16_to_cpu(req->value)) {
case USB_PORT_FEAT_ENABLE:
reg &= ~EHCI_PS_PE;
break;
case USB_PORT_FEAT_C_ENABLE:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
+ reg |= EHCI_PS_PE;
break;
case USB_PORT_FEAT_POWER:
- if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams)))
- reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
+ if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams)))
+ reg &= ~EHCI_PS_PP;
+ break;
case USB_PORT_FEAT_C_CONNECTION:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
+ reg |= EHCI_PS_CSC;
break;
case USB_PORT_FEAT_OVER_CURRENT:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
+ reg |= EHCI_PS_OCC;
break;
case USB_PORT_FEAT_C_RESET:
- portreset &= ~(1 << le16_to_cpu(req->index));
+ ctrl->portreset &= ~(1 << port);
break;
default:
debug("unknown feature %x\n", le16_to_cpu(req->value));
}
ehci_writel(status_reg, reg);
/* unblock posted write */
- (void) ehci_readl(&hcor->or_usbcmd);
+ (void) ehci_readl(&ctrl->hcor->or_usbcmd);
break;
default:
debug("Unknown request\n");
goto unknown;
}
- wait_ms(1);
+ mdelay(1);
len = min3(srclen, le16_to_cpu(req->length), length);
if (srcptr != NULL && len > 0)
memcpy(buffer, srcptr, len);
return -1;
}
-int usb_lowlevel_stop(void)
+int usb_lowlevel_stop(int index)
{
- return ehci_hcd_stop();
+ ehci_shutdown(&ehcic[index]);
+ return ehci_hcd_stop(index);
}
-int usb_lowlevel_init(void)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
uint32_t reg;
uint32_t cmd;
+ struct QH *qh_list;
+ struct QH *periodic;
+ int i;
+ int rc;
- if (ehci_hcd_init() != 0)
- return -1;
+ rc = ehci_hcd_init(index, init, &ehcic[index].hccr, &ehcic[index].hcor);
+ if (rc)
+ return rc;
+ if (init == USB_INIT_DEVICE)
+ goto done;
/* EHCI spec section 4.1 */
- if (ehci_reset() != 0)
+ if (ehci_reset(index))
return -1;
#if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET)
- if (ehci_hcd_init() != 0)
- return -1;
+ rc = ehci_hcd_init(index, init, &ehcic[index].hccr, &ehcic[index].hcor);
+ if (rc)
+ return rc;
#endif
+ /* Set the high address word (aka segment) for 64-bit controller */
+ if (ehci_readl(&ehcic[index].hccr->cr_hccparams) & 1)
+ ehci_writel(ehcic[index].hcor->or_ctrldssegment, 0);
+
+ qh_list = &ehcic[index].qh_list;
/* Set head of reclaim list */
- memset(&qh_list, 0, sizeof(qh_list));
- qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
- qh_list.qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12));
- qh_list.qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE);
- qh_list.qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
- qh_list.qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- qh_list.qh_overlay.qt_token = cpu_to_hc32(0x40);
+ memset(qh_list, 0, sizeof(*qh_list));
+ qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH);
+ qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
+ QH_ENDPT1_EPS(USB_SPEED_HIGH));
+ qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE);
+ qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+ qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+ qh_list->qh_overlay.qt_token =
+ cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
+
+ flush_dcache_range((uint32_t)qh_list,
+ ALIGN_END_ADDR(struct QH, qh_list, 1));
/* Set async. queue head pointer. */
- ehci_writel(&hcor->or_asynclistaddr, (uint32_t)&qh_list);
+ ehci_writel(&ehcic[index].hcor->or_asynclistaddr, (uint32_t)qh_list);
+
+ /*
+ * Set up periodic list
+ * Step 1: Parent QH for all periodic transfers.
+ */
+ periodic = &ehcic[index].periodic_queue;
+ memset(periodic, 0, sizeof(*periodic));
+ periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
+ periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+ periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+
+ flush_dcache_range((uint32_t)periodic,
+ ALIGN_END_ADDR(struct QH, periodic, 1));
+
+ /*
+ * Step 2: Setup frame-list: Every microframe, USB tries the same list.
+ * In particular, device specifications on polling frequency
+ * are disregarded. Keyboards seem to send NAK/NYet reliably
+ * when polled with an empty buffer.
+ *
+ * Split Transactions will be spread across microframes using
+ * S-mask and C-mask.
+ */
+ if (ehcic[index].periodic_list == NULL)
+ ehcic[index].periodic_list = memalign(4096, 1024 * 4);
+
+ if (!ehcic[index].periodic_list)
+ return -ENOMEM;
+ for (i = 0; i < 1024; i++) {
+ ehcic[index].periodic_list[i] = (uint32_t)periodic
+ | QH_LINK_TYPE_QH;
+ }
+
+ flush_dcache_range((uint32_t)ehcic[index].periodic_list,
+ ALIGN_END_ADDR(uint32_t, ehcic[index].periodic_list,
+ 1024));
- reg = ehci_readl(&hccr->cr_hcsparams);
+ /* Set periodic list base address */
+ ehci_writel(&ehcic[index].hcor->or_periodiclistbase,
+ (uint32_t)ehcic[index].periodic_list);
+
+ reg = ehci_readl(&ehcic[index].hccr->cr_hcsparams);
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
- printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
+ debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
/* Port Indicators */
if (HCS_INDICATOR(reg))
- descriptor.hub.wHubCharacteristics |= 0x80;
+ put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
+ | 0x80, &descriptor.hub.wHubCharacteristics);
/* Port Power Control */
if (HCS_PPC(reg))
- descriptor.hub.wHubCharacteristics |= 0x01;
+ put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
+ | 0x01, &descriptor.hub.wHubCharacteristics);
/* Start the host controller. */
- cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
/*
* Philips, Intel, and maybe others need CMD_RUN before the
* root hub will detect new devices (why?); NEC doesn't
*/
cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
cmd |= CMD_RUN;
- ehci_writel(&hcor->or_usbcmd, cmd);
+ ehci_writel(&ehcic[index].hcor->or_usbcmd, cmd);
+#ifndef CONFIG_USB_EHCI_FARADAY
/* take control over the ports */
- cmd = ehci_readl(&hcor->or_configflag);
+ cmd = ehci_readl(&ehcic[index].hcor->or_configflag);
cmd |= FLAG_CF;
- ehci_writel(&hcor->or_configflag, cmd);
+ ehci_writel(&ehcic[index].hcor->or_configflag, cmd);
+#endif
+
/* unblock posted write */
- cmd = ehci_readl(&hcor->or_usbcmd);
- wait_ms(5);
- reg = HC_VERSION(ehci_readl(&hccr->cr_capbase));
+ cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
+ mdelay(5);
+ reg = HC_VERSION(ehci_readl(&ehcic[index].hccr->cr_capbase));
printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff);
- rootdev = 0;
-
+ ehcic[index].rootdev = 0;
+done:
+ *controller = &ehcic[index];
return 0;
}
submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *setup)
{
+ struct ehci_ctrl *ctrl = dev->controller;
if (usb_pipetype(pipe) != PIPE_CONTROL) {
debug("non-control pipe (type=%lu)", usb_pipetype(pipe));
return -1;
}
- if (usb_pipedevice(pipe) == rootdev) {
- if (rootdev == 0)
+ if (usb_pipedevice(pipe) == ctrl->rootdev) {
+ if (!ctrl->rootdev)
dev->speed = USB_SPEED_HIGH;
return ehci_submit_root(dev, pipe, buffer, length, setup);
}
return ehci_submit_async(dev, pipe, buffer, length, setup);
}
+struct int_queue {
+ struct QH *first;
+ struct QH *current;
+ struct QH *last;
+ struct qTD *tds;
+};
+
+#define NEXT_QH(qh) (struct QH *)((qh)->qh_link & ~0x1f)
+
+static int
+enable_periodic(struct ehci_ctrl *ctrl)
+{
+ uint32_t cmd;
+ struct ehci_hcor *hcor = ctrl->hcor;
+ int ret;
+
+ cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd |= CMD_PSE;
+ ehci_writel(&hcor->or_usbcmd, cmd);
+
+ ret = handshake((uint32_t *)&hcor->or_usbsts,
+ STS_PSS, STS_PSS, 100 * 1000);
+ if (ret < 0) {
+ printf("EHCI failed: timeout when enabling periodic list\n");
+ return -ETIMEDOUT;
+ }
+ udelay(1000);
+ return 0;
+}
+
+static int
+disable_periodic(struct ehci_ctrl *ctrl)
+{
+ uint32_t cmd;
+ struct ehci_hcor *hcor = ctrl->hcor;
+ int ret;
+
+ cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd &= ~CMD_PSE;
+ ehci_writel(&hcor->or_usbcmd, cmd);
+
+ ret = handshake((uint32_t *)&hcor->or_usbsts,
+ STS_PSS, 0, 100 * 1000);
+ if (ret < 0) {
+ printf("EHCI failed: timeout when disabling periodic list\n");
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int periodic_schedules;
+
+struct int_queue *
+create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize,
+ int elementsize, void *buffer)
+{
+ struct ehci_ctrl *ctrl = dev->controller;
+ struct int_queue *result = NULL;
+ int i;
+
+ debug("Enter create_int_queue\n");
+ if (usb_pipetype(pipe) != PIPE_INTERRUPT) {
+ debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe));
+ return NULL;
+ }
+
+ /* limit to 4 full pages worth of data -
+ * we can safely fit them in a single TD,
+ * no matter the alignment
+ */
+ if (elementsize >= 16384) {
+ debug("too large elements for interrupt transfers\n");
+ return NULL;
+ }
+
+ result = malloc(sizeof(*result));
+ if (!result) {
+ debug("ehci intr queue: out of memory\n");
+ goto fail1;
+ }
+ result->first = memalign(32, sizeof(struct QH) * queuesize);
+ if (!result->first) {
+ debug("ehci intr queue: out of memory\n");
+ goto fail2;
+ }
+ result->current = result->first;
+ result->last = result->first + queuesize - 1;
+ result->tds = memalign(32, sizeof(struct qTD) * queuesize);
+ if (!result->tds) {
+ debug("ehci intr queue: out of memory\n");
+ goto fail3;
+ }
+ memset(result->first, 0, sizeof(struct QH) * queuesize);
+ memset(result->tds, 0, sizeof(struct qTD) * queuesize);
+
+ for (i = 0; i < queuesize; i++) {
+ struct QH *qh = result->first + i;
+ struct qTD *td = result->tds + i;
+ void **buf = &qh->buffer;
+
+ qh->qh_link = (uint32_t)(qh+1) | QH_LINK_TYPE_QH;
+ if (i == queuesize - 1)
+ qh->qh_link = QH_LINK_TERMINATE;
+
+ qh->qh_overlay.qt_next = (uint32_t)td;
+ qh->qh_endpt1 = (0 << 28) | /* No NAK reload (ehci 4.9) */
+ (usb_maxpacket(dev, pipe) << 16) | /* MPS */
+ (1 << 14) |
+ QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) |
+ (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */
+ (usb_pipedevice(pipe) << 0);
+ qh->qh_endpt2 = (1 << 30) | /* 1 Tx per mframe */
+ (1 << 0); /* S-mask: microframe 0 */
+ if (dev->speed == USB_SPEED_LOW ||
+ dev->speed == USB_SPEED_FULL) {
+ debug("TT: port: %d, hub address: %d\n",
+ dev->portnr, dev->parent->devnum);
+ qh->qh_endpt2 |= (dev->portnr << 23) |
+ (dev->parent->devnum << 16) |
+ (0x1c << 8); /* C-mask: microframes 2-4 */
+ }
+
+ td->qt_next = QT_NEXT_TERMINATE;
+ td->qt_altnext = QT_NEXT_TERMINATE;
+ debug("communication direction is '%s'\n",
+ usb_pipein(pipe) ? "in" : "out");
+ td->qt_token = (elementsize << 16) |
+ ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */
+ 0x80; /* active */
+ td->qt_buffer[0] = (uint32_t)buffer + i * elementsize;
+ td->qt_buffer[1] = (td->qt_buffer[0] + 0x1000) & ~0xfff;
+ td->qt_buffer[2] = (td->qt_buffer[0] + 0x2000) & ~0xfff;
+ td->qt_buffer[3] = (td->qt_buffer[0] + 0x3000) & ~0xfff;
+ td->qt_buffer[4] = (td->qt_buffer[0] + 0x4000) & ~0xfff;
+
+ *buf = buffer + i * elementsize;
+ }
+
+ flush_dcache_range((uint32_t)buffer,
+ ALIGN_END_ADDR(char, buffer,
+ queuesize * elementsize));
+ flush_dcache_range((uint32_t)result->first,
+ ALIGN_END_ADDR(struct QH, result->first,
+ queuesize));
+ flush_dcache_range((uint32_t)result->tds,
+ ALIGN_END_ADDR(struct qTD, result->tds,
+ queuesize));
+
+ if (disable_periodic(ctrl) < 0) {
+ debug("FATAL: periodic should never fail, but did");
+ goto fail3;
+ }
+
+ /* hook up to periodic list */
+ struct QH *list = &ctrl->periodic_queue;
+ result->last->qh_link = list->qh_link;
+ list->qh_link = (uint32_t)result->first | QH_LINK_TYPE_QH;
+
+ flush_dcache_range((uint32_t)result->last,
+ ALIGN_END_ADDR(struct QH, result->last, 1));
+ flush_dcache_range((uint32_t)list,
+ ALIGN_END_ADDR(struct QH, list, 1));
+
+ if (enable_periodic(ctrl) < 0) {
+ debug("FATAL: periodic should never fail, but did");
+ goto fail3;
+ }
+ periodic_schedules++;
+
+ debug("Exit create_int_queue\n");
+ return result;
+fail3:
+ if (result->tds)
+ free(result->tds);
+fail2:
+ if (result->first)
+ free(result->first);
+ if (result)
+ free(result);
+fail1:
+ return NULL;
+}
+
+void *poll_int_queue(struct usb_device *dev, struct int_queue *queue)
+{
+ struct QH *cur = queue->current;
+
+ /* depleted queue */
+ if (cur == NULL) {
+ debug("Exit poll_int_queue with completed queue\n");
+ return NULL;
+ }
+ /* still active */
+ invalidate_dcache_range((uint32_t)cur,
+ ALIGN_END_ADDR(struct QH, cur, 1));
+ if (cur->qh_overlay.qt_token & 0x80) {
+ debug("Exit poll_int_queue with no completed intr transfer. "
+ "token is %x\n", cur->qh_overlay.qt_token);
+ return NULL;
+ }
+ if (!(cur->qh_link & QH_LINK_TERMINATE))
+ queue->current++;
+ else
+ queue->current = NULL;
+ debug("Exit poll_int_queue with completed intr transfer. "
+ "token is %x at %p (first at %p)\n", cur->qh_overlay.qt_token,
+ &cur->qh_overlay.qt_token, queue->first);
+ return cur->buffer;
+}
+
+/* Do not free buffers associated with QHs, they're owned by someone else */
+int
+destroy_int_queue(struct usb_device *dev, struct int_queue *queue)
+{
+ struct ehci_ctrl *ctrl = dev->controller;
+ int result = -1;
+ unsigned long timeout;
+
+ if (disable_periodic(ctrl) < 0) {
+ debug("FATAL: periodic should never fail, but did");
+ goto out;
+ }
+ periodic_schedules--;
+
+ struct QH *cur = &ctrl->periodic_queue;
+ timeout = get_timer(0) + 500; /* abort after 500ms */
+ while (!(cur->qh_link & QH_LINK_TERMINATE)) {
+ debug("considering %p, with qh_link %x\n", cur, cur->qh_link);
+ if (NEXT_QH(cur) == queue->first) {
+ debug("found candidate. removing from chain\n");
+ cur->qh_link = queue->last->qh_link;
+ result = 0;
+ break;
+ }
+ cur = NEXT_QH(cur);
+ if (get_timer(0) > timeout) {
+ printf("Timeout destroying interrupt endpoint queue\n");
+ result = -1;
+ goto out;
+ }
+ }
+
+ if (periodic_schedules > 0) {
+ result = enable_periodic(ctrl);
+ if (result < 0)
+ debug("FATAL: periodic should never fail, but did");
+ }
+
+out:
+ free(queue->tds);
+ free(queue->first);
+ free(queue);
+
+ return result;
+}
+
int
submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, int interval)
{
+ void *backbuffer;
+ struct int_queue *queue;
+ unsigned long timeout;
+ int result = 0, ret;
debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d",
dev, pipe, buffer, length, interval);
- return -1;
+
+ /*
+ * Interrupt transfers requiring several transactions are not supported
+ * because bInterval is ignored.
+ *
+ * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2
+ * <= PKT_ALIGN if several qTDs are required, while the USB
+ * specification does not constrain this for interrupt transfers. That
+ * means that ehci_submit_async() would support interrupt transfers
+ * requiring several transactions only as long as the transfer size does
+ * not require more than a single qTD.
+ */
+ if (length > usb_maxpacket(dev, pipe)) {
+ printf("%s: Interrupt transfers requiring several "
+ "transactions are not supported.\n", __func__);
+ return -1;
+ }
+
+ queue = create_int_queue(dev, pipe, 1, length, buffer);
+
+ timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
+ while ((backbuffer = poll_int_queue(dev, queue)) == NULL)
+ if (get_timer(0) > timeout) {
+ printf("Timeout poll on interrupt endpoint\n");
+ result = -ETIMEDOUT;
+ break;
+ }
+
+ if (backbuffer != buffer) {
+ debug("got wrong buffer back (%x instead of %x)\n",
+ (uint32_t)backbuffer, (uint32_t)buffer);
+ return -EINVAL;
+ }
+
+ invalidate_dcache_range((uint32_t)buffer,
+ ALIGN_END_ADDR(char, buffer, length));
+
+ ret = destroy_int_queue(dev, queue);
+ if (ret < 0)
+ return ret;
+
+ /* everything worked out fine */
+ return result;
}