usb: ehci: Get rid of CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
[oweals/u-boot.git] / drivers / usb / host / ehci-hcd.c
index 8f259bee4f0b67c2816d654163798e39085af100..3243c1d1cf250a9de353b8c05d46acd12b1efa6d 100644 (file)
@@ -52,8 +52,8 @@ static struct descriptor {
                0,              /* wHubCharacteristics */
                10,             /* bPwrOn2PwrGood */
                0,              /* bHubCntrCurrent */
-               {},             /* Device removable */
-               {}              /* at most 7 ports! XXX */
+               {               /* Device removable */
+                             /* at most 7 ports! XXX */
        },
        {
                0x12,           /* bLength */
@@ -148,9 +148,12 @@ static void ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg,
 
 static uint32_t *ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port)
 {
-       if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+       int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
+
+       if (port < 0 || port >= max_ports) {
                /* Printing the message would cause a scan failure! */
-               debug("The request port(%u) is not configured\n", port);
+               debug("The request port(%u) exceeds maximum port number\n",
+                     port);
                return NULL;
        }
 
@@ -205,18 +208,22 @@ static int ehci_shutdown(struct ehci_ctrl *ctrl)
 {
        int i, ret = 0;
        uint32_t cmd, reg;
+       int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
 
        if (!ctrl || !ctrl->hcor)
                return -EINVAL;
 
        cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
+       /* If not run, directly return */
+       if (!(cmd & CMD_RUN))
+               return 0;
        cmd &= ~(CMD_PSE | CMD_ASE);
        ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
        ret = handshake(&ctrl->hcor->or_usbsts, STS_ASS | STS_PSS, 0,
                100 * 1000);
 
        if (!ret) {
-               for (i = 0; i < CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS; i++) {
+               for (i = 0; i < max_ports; i++) {
                        reg = ehci_readl(&ctrl->hcor->or_portsc[i]);
                        reg |= EHCI_PS_SUSP;
                        ehci_writel(&ctrl->hcor->or_portsc[i], reg);
@@ -237,7 +244,7 @@ static int ehci_shutdown(struct ehci_ctrl *ctrl)
 static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
 {
        uint32_t delta, next;
-       uint32_t addr = (unsigned long)buf;
+       unsigned long addr = (unsigned long)buf;
        int idx;
 
        if (addr != ALIGN(addr, ARCH_DMA_MINALIGN))
@@ -934,7 +941,7 @@ unknown:
        return -1;
 }
 
-const struct ehci_ops default_ehci_ops = {
+static const struct ehci_ops default_ehci_ops = {
        .set_usb_mode           = ehci_set_usbmode,
        .get_port_speed         = ehci_get_port_speed,
        .powerup_fixup          = ehci_powerup_fixup,
@@ -1615,6 +1622,12 @@ int ehci_register(struct udevice *dev, struct ehci_hccr *hccr,
        if (ret)
                goto err;
 
+       if (ctrl->ops.init_after_reset) {
+               ret = ctrl->ops.init_after_reset(ctrl);
+               if (ret)
+                       goto err;
+       }
+
        ret = ehci_common_init(ctrl, tweaks);
        if (ret)
                goto err;