+// SPDX-License-Identifier: GPL-2.0+
/*
* SAMSUNG EXYNOS USB HOST EHCI Controller
*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
* Vivek Gautam <gautam.vivek@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
-#include <libfdt.h>
+#include <linux/libfdt.h>
#include <malloc.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/system.h>
#include <asm/arch/power.h>
#include <asm/gpio.h>
-#include <asm-generic/errno.h>
+#include <linux/errno.h>
#include <linux/compat.h>
#include "ehci.h"
/* Declare global data pointer */
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_DM_USB
struct exynos_ehci_platdata {
struct usb_platdata usb_plat;
fdt_addr_t hcd_base;
fdt_addr_t phy_base;
struct gpio_desc vbus_gpio;
};
-#endif
/**
* Contains pointers to register base addresses
struct ehci_ctrl ctrl;
struct exynos_usb_phy *usb;
struct ehci_hccr *hcd;
-#ifndef CONFIG_DM_USB
- struct gpio_desc vbus_gpio;
-#endif
};
-#ifndef CONFIG_DM_USB
-static struct exynos_ehci exynos;
-#endif
-
-#ifdef CONFIG_DM_USB
static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
{
struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
/*
* Get the base address for XHCI controller from the device node
*/
- plat->hcd_base = dev_get_addr(dev);
+ plat->hcd_base = devfdt_get_addr(dev);
if (plat->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
}
depth = 0;
- node = fdtdec_next_compatible_subnode(blob, dev->of_offset,
+ node = fdtdec_next_compatible_subnode(blob, dev_of_offset(dev),
COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
if (node <= 0) {
debug("XHCI: Can't get device node for usb3-phy controller\n");
return 0;
}
-#else
-static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
-{
- fdt_addr_t addr;
- unsigned int node;
- int depth;
-
- node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_EHCI);
- if (node <= 0) {
- debug("EHCI: Can't get device node for ehci\n");
- return -ENODEV;
- }
-
- /*
- * Get the base address for EHCI controller from the device node
- */
- addr = fdtdec_get_addr(blob, node, "reg");
- if (addr == FDT_ADDR_T_NONE) {
- debug("Can't get the EHCI register address\n");
- return -ENXIO;
- }
-
- exynos->hcd = (struct ehci_hccr *)addr;
-
- /* Vbus gpio */
- gpio_request_by_name_nodev(blob, node, "samsung,vbus-gpio", 0,
- &exynos->vbus_gpio, GPIOD_IS_OUT);
-
- depth = 0;
- node = fdtdec_next_compatible_subnode(blob, node,
- COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
- if (node <= 0) {
- debug("EHCI: Can't get device node for usb-phy controller\n");
- return -ENODEV;
- }
-
- /*
- * Get the base address for usbphy from the device node
- */
- exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node,
- "reg");
- if (exynos->usb == NULL) {
- debug("Can't get the usbphy register address\n");
- return -ENXIO;
- }
-
- return 0;
-}
-#endif
static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
{
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
-#ifndef CONFIG_DM_USB
-/*
- * EHCI-initialization
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- struct exynos_ehci *ctx = &exynos;
-
-#ifdef CONFIG_OF_CONTROL
- if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) {
- debug("Unable to parse device tree for ehci-exynos\n");
- return -ENODEV;
- }
-#else
- ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
- ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci();
-#endif
-
-#ifdef CONFIG_OF_CONTROL
- /* setup the Vbus gpio here */
- if (dm_gpio_is_valid(&ctx->vbus_gpio))
- dm_gpio_set_value(&ctx->vbus_gpio, 1);
-#endif
-
- setup_usb_phy(ctx->usb);
-
- board_usb_init(index, init);
-
- *hccr = ctx->hcd;
- *hcor = (struct ehci_hcor *)((uint32_t) *hccr
- + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
- debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
- (uint32_t)*hccr, (uint32_t)*hcor,
- (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
- return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
- struct exynos_ehci *ctx = &exynos;
-
- reset_usb_phy(ctx->usb);
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_DM_USB
static int ehci_usb_probe(struct udevice *dev)
{
struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
ctx->hcd = (struct ehci_hccr *)plat->hcd_base;
ctx->usb = (struct exynos_usb_phy *)plat->phy_base;
- hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd +
- HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase)));
/* setup the Vbus gpio here */
if (dm_gpio_is_valid(&plat->vbus_gpio))
dm_gpio_set_value(&plat->vbus_gpio, 1);
setup_usb_phy(ctx->usb);
+ hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd +
+ HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase)));
return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST);
}
.platdata_auto_alloc_size = sizeof(struct exynos_ehci_platdata),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
-#endif
projects / oweals / u-boot.git / blobdiff