*/
#include <common.h>
+#include <dm.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <malloc.h>
/* Declare global data pointer */
DECLARE_GLOBAL_DATA_PTR;
+struct exynos_ehci_platdata {
+ struct usb_platdata usb_plat;
+ fdt_addr_t hcd_base;
+ fdt_addr_t phy_base;
+ struct gpio_desc vbus_gpio;
+};
+
/**
* Contains pointers to register base addresses
* for the usb controller.
*/
struct exynos_ehci {
+ struct ehci_ctrl ctrl;
struct exynos_usb_phy *usb;
struct ehci_hccr *hcd;
- struct gpio_desc vbus_gpio;
};
-static struct exynos_ehci exynos;
-
-#ifdef CONFIG_OF_CONTROL
-static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
{
- fdt_addr_t addr;
+ struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
+ const void *blob = gd->fdt_blob;
unsigned int node;
int depth;
- node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_EHCI);
- if (node <= 0) {
- debug("EHCI: Can't get device node for ehci\n");
- return -ENODEV;
- }
-
/*
- * Get the base address for EHCI controller from the device node
+ * Get the base address for XHCI controller from the device node
*/
- addr = fdtdec_get_addr(blob, node, "reg");
- if (addr == FDT_ADDR_T_NONE) {
- debug("Can't get the EHCI register address\n");
+ plat->hcd_base = dev_get_addr(dev);
+ if (plat->hcd_base == FDT_ADDR_T_NONE) {
+ debug("Can't get the XHCI register base address\n");
return -ENXIO;
}
- exynos->hcd = (struct ehci_hccr *)addr;
-
- /* Vbus gpio */
- gpio_request_by_name_nodev(blob, node, "samsung,vbus-gpio", 0,
- &exynos->vbus_gpio, GPIOD_IS_OUT);
-
depth = 0;
- node = fdtdec_next_compatible_subnode(blob, node,
- COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
+ node = fdtdec_next_compatible_subnode(blob, dev->of_offset,
+ COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
if (node <= 0) {
- debug("EHCI: Can't get device node for usb-phy controller\n");
+ debug("XHCI: Can't get device node for usb3-phy controller\n");
return -ENODEV;
}
/*
* Get the base address for usbphy from the device node
*/
- exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node,
- "reg");
- if (exynos->usb == NULL) {
+ plat->phy_base = fdtdec_get_addr(blob, node, "reg");
+ if (plat->phy_base == FDT_ADDR_T_NONE) {
debug("Can't get the usbphy register address\n");
return -ENXIO;
}
+ /* Vbus gpio */
+ gpio_request_by_name(dev, "samsung,vbus-gpio", 0,
+ &plat->vbus_gpio, GPIOD_IS_OUT);
+
return 0;
}
-#endif
static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
{
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
-/*
- * EHCI-initialization
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+static int ehci_usb_probe(struct udevice *dev)
{
- struct exynos_ehci *ctx = &exynos;
+ struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
+ struct exynos_ehci *ctx = dev_get_priv(dev);
+ struct ehci_hcor *hcor;
-#ifdef CONFIG_OF_CONTROL
- if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) {
- debug("Unable to parse device tree for ehci-exynos\n");
- return -ENODEV;
- }
-#else
- ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
- ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci();
-#endif
+ ctx->hcd = (struct ehci_hccr *)plat->hcd_base;
+ ctx->usb = (struct exynos_usb_phy *)plat->phy_base;
-#ifdef CONFIG_OF_CONTROL
/* setup the Vbus gpio here */
- if (dm_gpio_is_valid(&ctx->vbus_gpio))
- dm_gpio_set_value(&ctx->vbus_gpio, 1);
-#endif
+ if (dm_gpio_is_valid(&plat->vbus_gpio))
+ dm_gpio_set_value(&plat->vbus_gpio, 1);
setup_usb_phy(ctx->usb);
+ hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd +
+ HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase)));
- board_usb_init(index, init);
-
- *hccr = ctx->hcd;
- *hcor = (struct ehci_hcor *)((uint32_t) *hccr
- + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
- debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
- (uint32_t)*hccr, (uint32_t)*hcor,
- (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
- return 0;
+ return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST);
}
-/*
- * Destroy the appropriate control structures corresponding
- * the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
+static int ehci_usb_remove(struct udevice *dev)
{
- struct exynos_ehci *ctx = &exynos;
+ struct exynos_ehci *ctx = dev_get_priv(dev);
+ int ret;
+ ret = ehci_deregister(dev);
+ if (ret)
+ return ret;
reset_usb_phy(ctx->usb);
return 0;
}
+
+static const struct udevice_id ehci_usb_ids[] = {
+ { .compatible = "samsung,exynos-ehci" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_ehci) = {
+ .name = "ehci_exynos",
+ .id = UCLASS_USB,
+ .of_match = ehci_usb_ids,
+ .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+ .probe = ehci_usb_probe,
+ .remove = ehci_usb_remove,
+ .ops = &ehci_usb_ops,
+ .priv_auto_alloc_size = sizeof(struct exynos_ehci),
+ .platdata_auto_alloc_size = sizeof(struct exynos_ehci_platdata),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};