#include <memalign.h>
#include <phys2bus.h>
#include <usbroothubdes.h>
+#include <wait_bit.h>
#include <asm/io.h>
+#include <power/regulator.h>
#include "dwc2.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* Use only HC channel 0. */
#define DWC2_HC_CHANNEL 0
u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
struct dwc2_core_regs *regs;
int root_hub_devnum;
+ bool ext_vbus;
+ /*
+ * The hnp/srp capability must be disabled if the platform
+ * does't support hnp/srp. Otherwise the force mode can't work.
+ */
+ bool hnp_srp_disable;
+ bool oc_disable;
};
#ifndef CONFIG_DM_USB
/*
* DWC2 IP interface
*/
-static int wait_for_bit(void *reg, const uint32_t mask, bool set)
-{
- unsigned int timeout = 1000000;
- uint32_t val;
-
- while (--timeout) {
- val = readl(reg);
- if (!set)
- val = ~val;
-
- if ((val & mask) == mask)
- return 0;
-
- udelay(1);
- }
-
- debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
- __func__, reg, mask, set);
-
- return -ETIMEDOUT;
-}
/*
* Initializes the FSLSPClkSel field of the HCFG register
writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
®s->grstctl);
- ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_TXFFLSH, 0);
+ ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_TXFFLSH,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
int ret;
writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl);
- ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_RXFFLSH, 0);
+ ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_RXFFLSH,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
int ret;
/* Wait for AHB master IDLE state. */
- ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_AHBIDLE, 1);
+ ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_AHBIDLE,
+ true, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Core Soft Reset */
writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl);
- ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_CSFTRST, 0);
+ ret = wait_for_bit(__func__, ®s->grstctl, DWC2_GRSTCTL_CSFTRST,
+ false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
mdelay(100);
}
+#if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR)
+static int dwc_vbus_supply_init(struct udevice *dev)
+{
+ struct udevice *vbus_supply;
+ int ret;
+
+ ret = device_get_supply_regulator(dev, "vbus-supply", &vbus_supply);
+ if (ret) {
+ debug("%s: No vbus supply\n", dev->name);
+ return 0;
+ }
+
+ ret = regulator_set_enable(vbus_supply, true);
+ if (ret) {
+ pr_err("Error enabling vbus supply\n");
+ return ret;
+ }
+
+ return 0;
+}
+#else
+static int dwc_vbus_supply_init(struct udevice *dev)
+{
+ return 0;
+}
+#endif
+
/*
* This function initializes the DWC_otg controller registers for
* host mode.
* request queues. Host channels are reset to ensure that they are ready for
* performing transfers.
*
+ * @param dev USB Device (NULL if driver model is not being used)
* @param regs Programming view of DWC_otg controller
*
*/
-static void dwc_otg_core_host_init(struct dwc2_core_regs *regs)
+static void dwc_otg_core_host_init(struct udevice *dev,
+ struct dwc2_core_regs *regs)
{
uint32_t nptxfifosize = 0;
uint32_t ptxfifosize = 0;
clrsetbits_le32(®s->hc_regs[i].hcchar,
DWC2_HCCHAR_EPDIR,
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
- ret = wait_for_bit(®s->hc_regs[i].hcchar,
- DWC2_HCCHAR_CHEN, 0);
+ ret = wait_for_bit(__func__, ®s->hc_regs[i].hcchar,
+ DWC2_HCCHAR_CHEN, false, 1000, false);
if (ret)
printf("%s: Timeout!\n", __func__);
}
writel(hprt0, ®s->hprt0);
}
}
+
+ if (dev)
+ dwc_vbus_supply_init(dev);
}
/*
*
* @param regs Programming view of the DWC_otg controller
*/
-static void dwc_otg_core_init(struct dwc2_core_regs *regs)
+static void dwc_otg_core_init(struct dwc2_priv *priv)
{
+ struct dwc2_core_regs *regs = priv->regs;
uint32_t ahbcfg = 0;
uint32_t usbcfg = 0;
uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE;
usbcfg = readl(®s->gusbcfg);
/* Program the ULPI External VBUS bit if needed */
-#ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS
- usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
-#else
- usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
-#endif
+ if (priv->ext_vbus) {
+ usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
+ if (!priv->oc_disable) {
+ usbcfg |= DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR |
+ DWC2_GUSBCFG_INDICATOR_PASSTHROUGH;
+ }
+ } else {
+ usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
+ }
/* Set external TS Dline pulsing */
#ifdef CONFIG_DWC2_TS_DLINE
usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M;
}
#endif
+ if (priv->hnp_srp_disable)
+ usbcfg |= DWC2_GUSBCFG_FORCEHOSTMODE;
+
writel(usbcfg, ®s->gusbcfg);
/* Program the GAHBCFG Register. */
writel(ahbcfg, ®s->gahbcfg);
- /* Program the GUSBCFG register for HNP/SRP. */
- setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP);
+ /* Program the capabilities in GUSBCFG Register */
+ usbcfg = 0;
+ if (!priv->hnp_srp_disable)
+ usbcfg |= DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP;
#ifdef CONFIG_DWC2_IC_USB_CAP
- setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_IC_USB_CAP);
+ usbcfg |= DWC2_GUSBCFG_IC_USB_CAP;
#endif
+
+ setbits_le32(®s->gusbcfg, usbcfg);
}
/*
int ret;
uint32_t hcint, hctsiz;
- ret = wait_for_bit(&hc_regs->hcint, DWC2_HCINT_CHHLTD, true);
+ ret = wait_for_bit(__func__, &hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
+ 1000, false);
if (ret)
return ret;
(*pid << DWC2_HCTSIZ_PID_OFFSET),
&hc_regs->hctsiz);
- if (!in && xfer_len) {
- memcpy(aligned_buffer, buffer, xfer_len);
-
- flush_dcache_range((unsigned long)aligned_buffer,
- (unsigned long)aligned_buffer +
- roundup(xfer_len, ARCH_DMA_MINALIGN));
+ if (xfer_len) {
+ if (in) {
+ invalidate_dcache_range(
+ (uintptr_t)aligned_buffer,
+ (uintptr_t)aligned_buffer +
+ roundup(xfer_len, ARCH_DMA_MINALIGN));
+ } else {
+ memcpy(aligned_buffer, buffer, xfer_len);
+ flush_dcache_range(
+ (uintptr_t)aligned_buffer,
+ (uintptr_t)aligned_buffer +
+ roundup(xfer_len, ARCH_DMA_MINALIGN));
+ }
}
writel(phys_to_bus((unsigned long)aligned_buffer), &hc_regs->hcdma);
}
}
-static int dwc2_init_common(struct dwc2_priv *priv)
+static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv)
{
struct dwc2_core_regs *regs = priv->regs;
uint32_t snpsid;
return -ENODEV;
}
- dwc_otg_core_init(regs);
- dwc_otg_core_host_init(regs);
+#ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS
+ priv->ext_vbus = 1;
+#else
+ priv->ext_vbus = 0;
+#endif
+
+ dwc_otg_core_init(priv);
+ dwc_otg_core_host_init(dev, regs);
clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
}
}
+ /*
+ * Add a 1 second delay here. This gives the host controller
+ * a bit time before the comminucation with the USB devices
+ * is started (the bus is scanned) and fixes the USB detection
+ * problems with some problematic USB keys.
+ */
+ if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
+ mdelay(1000);
+
return 0;
}
if (board_usb_init(index, USB_INIT_HOST))
return -1;
- return dwc2_init_common(priv);
+ return dwc2_init_common(NULL, priv);
}
int usb_lowlevel_stop(int index)
struct dwc2_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
- addr = dev_get_addr(dev);
+ addr = dev_read_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
priv->regs = (struct dwc2_core_regs *)addr;
+ priv->oc_disable = dev_read_bool(dev, "disable-over-current");
+ priv->hnp_srp_disable = dev_read_bool(dev, "hnp-srp-disable");
+
return 0;
}
static int dwc2_usb_probe(struct udevice *dev)
{
struct dwc2_priv *priv = dev_get_priv(dev);
+ struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev);
+
+ bus_priv->desc_before_addr = true;
- return dwc2_init_common(priv);
+ return dwc2_init_common(dev, priv);
}
static int dwc2_usb_remove(struct udevice *dev)
projects / oweals / u-boot.git / blobdiff