Start pci hose scan from hose->current_busno.

[oweals/u-boot.git] / drivers / tsec.h

diff --git a/drivers/tsec.h b/drivers/tsec.h
index b55b2992b226f921a889bcf4a4c3338116668952..7bf3dee2b6859ae67860c0b12a69ab1791ccfea3 100644 (file)
--- a/drivers/tsec.h
+++ b/drivers/tsec.h
@@ -7,7 +7,7 @@
  *  terms of the GNU Public License, Version 2, incorporated
  *  herein by reference.
  *
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
  * (C) Copyright 2003, Motorola, Inc.
  * maintained by Xianghua Xiao (x.xiao@motorola.com)
  * author Andy Fleming
@@ -27,10 +27,10 @@
 #define TSEC_SIZE      0x01000
 
 /* FIXME:  Should these be pushed back to 83xx and 85xx config files? */
-#if defined(CONFIG_MPC85xx)
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
     #define TSEC_BASE_ADDR     (CFG_IMMR + CFG_TSEC1_OFFSET)
 #elif defined(CONFIG_MPC83XX)
-    #define TSEC_BASE_ADDR     (CFG_IMMRBAR + CFG_TSEC1_OFFSET)
+    #define TSEC_BASE_ADDR     (CFG_IMMR + CFG_TSEC1_OFFSET)
 #endif
 
 
@@ -65,6 +65,7 @@
 #define ECNTRL_INIT_SETTINGS   0x00001000
 #define ECNTRL_TBI_MODE         0x00000020
 #define ECNTRL_R100            0x00000008
+#define ECNTRL_SGMII_MODE      0x00000002
 
 #define miim_end -2
 #define miim_read -1
@@ -109,6 +110,11 @@
 #define MIIM_GBIT_CONTROL      0x9
 #define MIIM_GBIT_CONTROL_INIT 0xe00
 
+/* Broadcom BCM54xx -- taken from linux sungem_phy */
+#define MIIM_BCM54xx_AUXSTATUS                 0x19
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK   0x0700
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT  8
+
 /* Cicada Auxiliary Control/Status Register */
 #define MIIM_CIS8201_AUX_CONSTAT        0x1c
 #define MIIM_CIS8201_AUXCONSTAT_INIT    0x0004
@@ -133,6 +139,24 @@
 #define MIIM_GBIT_CON          0x09
 #define MIIM_GBIT_CON_ADVERT   0x0e00
 
+/* Entry for Vitesse VSC8244 regs starts here */
+/* Vitesse VSC8244 Auxiliary Control/Status Register */
+#define MIIM_VSC8244_AUX_CONSTAT        0x1c
+#define MIIM_VSC8244_AUXCONSTAT_INIT    0x0000
+#define MIIM_VSC8244_AUXCONSTAT_DUPLEX  0x0020
+#define MIIM_VSC8244_AUXCONSTAT_SPEED   0x0018
+#define MIIM_VSC8244_AUXCONSTAT_GBIT    0x0010
+#define MIIM_VSC8244_AUXCONSTAT_100     0x0008
+#define MIIM_CONTROL_INIT_LOOPBACK      0x4000
+
+/* Vitesse VSC8244 Extended PHY Control Register 1 */
+#define MIIM_VSC8244_EPHY_CON           0x17
+#define MIIM_VSC8244_EPHYCON_INIT       0x0006
+
+/* Vitesse VSC8244 Serial LED Control Register */
+#define MIIM_VSC8244_LED_CON            0x1b
+#define MIIM_VSC8244_LEDCON_INIT        0xF011
+
 /* 88E1011 PHY Status Register */
 #define MIIM_88E1011_PHY_STATUS         0x11
 #define MIIM_88E1011_PHYSTAT_SPEED      0xc000
@@ -142,6 +166,23 @@
 #define MIIM_88E1011_PHYSTAT_SPDDONE   0x0800
 #define MIIM_88E1011_PHYSTAT_LINK      0x0400
 
+#define MIIM_88E1011_PHY_SCR           0x10
+#define MIIM_88E1011_PHY_MDI_X_AUTO    0x0060
+
+/* 88E1111 PHY LED Control Register */
+#define MIIM_88E1111_PHY_LED_CONTROL   24
+#define MIIM_88E1111_PHY_LED_DIRECT    0x4100
+#define MIIM_88E1111_PHY_LED_COMBINE   0x411C
+
+/* 88E1145 Extended PHY Specific Control Register */
+#define MIIM_88E1145_PHY_EXT_CR 20
+#define MIIM_M88E1145_RGMII_RX_DELAY   0x0080
+#define MIIM_M88E1145_RGMII_TX_DELAY   0x0002
+
+#define MIIM_88E1145_PHY_PAGE   29
+#define MIIM_88E1145_PHY_CAL_OV 30
+
+
 /* DM9161 Control register values */
 #define MIIM_DM9161_CR_STOP    0x0400
 #define MIIM_DM9161_CR_RSTAN   0x1200