+// SPDX-License-Identifier: GPL-2.0+
/*
* TI QSPI driver
*
* Copyright (C) 2013, Texas Instruments, Incorporated
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <cpu_func.h>
+#include <log.h>
+#include <asm/cache.h>
#include <asm/io.h>
#include <asm/arch/omap.h>
#include <malloc.h>
#include <spi.h>
+#include <spi-mem.h>
#include <dm.h>
#include <asm/gpio.h>
#include <asm/omap_gpio.h>
#include <asm/omap_common.h>
#include <asm/ti-common/ti-edma3.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <regmap.h>
+#include <syscon.h>
DECLARE_GLOBAL_DATA_PTR;
/* ti qpsi register bit masks */
#define QSPI_TIMEOUT 2000000
-#define QSPI_FCLK 192000000
+#define QSPI_FCLK 192000000
+#define QSPI_DRA7XX_FCLK 76800000
+#define QSPI_WLEN_MAX_BITS 128
+#define QSPI_WLEN_MAX_BYTES (QSPI_WLEN_MAX_BITS >> 3)
+#define QSPI_WLEN_MASK QSPI_WLEN(QSPI_WLEN_MAX_BITS)
/* clock control */
#define QSPI_CLK_EN BIT(31)
#define QSPI_CLK_DIV_MAX 0xffff
#define QSPI_INVAL (4 << 16)
#define QSPI_RD_QUAD (7 << 16)
/* device control */
-#define QSPI_DD(m, n) (m << (3 + n*8))
#define QSPI_CKPHA(n) (1 << (2 + n*8))
#define QSPI_CSPOL(n) (1 << (1 + n*8))
#define QSPI_CKPOL(n) (1 << (n*8))
#define QSPI_XFER_DONE QSPI_WC
#define MM_SWITCH 0x01
#define MEM_CS(cs) ((cs + 1) << 8)
-#define MEM_CS_UNSELECT 0xfffff0ff
-#define MMAP_START_ADDR_DRA 0x5c000000
-#define MMAP_START_ADDR_AM43x 0x30000000
-#define CORE_CTRL_IO 0x4a002558
-
-#define QSPI_CMD_READ (0x3 << 0)
-#define QSPI_CMD_READ_DUAL (0x6b << 0)
-#define QSPI_CMD_READ_QUAD (0x6c << 0)
-#define QSPI_CMD_READ_FAST (0x0b << 0)
-#define QSPI_SETUP0_NUM_A_BYTES (0x3 << 8)
-#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
-#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10)
+#define MEM_CS_UNSELECT 0xfffff8ff
+
#define QSPI_SETUP0_READ_NORMAL (0x0 << 12)
#define QSPI_SETUP0_READ_DUAL (0x1 << 12)
#define QSPI_SETUP0_READ_QUAD (0x3 << 12)
-#define QSPI_CMD_WRITE (0x12 << 16)
-#define QSPI_NUM_DUMMY_BITS (0x0 << 24)
+#define QSPI_SETUP0_ADDR_SHIFT (8)
+#define QSPI_SETUP0_DBITS_SHIFT (10)
+
+#define TI_QSPI_SETUP_REG(priv, cs) (&(priv)->base->setup0 + (cs))
/* ti qspi register set */
struct ti_qspi_regs {
/* ti qspi priv */
struct ti_qspi_priv {
-#ifndef CONFIG_DM_SPI
- struct spi_slave slave;
-#else
void *memory_map;
+ size_t mmap_size;
uint max_hz;
u32 num_cs;
-#endif
struct ti_qspi_regs *base;
void *ctrl_mod_mmap;
+ ulong fclk;
unsigned int mode;
u32 cmd;
u32 dc;
};
-static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
+static int ti_qspi_set_speed(struct udevice *bus, uint hz)
{
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
uint clk_div;
- debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
-
if (!hz)
clk_div = 0;
else
- clk_div = (QSPI_FCLK / hz) - 1;
+ clk_div = DIV_ROUND_UP(priv->fclk, hz) - 1;
+
+ /* truncate clk_div value to QSPI_CLK_DIV_MAX */
+ if (clk_div > QSPI_CLK_DIV_MAX)
+ clk_div = QSPI_CLK_DIV_MAX;
+
+ debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
/* disable SCLK */
writel(readl(&priv->base->clk_ctrl) & ~QSPI_CLK_EN,
&priv->base->clk_ctrl);
-
- /* assign clk_div values */
- if (clk_div < 0)
- clk_div = 0;
- else if (clk_div > QSPI_CLK_DIV_MAX)
- clk_div = QSPI_CLK_DIV_MAX;
-
- /* enable SCLK */
+ /* enable SCLK and program the clk divider */
writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
+
+ return 0;
}
static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
readl(&priv->base->cmd);
}
-static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
-{
- priv->dc = 0;
- if (mode & SPI_CPHA)
- priv->dc |= QSPI_CKPHA(0);
- if (mode & SPI_CPOL)
- priv->dc |= QSPI_CKPOL(0);
- if (mode & SPI_CS_HIGH)
- priv->dc |= QSPI_CSPOL(0);
-
- return 0;
-}
-
-static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs)
-{
- writel(priv->dc, &priv->base->dc);
- writel(0, &priv->base->cmd);
- writel(0, &priv->base->data);
-
- priv->dc <<= cs * 8;
- writel(priv->dc, &priv->base->dc);
-
- return 0;
-}
-
-static void __ti_qspi_release_bus(struct ti_qspi_priv *priv)
-{
- writel(0, &priv->base->dc);
- writel(0, &priv->base->cmd);
- writel(0, &priv->base->data);
-}
-
static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
{
u32 val;
writel(val, ctrl_mod_mmap);
}
-static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags,
- u32 cs)
+static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
+ struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
uint words = bitlen >> 3; /* fixed 8-bit word length */
const uchar *txp = dout;
uchar *rxp = din;
uint status;
int timeout;
+ unsigned int cs = slave->cs;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
- /* Setup mmap flags */
- if (flags & SPI_XFER_MMAP) {
- writel(MM_SWITCH, &priv->base->memswitch);
- if (priv->ctrl_mod_mmap)
- ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, true);
- return 0;
- } else if (flags & SPI_XFER_MMAP_END) {
- writel(~MM_SWITCH, &priv->base->memswitch);
- if (priv->ctrl_mod_mmap)
- ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, false);
- return 0;
+ if (cs > priv->num_cs) {
+ debug("invalid qspi chip select\n");
+ return -EINVAL;
}
if (bitlen == 0)
priv->cmd |= QSPI_3_PIN;
priv->cmd |= 0xfff;
-/* FIXME: This delay is required for successfull
- * completion of read/write/erase. Once its root
- * caused, it will be remove from the driver.
- */
-#ifdef CONFIG_AM43XX
- udelay(100);
-#endif
- while (words--) {
+ while (words) {
+ u8 xfer_len = 0;
+
if (txp) {
- debug("tx cmd %08x dc %08x data %02x\n",
- priv->cmd | QSPI_WR_SNGL, priv->dc, *txp);
- writel(*txp++, &priv->base->data);
- writel(priv->cmd | QSPI_WR_SNGL,
- &priv->base->cmd);
+ u32 cmd = priv->cmd;
+
+ if (words >= QSPI_WLEN_MAX_BYTES) {
+ u32 *txbuf = (u32 *)txp;
+ u32 data;
+
+ data = cpu_to_be32(*txbuf++);
+ writel(data, &priv->base->data3);
+ data = cpu_to_be32(*txbuf++);
+ writel(data, &priv->base->data2);
+ data = cpu_to_be32(*txbuf++);
+ writel(data, &priv->base->data1);
+ data = cpu_to_be32(*txbuf++);
+ writel(data, &priv->base->data);
+ cmd &= ~QSPI_WLEN_MASK;
+ cmd |= QSPI_WLEN(QSPI_WLEN_MAX_BITS);
+ xfer_len = QSPI_WLEN_MAX_BYTES;
+ } else {
+ writeb(*txp, &priv->base->data);
+ xfer_len = 1;
+ }
+ debug("tx cmd %08x dc %08x\n",
+ cmd | QSPI_WR_SNGL, priv->dc);
+ writel(cmd | QSPI_WR_SNGL, &priv->base->cmd);
status = readl(&priv->base->status);
timeout = QSPI_TIMEOUT;
while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
}
status = readl(&priv->base->status);
}
+ txp += xfer_len;
debug("tx done, status %08x\n", status);
}
if (rxp) {
- priv->cmd |= QSPI_RD_SNGL;
debug("rx cmd %08x dc %08x\n",
- priv->cmd, priv->dc);
- #ifdef CONFIG_DRA7XX
- udelay(500);
- #endif
- writel(priv->cmd, &priv->base->cmd);
+ ((u32)(priv->cmd | QSPI_RD_SNGL)), priv->dc);
+ writel(priv->cmd | QSPI_RD_SNGL, &priv->base->cmd);
status = readl(&priv->base->status);
timeout = QSPI_TIMEOUT;
while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
status = readl(&priv->base->status);
}
*rxp++ = readl(&priv->base->data);
+ xfer_len = 1;
debug("rx done, status %08x, read %02x\n",
status, *(rxp-1));
}
+ words -= xfer_len;
}
/* Terminate frame */
}
/* TODO: control from sf layer to here through dm-spi */
-#ifdef CONFIG_TI_EDMA3
-void spi_flash_copy_mmap(void *data, void *offset, size_t len)
+static void ti_qspi_copy_mmap(void *data, void *offset, size_t len)
{
+#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
unsigned int addr = (unsigned int) (data);
unsigned int edma_slot_num = 1;
/* disable edma3 clocks */
disable_edma3_clocks();
-
- *((unsigned int *)offset) += len;
-}
-#endif
-
-#ifndef CONFIG_DM_SPI
-
-static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
-{
- return container_of(slave, struct ti_qspi_priv, slave);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- /* CS handled in xfer */
- return;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
- ti_qspi_cs_deactivate(priv);
-}
-
-void spi_init(void)
-{
- /* nothing to do */
-}
-
-static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
-{
- u32 memval = 0;
-
-#ifdef CONFIG_QSPI_QUAD_SUPPORT
- struct spi_slave *slave = &priv->slave;
- memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
- QSPI_SETUP0_NUM_D_BYTES_8_BITS |
- QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
- QSPI_NUM_DUMMY_BITS);
- slave->mode_rx = SPI_RX_QUAD;
#else
- memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
- QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
- QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
- QSPI_NUM_DUMMY_BITS;
+ memcpy_fromio(data, offset, len);
#endif
- writel(memval, &priv->base->setup0);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct ti_qspi_priv *priv;
-
-#ifdef CONFIG_AM43XX
- gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
- gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
-#endif
-
- priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
- if (!priv) {
- printf("SPI_error: Fail to allocate ti_qspi_priv\n");
- return NULL;
- }
-
- priv->base = (struct ti_qspi_regs *)QSPI_BASE;
- priv->mode = mode;
-#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
- priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
- priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
-#else
- priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
-#endif
-
- ti_spi_set_speed(priv, max_hz);
-
-#ifdef CONFIG_TI_SPI_MMAP
- ti_spi_setup_spi_register(priv);
-#endif
-
- return &priv->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
- free(priv);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
- __ti_qspi_set_mode(priv, priv->mode);
- return __ti_qspi_claim_bus(priv, priv->slave.cs);
-}
-void spi_release_bus(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
- __ti_qspi_release_bus(priv);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n",
- priv->slave.bus, priv->slave.cs, bitlen, flags);
- return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
+ *((unsigned int *)offset) += len;
}
-#else /* CONFIG_DM_SPI */
-
-static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
- struct spi_slave *slave,
- bool enable)
+static void ti_qspi_setup_mmap_read(struct ti_qspi_priv *priv, int cs,
+ u8 opcode, u8 data_nbits, u8 addr_width,
+ u8 dummy_bytes)
{
- u32 memval;
- u32 mode = slave->mode_rx & (SPI_RX_QUAD | SPI_RX_DUAL);
-
- if (!enable) {
- writel(0, &priv->base->setup0);
- return;
- }
+ u32 memval = opcode;
- memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
-
- switch (mode) {
- case SPI_RX_QUAD:
- memval |= QSPI_CMD_READ_QUAD;
- memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ switch (data_nbits) {
+ case 4:
memval |= QSPI_SETUP0_READ_QUAD;
- slave->mode_rx = SPI_RX_QUAD;
break;
- case SPI_RX_DUAL:
- memval |= QSPI_CMD_READ_DUAL;
- memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ case 2:
memval |= QSPI_SETUP0_READ_DUAL;
break;
default:
- memval |= QSPI_CMD_READ;
- memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
memval |= QSPI_SETUP0_READ_NORMAL;
break;
}
- writel(memval, &priv->base->setup0);
-}
+ memval |= ((addr_width - 1) << QSPI_SETUP0_ADDR_SHIFT |
+ dummy_bytes << QSPI_SETUP0_DBITS_SHIFT);
+ writel(memval, TI_QSPI_SETUP_REG(priv, cs));
+}
-static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
+static int ti_qspi_set_mode(struct udevice *bus, uint mode)
{
struct ti_qspi_priv *priv = dev_get_priv(bus);
- ti_spi_set_speed(priv, max_hz);
+ priv->dc = 0;
+ if (mode & SPI_CPHA)
+ priv->dc |= QSPI_CKPHA(0);
+ if (mode & SPI_CPOL)
+ priv->dc |= QSPI_CKPOL(0);
+ if (mode & SPI_CS_HIGH)
+ priv->dc |= QSPI_CSPOL(0);
return 0;
}
-static int ti_qspi_set_mode(struct udevice *bus, uint mode)
+static int ti_qspi_exec_mem_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
{
- struct ti_qspi_priv *priv = dev_get_priv(bus);
- return __ti_qspi_set_mode(priv, mode);
+ struct dm_spi_slave_platdata *slave_plat;
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
+ u32 from = 0;
+ int ret = 0;
+
+ bus = slave->dev->parent;
+ priv = dev_get_priv(bus);
+ slave_plat = dev_get_parent_platdata(slave->dev);
+
+ /* Only optimize read path. */
+ if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN ||
+ !op->addr.nbytes || op->addr.nbytes > 4)
+ return -ENOTSUPP;
+
+ /* Address exceeds MMIO window size, fall back to regular mode. */
+ from = op->addr.val;
+ if (from + op->data.nbytes > priv->mmap_size)
+ return -ENOTSUPP;
+
+ ti_qspi_setup_mmap_read(priv, slave_plat->cs, op->cmd.opcode,
+ op->data.buswidth, op->addr.nbytes,
+ op->dummy.nbytes);
+
+ ti_qspi_copy_mmap((void *)op->data.buf.in,
+ (void *)priv->memory_map + from, op->data.nbytes);
+
+ return ret;
}
static int ti_qspi_claim_bus(struct udevice *dev)
{
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
- struct spi_slave *slave = dev_get_parent_priv(dev);
struct ti_qspi_priv *priv;
struct udevice *bus;
return -EINVAL;
}
- __ti_qspi_setup_memorymap(priv, slave, true);
+ writel(MM_SWITCH, &priv->base->memswitch);
+ if (priv->ctrl_mod_mmap)
+ ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+ slave_plat->cs, true);
+
+ writel(priv->dc, &priv->base->dc);
+ writel(0, &priv->base->cmd);
+ writel(0, &priv->base->data);
- return __ti_qspi_claim_bus(priv, slave_plat->cs);
+ priv->dc <<= slave_plat->cs * 8;
+ writel(priv->dc, &priv->base->dc);
+
+ return 0;
}
static int ti_qspi_release_bus(struct udevice *dev)
{
- struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
struct ti_qspi_priv *priv;
struct udevice *bus;
bus = dev->parent;
priv = dev_get_priv(bus);
- __ti_qspi_setup_memorymap(priv, slave, false);
- __ti_qspi_release_bus(priv);
+ writel(~MM_SWITCH, &priv->base->memswitch);
+ if (priv->ctrl_mod_mmap)
+ ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+ slave_plat->cs, false);
+
+ writel(0, &priv->base->dc);
+ writel(0, &priv->base->cmd);
+ writel(0, &priv->base->data);
+ writel(0, TI_QSPI_SETUP_REG(priv, slave_plat->cs));
return 0;
}
-static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
+static int ti_qspi_probe(struct udevice *bus)
{
- struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
- struct ti_qspi_priv *priv;
- struct udevice *bus;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
- if (slave->cs > priv->num_cs) {
- debug("invalid qspi chip select\n");
- return -EINVAL;
- }
+ priv->fclk = dev_get_driver_data(bus);
- return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
+ return 0;
}
-static int ti_qspi_probe(struct udevice *bus)
+static void *map_syscon_chipselects(struct udevice *bus)
{
- /* Nothing to do in probe */
- return 0;
+#if CONFIG_IS_ENABLED(SYSCON)
+ struct udevice *syscon;
+ struct regmap *regmap;
+ const fdt32_t *cell;
+ int len, err;
+
+ err = uclass_get_device_by_phandle(UCLASS_SYSCON, bus,
+ "syscon-chipselects", &syscon);
+ if (err) {
+ debug("%s: unable to find syscon device (%d)\n", __func__,
+ err);
+ return NULL;
+ }
+
+ regmap = syscon_get_regmap(syscon);
+ if (IS_ERR(regmap)) {
+ debug("%s: unable to find regmap (%ld)\n", __func__,
+ PTR_ERR(regmap));
+ return NULL;
+ }
+
+ cell = fdt_getprop(gd->fdt_blob, dev_of_offset(bus),
+ "syscon-chipselects", &len);
+ if (len < 2*sizeof(fdt32_t)) {
+ debug("%s: offset not available\n", __func__);
+ return NULL;
+ }
+
+ return fdtdec_get_number(cell + 1, 1) + regmap_get_range(regmap, 0);
+#else
+ fdt_addr_t addr;
+ addr = devfdt_get_addr_index(bus, 2);
+ return (addr == FDT_ADDR_T_NONE) ? NULL :
+ map_physmem(addr, 0, MAP_NOCACHE);
+#endif
}
static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
{
struct ti_qspi_priv *priv = dev_get_priv(bus);
const void *blob = gd->fdt_blob;
- int node = bus->of_offset;
- fdt_addr_t addr;
+ int node = dev_of_offset(bus);
+ fdt_addr_t mmap_addr;
+ fdt_addr_t mmap_size;
- priv->base = (struct ti_qspi_regs *)dev_get_addr(bus);
- priv->memory_map = (void *)dev_get_addr_index(bus, 1);
- addr = dev_get_addr_index(bus, 2);
- priv->ctrl_mod_mmap = (addr == FDT_ADDR_T_NONE) ? NULL : (void *)addr;
+ priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
+ priv->base = map_physmem(devfdt_get_addr(bus),
+ sizeof(struct ti_qspi_regs), MAP_NOCACHE);
+ mmap_addr = devfdt_get_addr_size_index(bus, 1, &mmap_size);
+ priv->memory_map = map_physmem(mmap_addr, mmap_size, MAP_NOCACHE);
+ priv->mmap_size = mmap_size;
priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
if (priv->max_hz < 0) {
return 0;
}
-static int ti_qspi_child_pre_probe(struct udevice *dev)
-{
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct udevice *bus = dev_get_parent(dev);
- struct ti_qspi_priv *priv = dev_get_priv(bus);
-
- slave->memory_map = priv->memory_map;
- return 0;
-}
+static const struct spi_controller_mem_ops ti_qspi_mem_ops = {
+ .exec_op = ti_qspi_exec_mem_op,
+};
static const struct dm_spi_ops ti_qspi_ops = {
.claim_bus = ti_qspi_claim_bus,
.xfer = ti_qspi_xfer,
.set_speed = ti_qspi_set_speed,
.set_mode = ti_qspi_set_mode,
+ .mem_ops = &ti_qspi_mem_ops,
};
static const struct udevice_id ti_qspi_ids[] = {
- { .compatible = "ti,dra7xxx-qspi" },
- { .compatible = "ti,am4372-qspi" },
+ { .compatible = "ti,dra7xxx-qspi", .data = QSPI_DRA7XX_FCLK},
+ { .compatible = "ti,am4372-qspi", .data = QSPI_FCLK},
{ }
};
.ofdata_to_platdata = ti_qspi_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct ti_qspi_priv),
.probe = ti_qspi_probe,
- .child_pre_probe = ti_qspi_child_pre_probe,
};
-#endif /* CONFIG_DM_SPI */
projects / oweals / u-boot.git / blobdiff