/*
* Copyright (C) 2007 Atmel Corporation
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <fdtdec.h>
#include <spi.h>
#include <malloc.h>
+#include <wait_bit.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
-#include <asm/arch/memory-map.h>
+#include <asm/arch/hardware.h>
+#ifdef CONFIG_DM_SPI
+#include <asm/arch/at91_spi.h>
+#endif
+#ifdef CONFIG_DM_GPIO
+#include <asm/gpio.h>
+#endif
#include "atmel_spi.h"
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_DM_SPI
+
+static int spi_has_wdrbt(struct atmel_spi_slave *slave)
+{
+ unsigned int ver;
+
+ ver = spi_readl(slave, VERSION);
+
+ return (ATMEL_SPI_VERSION_REV(ver) >= 0x210);
+}
+
void spi_init()
{
switch (bus) {
case 0:
- regs = (void *)SPI0_BASE;
+ regs = (void *)ATMEL_BASE_SPI0;
break;
-#ifdef SPI1_BASE
+#ifdef ATMEL_BASE_SPI1
case 1:
- regs = (void *)SPI1_BASE;
+ regs = (void *)ATMEL_BASE_SPI1;
break;
#endif
-#ifdef SPI2_BASE
+#ifdef ATMEL_BASE_SPI2
case 2:
- regs = (void *)SPI2_BASE;
+ regs = (void *)ATMEL_BASE_SPI2;
break;
#endif
-#ifdef SPI3_BASE
+#ifdef ATMEL_BASE_SPI3
case 3:
- regs = (void *)SPI3_BASE;
+ regs = (void *)ATMEL_BASE_SPI3;
break;
#endif
default:
if (mode & SPI_CPOL)
csrx |= ATMEL_SPI_CSRx_CPOL;
- as = malloc(sizeof(struct atmel_spi_slave));
+ as = spi_alloc_slave(struct atmel_spi_slave, bus, cs);
if (!as)
return NULL;
- as->slave.bus = bus;
- as->slave.cs = cs;
as->regs = regs;
as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS
| ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf);
+ if (spi_has_wdrbt(as))
+ as->mr |= ATMEL_SPI_MR_WDRBT;
+
spi_writel(as, CSR(cs), csrx);
return &as->slave;
unsigned int len_tx;
unsigned int len_rx;
unsigned int len;
- int ret;
u32 status;
const u8 *txp = dout;
u8 *rxp = din;
u8 value;
- ret = 0;
if (bitlen == 0)
/* Finish any previously submitted transfers */
goto out;
return 0;
}
+
+#else
+
+#define MAX_CS_COUNT 4
+
+struct atmel_spi_platdata {
+ struct at91_spi *regs;
+};
+
+struct atmel_spi_priv {
+ unsigned int freq; /* Default frequency */
+ unsigned int mode;
+ ulong bus_clk_rate;
+ struct gpio_desc cs_gpios[MAX_CS_COUNT];
+};
+
+static int atmel_spi_claim_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct atmel_spi_platdata *bus_plat = dev_get_platdata(bus);
+ struct atmel_spi_priv *priv = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+ struct at91_spi *reg_base = bus_plat->regs;
+ u32 cs = slave_plat->cs;
+ u32 freq = priv->freq;
+ u32 scbr, csrx, mode;
+
+ scbr = (priv->bus_clk_rate + freq - 1) / freq;
+ if (scbr > ATMEL_SPI_CSRx_SCBR_MAX)
+ return -EINVAL;
+
+ if (scbr < 1)
+ scbr = 1;
+
+ csrx = ATMEL_SPI_CSRx_SCBR(scbr);
+ csrx |= ATMEL_SPI_CSRx_BITS(ATMEL_SPI_BITS_8);
+
+ if (!(priv->mode & SPI_CPHA))
+ csrx |= ATMEL_SPI_CSRx_NCPHA;
+ if (priv->mode & SPI_CPOL)
+ csrx |= ATMEL_SPI_CSRx_CPOL;
+
+ writel(csrx, ®_base->csr[cs]);
+
+ mode = ATMEL_SPI_MR_MSTR |
+ ATMEL_SPI_MR_MODFDIS |
+ ATMEL_SPI_MR_WDRBT |
+ ATMEL_SPI_MR_PCS(~(1 << cs));
+
+ writel(mode, ®_base->mr);
+
+ writel(ATMEL_SPI_CR_SPIEN, ®_base->cr);
+
+ return 0;
+}
+
+static int atmel_spi_release_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct atmel_spi_platdata *bus_plat = dev_get_platdata(bus);
+
+ writel(ATMEL_SPI_CR_SPIDIS, &bus_plat->regs->cr);
+
+ return 0;
+}
+
+static void atmel_spi_cs_activate(struct udevice *dev)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct atmel_spi_priv *priv = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+ u32 cs = slave_plat->cs;
+
+ dm_gpio_set_value(&priv->cs_gpios[cs], 0);
+}
+
+static void atmel_spi_cs_deactivate(struct udevice *dev)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct atmel_spi_priv *priv = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+ u32 cs = slave_plat->cs;
+
+ dm_gpio_set_value(&priv->cs_gpios[cs], 1);
+}
+
+static int atmel_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct atmel_spi_platdata *bus_plat = dev_get_platdata(bus);
+ struct at91_spi *reg_base = bus_plat->regs;
+
+ u32 len_tx, len_rx, len;
+ u32 status;
+ const u8 *txp = dout;
+ u8 *rxp = din;
+ u8 value;
+
+ if (bitlen == 0)
+ goto out;
+
+ /*
+ * The controller can do non-multiple-of-8 bit
+ * transfers, but this driver currently doesn't support it.
+ *
+ * It's also not clear how such transfers are supposed to be
+ * represented as a stream of bytes...this is a limitation of
+ * the current SPI interface.
+ */
+ if (bitlen % 8) {
+ /* Errors always terminate an ongoing transfer */
+ flags |= SPI_XFER_END;
+ goto out;
+ }
+
+ len = bitlen / 8;
+
+ /*
+ * The controller can do automatic CS control, but it is
+ * somewhat quirky, and it doesn't really buy us much anyway
+ * in the context of U-Boot.
+ */
+ if (flags & SPI_XFER_BEGIN) {
+ atmel_spi_cs_activate(dev);
+
+ /*
+ * sometimes the RDR is not empty when we get here,
+ * in theory that should not happen, but it DOES happen.
+ * Read it here to be on the safe side.
+ * That also clears the OVRES flag. Required if the
+ * following loop exits due to OVRES!
+ */
+ readl(®_base->rdr);
+ }
+
+ for (len_tx = 0, len_rx = 0; len_rx < len; ) {
+ status = readl(®_base->sr);
+
+ if (status & ATMEL_SPI_SR_OVRES)
+ return -1;
+
+ if ((len_tx < len) && (status & ATMEL_SPI_SR_TDRE)) {
+ if (txp)
+ value = *txp++;
+ else
+ value = 0;
+ writel(value, ®_base->tdr);
+ len_tx++;
+ }
+
+ if (status & ATMEL_SPI_SR_RDRF) {
+ value = readl(®_base->rdr);
+ if (rxp)
+ *rxp++ = value;
+ len_rx++;
+ }
+ }
+
+out:
+ if (flags & SPI_XFER_END) {
+ /*
+ * Wait until the transfer is completely done before
+ * we deactivate CS.
+ */
+ wait_for_bit(__func__, ®_base->sr,
+ ATMEL_SPI_SR_TXEMPTY, true, 1000, false);
+
+ atmel_spi_cs_deactivate(dev);
+ }
+
+ return 0;
+}
+
+static int atmel_spi_set_speed(struct udevice *bus, uint speed)
+{
+ struct atmel_spi_priv *priv = dev_get_priv(bus);
+
+ priv->freq = speed;
+
+ return 0;
+}
+
+static int atmel_spi_set_mode(struct udevice *bus, uint mode)
+{
+ struct atmel_spi_priv *priv = dev_get_priv(bus);
+
+ priv->mode = mode;
+
+ return 0;
+}
+
+static const struct dm_spi_ops atmel_spi_ops = {
+ .claim_bus = atmel_spi_claim_bus,
+ .release_bus = atmel_spi_release_bus,
+ .xfer = atmel_spi_xfer,
+ .set_speed = atmel_spi_set_speed,
+ .set_mode = atmel_spi_set_mode,
+ /*
+ * cs_info is not needed, since we require all chip selects to be
+ * in the device tree explicitly
+ */
+};
+
+static int atmel_spi_enable_clk(struct udevice *bus)
+{
+ struct atmel_spi_priv *priv = dev_get_priv(bus);
+ struct clk clk;
+ ulong clk_rate;
+ int ret;
+
+ ret = clk_get_by_index(bus, 0, &clk);
+ if (ret)
+ return -EINVAL;
+
+ ret = clk_enable(&clk);
+ if (ret)
+ return ret;
+
+ clk_rate = clk_get_rate(&clk);
+ if (!clk_rate)
+ return -EINVAL;
+
+ priv->bus_clk_rate = clk_rate;
+
+ clk_free(&clk);
+
+ return 0;
+}
+
+static int atmel_spi_probe(struct udevice *bus)
+{
+ struct atmel_spi_platdata *bus_plat = dev_get_platdata(bus);
+ struct atmel_spi_priv *priv = dev_get_priv(bus);
+ int i, ret;
+
+ ret = atmel_spi_enable_clk(bus);
+ if (ret)
+ return ret;
+
+ bus_plat->regs = (struct at91_spi *)dev_get_addr(bus);
+
+ ret = gpio_request_list_by_name(bus, "cs-gpios", priv->cs_gpios,
+ ARRAY_SIZE(priv->cs_gpios), 0);
+ if (ret < 0) {
+ error("Can't get %s gpios! Error: %d", bus->name, ret);
+ return ret;
+ }
+
+ for(i = 0; i < ARRAY_SIZE(priv->cs_gpios); i++) {
+ dm_gpio_set_dir_flags(&priv->cs_gpios[i],
+ GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+ }
+
+ writel(ATMEL_SPI_CR_SWRST, &bus_plat->regs->cr);
+
+ return 0;
+}
+
+static const struct udevice_id atmel_spi_ids[] = {
+ { .compatible = "atmel,at91rm9200-spi" },
+ { }
+};
+
+U_BOOT_DRIVER(atmel_spi) = {
+ .name = "atmel_spi",
+ .id = UCLASS_SPI,
+ .of_match = atmel_spi_ids,
+ .ops = &atmel_spi_ops,
+ .platdata_auto_alloc_size = sizeof(struct atmel_spi_platdata),
+ .priv_auto_alloc_size = sizeof(struct atmel_spi_priv),
+ .probe = atmel_spi_probe,
+};
+#endif