common/Kconfig: Change the default BOOTDELAY to 2

[oweals/u-boot.git] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2f8cf19613a741a96bccdfe379146e608b8745c7..aca385d5e59f69367fb62e5fca00e708a436b6bc 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -23,6 +23,15 @@ config ALTERA_SPI
          IP core. Please find details on the "Embedded Peripherals IP
          User Guide" of Altera.
 
+config ATH79_SPI
+       bool "Atheros SPI driver"
+       depends on ARCH_ATH79
+       help
+         Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used
+         to access SPI NOR flash and other SPI peripherals. This driver
+         uses driver model and requires a device tree binding to operate.
+         please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
+
 config CADENCE_QSPI
        bool "Cadence QSPI driver"
        help
@@ -66,6 +75,14 @@ config ICH_SPI
          access the SPI NOR flash on platforms embedding this Intel
          ICH IP core.
 
+config PIC32_SPI
+       bool "Microchip PIC32 SPI driver"
+       depends on MACH_PIC32
+       help
+         Enable the Microchip PIC32 SPI driver. This driver can be used
+         to access the SPI NOR flash, MMC-over-SPI on platforms based on
+         Microchip PIC32 family devices.
+
 config ROCKCHIP_SPI
        bool "Rockchip SPI driver"
        help
@@ -123,6 +140,13 @@ config TEGRA20_SLINK
          be used to access the SPI NOR flash on platforms embedding this
          nVidia Tegra20/Tegra30 IP cores.
 
+config TEGRA210_QSPI
+       bool "nVidia Tegra210 QSPI driver"
+       help
+         Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver
+         be used to access SPI chips on platforms embedding this
+         NVIDIA Tegra210 IP core.
+
 config XILINX_SPI
        bool "Xilinx SPI driver"
        help
@@ -133,12 +157,28 @@ config XILINX_SPI
 
 config ZYNQ_SPI
        bool "Zynq SPI driver"
-       depends on ARCH_ZYNQ || TARGET_XILINX_ZYNQMP
+       depends on ARCH_ZYNQ || ARCH_ZYNQMP
        help
          Enable the Zynq SPI driver. This driver can be used to
          access the SPI NOR flash on platforms embedding this Zynq
          SPI IP core.
 
+config ZYNQ_QSPI
+       bool "Zynq QSPI driver"
+       depends on ARCH_ZYNQ
+       help
+         Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Zynq QSPI IP core. This IP is used to connect the flash in
+         4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
+
+config OMAP3_SPI
+       bool "McSPI driver for OMAP"
+       help
+         SPI master controller for OMAP24XX and later Multichannel SPI
+         (McSPI). This driver be used to access SPI chips on platforms
+         embedding this OMAP3 McSPI IP core.
+
 endif # if DM_SPI
 
 config FSL_ESPI