nds32: spi: Support spi dm driver.

[oweals/u-boot.git] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b7fd8e53a2f62d6cd1f7aefa91f82e89c7fe5aea..88da9a4c8e7159b7be04e701a35708460dd9044d 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -32,6 +32,14 @@ config ATH79_SPI
          uses driver model and requires a device tree binding to operate.
          please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
 
+config ATMEL_SPI
+       bool "Atmel SPI driver"
+       depends on ARCH_AT91
+       help
+         This enables driver for the Atmel SPI Controller, present on
+         many AT91 (ARM) chips. This driver can be used to access
+         the SPI Flash, such as AT25DF321.
+
 config CADENCE_QSPI
        bool "Cadence QSPI driver"
        help
@@ -61,13 +69,6 @@ config FSL_DSPI
          this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
          use this driver.
 
-config FSL_QSPI
-       bool "Freescale QSPI driver"
-       help
-         Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
-         used to access the SPI NOR flash on platforms embedding this
-         Freescale IP core.
-
 config ICH_SPI
        bool "Intel ICH SPI driver"
        help
@@ -75,6 +76,21 @@ config ICH_SPI
          access the SPI NOR flash on platforms embedding this Intel
          ICH IP core.
 
+config MVEBU_A3700_SPI
+       bool "Marvell Armada 3700 SPI driver"
+       help
+         Enable the Marvell Armada 3700 SPI driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Marvell IP core.
+
+config PIC32_SPI
+       bool "Microchip PIC32 SPI driver"
+       depends on MACH_PIC32
+       help
+         Enable the Microchip PIC32 SPI driver. This driver can be used
+         to access the SPI NOR flash, MMC-over-SPI on platforms based on
+         Microchip PIC32 family devices.
+
 config ROCKCHIP_SPI
        bool "Rockchip SPI driver"
        help
@@ -108,6 +124,14 @@ config SANDBOX_SPI
                };
          };
 
+config STM32_QSPI
+       bool "STM32F7 QSPI driver"
+       depends on STM32F7
+       help
+         Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash chips on platforms embedding
+         this ST IP core.
+
 config TEGRA114_SPI
        bool "nVidia Tegra114 SPI driver"
        help
@@ -164,15 +188,14 @@ config ZYNQ_QSPI
          Zynq QSPI IP core. This IP is used to connect the flash in
          4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
 
-config OMAP3_SPI
-       bool "McSPI driver for OMAP"
-       help
-         SPI master controller for OMAP24XX and later Multichannel SPI
-         (McSPI). This driver be used to access SPI chips on platforms
-         embedding this OMAP3 McSPI IP core.
-
 endif # if DM_SPI
 
+config SOFT_SPI
+       bool "Soft SPI driver"
+       help
+        Enable Soft SPI driver. This driver is to use GPIO simulate
+        the SPI protocol.
+
 config FSL_ESPI
        bool "Freescale eSPI driver"
        help
@@ -180,10 +203,37 @@ config FSL_ESPI
          access the SPI interface and SPI NOR flash on platforms embedding
          this Freescale eSPI IP core.
 
+config FSL_QSPI
+       bool "Freescale QSPI driver"
+       help
+         Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Freescale IP core.
+
+config NDS_AE3XX_SPI
+       bool "Andestech AE3XX SPI driver"
+       help
+         Enable the Andestech AE3XX SPI driver. This driver can be
+         used to access the SPI flash on platforms embedding this
+         Andestech IP core.
+
 config TI_QSPI
        bool "TI QSPI driver"
        help
          Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
          This driver support spi flash single, quad and memory reads.
 
+config MPC8XX_SPI
+       bool "MPC8XX SPI Driver"
+       depends on 8xx
+       help
+         Enable support for SPI on MPC8XX
+
+config OMAP3_SPI
+       bool "McSPI driver for OMAP"
+       help
+         SPI master controller for OMAP24XX and later Multichannel SPI
+         (McSPI). This driver be used to access SPI chips on platforms
+         embedding this OMAP3 McSPI IP core.
+
 endmenu # menu "SPI Support"