-menu "SPI Support"
+menuconfig SPI
+ bool "SPI Support"
+
+if SPI
config DM_SPI
bool "Enable Driver Model for SPI drivers"
if DM_SPI
+config SPI_MEM
+ bool "SPI memory extension"
+ help
+ Enable this option if you want to enable the SPI memory extension.
+ This extension is meant to simplify interaction with SPI memories
+ by providing an high-level interface to send memory-like commands.
+
config ALTERA_SPI
bool "Altera SPI driver"
help
IP core. Please find details on the "Embedded Peripherals IP
User Guide" of Altera.
+config ATCSPI200_SPI
+ bool "Andestech ATCSPI200 SPI driver"
+ help
+ Enable the Andestech ATCSPI200 SPI driver. This driver can be
+ used to access the SPI flash on AE3XX and AE250 platforms embedding
+ this Andestech IP core.
+
config ATH79_SPI
bool "Atheros SPI driver"
depends on ARCH_ATH79
config ATMEL_SPI
bool "Atmel SPI driver"
- depends on ARCH_AT91
+ default y if ARCH_AT91
help
This enables driver for the Atmel SPI Controller, present on
many AT91 (ARM) chips. This driver can be used to access
access the SPI NOR flash on platforms embedding these Broadcom
SPI cores.
+config BCMSTB_SPI
+ bool "BCMSTB SPI driver"
+ help
+ Enable the Broadcom set-top box SPI driver. This driver can
+ be used to access the SPI flash on platforms embedding this
+ Broadcom SPI core.
+
config CADENCE_QSPI
bool "Cadence QSPI driver"
help
access the SPI NOR flash on platforms embedding this Intel
ICH IP core.
+config MT7621_SPI
+ bool "MediaTek MT7621 SPI driver"
+ depends on ARCH_MT7620
+ help
+ Enable the MT7621 SPI driver. This driver can be used to access
+ the SPI NOR flash on platforms embedding this Ralink / MediaTek
+ SPI core, like MT7621/7628/7688.
+
config MVEBU_A3700_SPI
bool "Marvell Armada 3700 SPI driver"
+ select CLK_ARMADA_3720
help
Enable the Marvell Armada 3700 SPI driver. This driver can be
used to access the SPI NOR flash on platforms embedding this
to access the SPI NOR flash, MMC-over-SPI on platforms based on
Microchip PIC32 family devices.
+config PL022_SPI
+ bool "ARM AMBA PL022 SSP controller driver"
+ depends on ARM
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
+ controller. If you have an embedded system with an AMBA(R)
+ bus and a PL022 controller, say Y or M here.
+
+config RENESAS_RPC_SPI
+ bool "Renesas RPC SPI driver"
+ depends on RCAR_GEN3
+ help
+ Enable the Renesas RPC SPI driver, used to access SPI NOR flash
+ on Renesas RCar Gen3 SoCs. This uses driver model and requires a
+ device tree binding to operate.
+
config ROCKCHIP_SPI
bool "Rockchip SPI driver"
help
used to access the SPI NOR flash chips on platforms embedding
this ST IP core.
+config SUN4I_SPI
+ bool "Allwinner A10 SoCs SPI controller"
+ help
+ SPI driver for Allwinner sun4i, sun5i and sun7i SoCs
+
config TEGRA114_SPI
bool "nVidia Tegra114 SPI driver"
help
Zynq QSPI IP core. This IP is used to connect the flash in
4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
+config ZYNQMP_GQSPI
+ bool "Configure ZynqMP Generic QSPI"
+ depends on ARCH_ZYNQMP
+ help
+ This option is used to enable ZynqMP QSPI controller driver which
+ is used to communicate with qspi flash devices.
+
endif # if DM_SPI
config SOFT_SPI
Enable Soft SPI driver. This driver is to use GPIO simulate
the SPI protocol.
+config CF_SPI
+ bool "ColdFire SPI driver"
+ help
+ Enable the ColdFire SPI driver. This driver can be used on
+ some m68k SoCs.
+
config FSL_ESPI
bool "Freescale eSPI driver"
help
used to access the SPI NOR flash on platforms embedding this
Freescale IP core.
-config ATCSPI200_SPI
- bool "Andestech ATCSPI200 SPI driver"
- help
- Enable the Andestech ATCSPI200 SPI driver. This driver can be
- used to access the SPI flash on AE3XX and AE250 platforms embedding
- this Andestech IP core.
-
config DAVINCI_SPI
bool "Davinci & Keystone SPI driver"
depends on ARCH_DAVINCI || ARCH_KEYSTONE
Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
This driver support spi flash single, quad and memory reads.
+config KIRKWOOD_SPI
+ bool "Marvell Kirkwood SPI Driver"
+ help
+ Enable support for SPI on various Marvell SoCs, such as
+ Kirkwood and Armada 375.
+
+config LPC32XX_SSP
+ bool "LPC32XX SPI Driver"
+ help
+ Enable support for SPI on LPC32xx
+
config MPC8XX_SPI
bool "MPC8XX SPI Driver"
- depends on 8xx
+ depends on MPC8xx
help
Enable support for SPI on MPC8XX
+config MPC8XXX_SPI
+ bool "MPC8XXX SPI Driver"
+ help
+ Enable support for SPI on the MPC8XXX PowerPC SoCs.
+
+config MXC_SPI
+ bool "MXC SPI Driver"
+ help
+ Enable the MXC SPI controller driver. This driver can be used
+ on various i.MX SoCs such as i.MX31/35/51/6/7.
+
+config MXS_SPI
+ bool "MXS SPI Driver"
+ help
+ Enable the MXS SPI controller driver. This driver can be used
+ on the i.MX23 and i.MX28 SoCs.
+
config OMAP3_SPI
bool "McSPI driver for OMAP"
help
(McSPI). This driver be used to access SPI chips on platforms
embedding this OMAP3 McSPI IP core.
-endmenu # menu "SPI Support"
+endif # menu "SPI Support"