--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * max98088.c -- MAX98088 ALSA SoC Audio driver
+ *
+ * Copyright 2010 Maxim Integrated Products
+ *
+ * Modified for U-Boot by Chih-Chung Chang (chihchung@chromium.org),
+ * following the changes made in max98095.c
+ */
+
+#include <common.h>
+#include <audio_codec.h>
+#include <div64.h>
+#include <dm.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include "maxim_codec.h"
+#include "max98088.h"
+
+/* codec mclk clock divider coefficients. Index 0 is reserved. */
+static const int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000,
+ 44100, 48000, 88200, 96000};
+
+/*
+ * codec mclk clock divider coefficients based on sampling rate
+ *
+ * @param rate sampling rate
+ * @param value address of indexvalue to be stored
+ *
+ * @return 0 for success or negative error code.
+ */
+static int rate_value(int rate, u8 *value)
+{
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
+ if (rate_table[i] >= rate) {
+ *value = i;
+ return 0;
+ }
+ }
+ *value = 1;
+
+ return -EINVAL;
+}
+
+/*
+ * Sets hw params for max98088
+ *
+ * @priv: max98088 information pointer
+ * @rate: Sampling rate
+ * @bits_per_sample: Bits per sample
+ *
+ * @return -EIO for error, 0 for success.
+ */
+int max98088_hw_params(struct maxim_priv *priv, unsigned int rate,
+ unsigned int bits_per_sample)
+{
+ int error;
+ u8 regval;
+
+ switch (bits_per_sample) {
+ case 16:
+ error = maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
+ M98088_DAI_WS, 0);
+ break;
+ case 24:
+ error = maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
+ M98088_DAI_WS, M98088_DAI_WS);
+ break;
+ default:
+ debug("%s: Illegal bits per sample %d.\n",
+ __func__, bits_per_sample);
+ return -EINVAL;
+ }
+
+ error |= maxim_bic_or(priv, M98088_REG_PWR_SYS, M98088_SHDNRUN, 0);
+
+ if (rate_value(rate, ®val)) {
+ debug("%s: Failed to set sample rate to %d.\n",
+ __func__, rate);
+ return -EIO;
+ }
+
+ error |= maxim_bic_or(priv, M98088_REG_DAI1_CLKMODE,
+ M98088_CLKMODE_MASK, regval << 4);
+ priv->rate = rate;
+
+ /* Update sample rate mode */
+ if (rate < 50000)
+ error |= maxim_bic_or(priv, M98088_REG_DAI1_FILTERS,
+ M98088_DAI_DHF, 0);
+ else
+ error |= maxim_bic_or(priv, M98088_REG_DAI1_FILTERS,
+ M98088_DAI_DHF, M98088_DAI_DHF);
+
+ error |= maxim_bic_or(priv, M98088_REG_PWR_SYS, M98088_SHDNRUN,
+ M98088_SHDNRUN);
+
+ if (error < 0) {
+ debug("%s: Error setting hardware params.\n", __func__);
+ return -EIO;
+ }
+ priv->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Configures Audio interface system clock for the given frequency
+ *
+ * @priv: max98088 information
+ * @freq: Sampling frequency in Hz
+ *
+ * @return -EIO for error, 0 for success.
+ */
+int max98088_set_sysclk(struct maxim_priv *priv, unsigned int freq)
+{
+ int error = 0;
+ u8 pwr;
+
+ /* Requested clock frequency is already setup */
+ if (freq == priv->sysclk)
+ return 0;
+
+ /*
+ * Setup clocks for slave mode, and using the PLL
+ * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
+ * 0x02 (when master clk is 20MHz to 30MHz)..
+ */
+ if (freq >= 10000000 && freq < 20000000) {
+ error = maxim_i2c_write(priv, M98088_REG_SYS_CLK, 0x10);
+ } else if ((freq >= 20000000) && (freq < 30000000)) {
+ error = maxim_i2c_write(priv, M98088_REG_SYS_CLK, 0x20);
+ } else {
+ debug("%s: Invalid master clock frequency\n", __func__);
+ return -EIO;
+ }
+
+ error |= maxim_i2c_read(priv, M98088_REG_PWR_SYS, &pwr);
+ if (pwr & M98088_SHDNRUN) {
+ error |= maxim_bic_or(priv, M98088_REG_PWR_SYS,
+ M98088_SHDNRUN, 0);
+ error |= maxim_bic_or(priv, M98088_REG_PWR_SYS,
+ M98088_SHDNRUN, M98088_SHDNRUN);
+ }
+
+ debug("%s: Clock at %uHz\n", __func__, freq);
+ if (error < 0)
+ return -EIO;
+
+ priv->sysclk = freq;
+
+ return 0;
+}
+
+/*
+ * Sets Max98090 I2S format
+ *
+ * @priv: max98088 information
+ * @fmt: i2S format - supports a subset of the options defined in i2s.h.
+ *
+ * @return -EIO for error, 0 for success.
+ */
+int max98088_set_fmt(struct maxim_priv *priv, int fmt)
+{
+ u8 reg15val;
+ u8 reg14val = 0;
+ int error = 0;
+
+ if (fmt == priv->fmt)
+ return 0;
+
+ priv->fmt = fmt;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ /* Slave mode PLL */
+ error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLKCFG_HI,
+ 0x80);
+ error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLKCFG_LO,
+ 0x00);
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* Set to master mode */
+ reg14val |= M98088_DAI_MAS;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ case SND_SOC_DAIFMT_CBM_CFS:
+ default:
+ debug("%s: Clock mode unsupported\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ reg14val |= M98088_DAI_DLY;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ break;
+ default:
+ debug("%s: Unrecognized format.\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ reg14val |= M98088_DAI_WCI;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ reg14val |= M98088_DAI_BCI;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ reg14val |= M98088_DAI_BCI | M98088_DAI_WCI;
+ break;
+ default:
+ debug("%s: Unrecognized inversion settings.\n", __func__);
+ return -EINVAL;
+ }
+
+ error |= maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
+ M98088_DAI_MAS | M98088_DAI_DLY | M98088_DAI_BCI |
+ M98088_DAI_WCI, reg14val);
+ reg15val = M98088_DAI_BSEL64;
+ error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLOCK, reg15val);
+
+ if (error < 0) {
+ debug("%s: Error setting i2s format.\n", __func__);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * max98088_reset() - reset the audio codec
+ *
+ * @priv: max98088 information
+ * @return -EIO for error, 0 for success.
+ */
+static int max98088_reset(struct maxim_priv *priv)
+{
+ int ret, i;
+ u8 val;
+
+ /*
+ * Reset to hardware default for registers, as there is not a soft
+ * reset hardware control register.
+ */
+ for (i = M98088_REG_IRQ_ENABLE; i <= M98088_REG_PWR_SYS; i++) {
+ switch (i) {
+ case M98088_REG_BIAS_CNTL:
+ val = 0xf0;
+ break;
+ case M98088_REG_DAC_BIAS2:
+ val = 0x0f;
+ break;
+ default:
+ val = 0;
+ }
+ ret = maxim_i2c_write(priv, i, val);
+ if (ret < 0) {
+ debug("%s: Failed to reset: %d\n", __func__, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * max98088_device_init() - Initialise max98088 codec device
+ *
+ * @priv: max98088 information
+ *
+ * @return -EIO for error, 0 for success.
+ */
+static int max98088_device_init(struct maxim_priv *priv)
+{
+ unsigned char id;
+ int error = 0;
+
+ /* Enable codec clock */
+ set_xclkout();
+
+ /* reset the codec, the DSP core, and disable all interrupts */
+ error = max98088_reset(priv);
+ if (error != 0) {
+ debug("Reset\n");
+ return error;
+ }
+
+ /* initialize private data */
+ priv->sysclk = -1U;
+ priv->rate = -1U;
+ priv->fmt = -1U;
+
+ error = maxim_i2c_read(priv, M98088_REG_REV_ID, &id);
+ if (error < 0) {
+ debug("%s: Failure reading hardware revision: %d\n",
+ __func__, id);
+ return -EIO;
+ }
+ debug("%s: Hardware revision: %d\n", __func__, id);
+
+ return 0;
+}
+
+static int max98088_setup_interface(struct maxim_priv *priv)
+{
+ int error;
+
+ /* Reading interrupt status to clear them */
+ error = maxim_i2c_write(priv, M98088_REG_PWR_SYS, M98088_PWRSV);
+ error |= maxim_i2c_write(priv, M98088_REG_IRQ_ENABLE, 0x00);
+
+ /*
+ * initialize registers to hardware default configuring audio
+ * interface2 to DAI1
+ */
+ error |= maxim_i2c_write(priv, M98088_REG_MIX_DAC,
+ M98088_DAI1L_TO_DACL | M98088_DAI1R_TO_DACR);
+ error |= maxim_i2c_write(priv, M98088_REG_BIAS_CNTL, 0xF0);
+ error |= maxim_i2c_write(priv, M98088_REG_DAC_BIAS2, 0x0F);
+ error |= maxim_i2c_write(priv, M98088_REG_DAI1_IOCFG,
+ M98088_S2NORMAL | M98088_SDATA);
+
+ /*
+ * route DACL and DACR output to headphone and speakers
+ * Ordering: DACL, DACR, DACL, DACR
+ */
+ error |= maxim_i2c_write(priv, M98088_REG_MIX_SPK_LEFT, 1);
+ error |= maxim_i2c_write(priv, M98088_REG_MIX_SPK_RIGHT, 1);
+ error |= maxim_i2c_write(priv, M98088_REG_MIX_HP_LEFT, 1);
+ error |= maxim_i2c_write(priv, M98088_REG_MIX_HP_RIGHT, 1);
+
+ /* set volume: -12db */
+ error |= maxim_i2c_write(priv, M98088_REG_LVL_SPK_L, 0x0f);
+ error |= maxim_i2c_write(priv, M98088_REG_LVL_SPK_R, 0x0f);
+
+ /* set volume: -22db */
+ error |= maxim_i2c_write(priv, M98088_REG_LVL_HP_L, 0x0d);
+ error |= maxim_i2c_write(priv, M98088_REG_LVL_HP_R, 0x0d);
+
+ /* power enable */
+ error |= maxim_i2c_write(priv, M98088_REG_PWR_EN_OUT,
+ M98088_HPLEN | M98088_HPREN | M98088_SPLEN |
+ M98088_SPREN | M98088_DALEN | M98088_DAREN);
+ if (error < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int max98088_do_init(struct maxim_priv *priv, int sampling_rate,
+ int mclk_freq, int bits_per_sample)
+{
+ int ret = 0;
+
+ ret = max98088_setup_interface(priv);
+ if (ret < 0) {
+ debug("%s: max98088 setup interface failed\n", __func__);
+ return ret;
+ }
+
+ ret = max98088_set_sysclk(priv, mclk_freq);
+ if (ret < 0) {
+ debug("%s: max98088 codec set sys clock failed\n", __func__);
+ return ret;
+ }
+
+ ret = max98088_hw_params(priv, sampling_rate, bits_per_sample);
+
+ if (ret == 0) {
+ ret = max98088_set_fmt(priv, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+ }
+
+ return ret;
+}
+
+static int max98088_set_params(struct udevice *dev, int interface, int rate,
+ int mclk_freq, int bits_per_sample,
+ uint channels)
+{
+ struct maxim_priv *priv = dev_get_priv(dev);
+
+ return max98088_do_init(priv, rate, mclk_freq, bits_per_sample);
+}
+
+static int max98088_probe(struct udevice *dev)
+{
+ struct maxim_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ priv->dev = dev;
+ ret = max98088_device_init(priv);
+ if (ret < 0) {
+ debug("%s: max98088 codec chip init failed\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct audio_codec_ops max98088_ops = {
+ .set_params = max98088_set_params,
+};
+
+static const struct udevice_id max98088_ids[] = {
+ { .compatible = "maxim,max98088" },
+ { }
+};
+
+U_BOOT_DRIVER(max98088) = {
+ .name = "max98088",
+ .id = UCLASS_AUDIO_CODEC,
+ .of_match = max98088_ids,
+ .probe = max98088_probe,
+ .ops = &max98088_ops,
+ .priv_auto_alloc_size = sizeof(struct maxim_priv),
+};
projects / oweals / u-boot.git / blobdiff