Merge branch '2019-12-02-master-imports'
[oweals/u-boot.git] / drivers / sound / Kconfig
index 759a10fcc39a5e54c78fb37c8bc3128bdfb79133..4ebc719be2b85ddabe4831580839325e09b3e118 100644 (file)
@@ -1,3 +1,5 @@
+menu "Sound support"
+
 config SOUND
        bool "Enable sound support"
        help
@@ -18,3 +20,114 @@ config I2S
          SoC to the audio codec. This option enables sound support using
          I2S. It calls either of the two supported codecs (no use is made
          of driver model at present).
+
+config I2S_ROCKCHIP
+       bool "Enable I2S support for Rockchip SoCs"
+       depends on I2S
+       help
+         Rockchip SoCs support an I2S interface for sending audio data to an
+         audio codec. This option enables support for this, using one of the
+         available audio codec drivers. This driver does not make use of
+         DMA, but writes each word directly to the hardware.
+
+config I2S_SAMSUNG
+       bool "Enable I2C support for Samsung SoCs"
+       depends on I2S
+       help
+         Samsung Exynos SoCs support an I2S interface for sending audio
+         data to an audio codec. This option enables support for this,
+         using one of the available audio codec drivers. Enabling this
+         option provides an implementation for sound_init() and
+         sound_play().
+
+config SOUND_I8254
+       bool "Intel i8254 timer / beeper"
+       depends on SOUND
+       help
+         This enables support for a beeper that uses the i8254 timer chip.
+         This can emit beeps at a fixed frequency. It is possible to control
+         the length of the beeps, by turning a beep on, waiting for a period
+         of time, then turning it off.
+
+         This is quite an old feature, called PIT (Programmable Interval
+         Timer), but is nonetheless still available on modern x86 machines.
+
+config SOUND_INTEL_HDA
+       bool "Intel HDA audio codec"
+       depends on SOUND
+       help
+         Most Intel chips have an HDA (High-definition audio) codec which can
+         be used by U-Boot to play simple beeps. This is also sometimes called
+         Azalia which was the development code-name. It requires setup
+         information in the device tree (see intel-hda.txt).
+
+config SOUND_IVYBRIDGE
+       bool "Intel Ivybridge sound support"
+       depends on SOUND
+       select SOUND_INTEL_HDA
+       help
+         Enable sound output on supported Intel Ivybridge-based boards. This
+         driver uses Intel's High-definition Audio (HDA) architecture,
+         sometimes called Azalia. The audio codec is detected using a
+         semi-automatic mechanism.
+
+config I2S_TEGRA
+       bool "Enable I2S support for Nvidia Tegra SoCs"
+       depends on I2S
+       select TEGRA124_DMA
+       help
+         Nvidia Tegra SoCs support several I2S interfaces for sending audio
+         data to an audio codec. This option enables support for this,
+         using one of the available audio codec drivers.
+
+config SOUND_MAX98088
+       bool "Support Maxim max98088 audio codec"
+       depends on I2S
+       help
+         Enable the max98088 audio codec. This is connected via I2S for
+         audio data and I2C for codec control. At present it only works
+         with the Samsung I2S driver.
+
+config SOUND_MAX98090
+       bool "Support Maxim max98090 audio codec"
+       depends on I2S
+       help
+         Enable the max98090 audio codec. This is connected via I2S for
+         audio data and I2C for codec control. At present it only works
+         with the Samsung I2S driver.
+
+config SOUND_MAX98095
+       bool "Support Maxim max98095 audio codec"
+       depends on I2S
+       help
+         Enable the max98095 audio codec. This is connected via I2S for
+         audio data and I2C for codec control. At present it only works
+         with the Samsung I2S driver.
+
+config SOUND_RT5677
+       bool "Support Realtek RT5677 audio codec"
+       depends on SOUND
+       help
+         Enable the Realtek RT5677 audio codec. This is an I2S device used on
+         some Chromebooks from around 2015 ('auron'). It is configured using
+         an I2C interface and supports multiple sound inputs and outputs,
+         including digital microphones.
+
+config SOUND_SANDBOX
+       bool "Support sandbox emulated audio codec"
+       depends on SANDBOX && SOUND
+       help
+         U-Boot sandbox can emulate a sound device using SDL, playing the
+         sound on the host machine. This option implements the sound_init()
+         and sound_play() functions for sandbox. Note that you must install
+         the SDL libraries for this to work.
+
+config SOUND_WM8994
+       bool "Support Wolfson Micro wm8994 audio codec"
+       depends on I2S_SAMSUNG
+       help
+         Enable the wm8994 audio codec. This is connected via I2S for
+         audio data and I2C for codec control. At present it only works
+         with the Samsung I2S driver.
+
+endmenu