+// SPDX-License-Identifier: GPL-2.0+
/*
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
-#include <asm/io.h>
+#include <reset.h>
#include <serial.h>
+#include <watchdog.h>
+#include <asm/io.h>
#include <asm/arch/stm32.h>
-#include <dm/platform_data/serial_stm32.h>
-
-struct stm32_usart {
- u32 sr;
- u32 dr;
- u32 brr;
- u32 cr1;
- u32 cr2;
- u32 cr3;
- u32 gtpr;
-};
-
-#define USART_CR1_RE (1 << 2)
-#define USART_CR1_TE (1 << 3)
-#define USART_CR1_UE (1 << 13)
+#include "serial_stm32.h"
-#define USART_SR_FLAG_RXNE (1 << 5)
-#define USART_SR_FLAG_TXE (1 << 7)
+static void _stm32_serial_setbrg(fdt_addr_t base,
+ struct stm32_uart_info *uart_info,
+ u32 clock_rate,
+ int baudrate)
+{
+ bool stm32f4 = uart_info->stm32f4;
+ u32 int_div, mantissa, fraction, oversampling;
-#define USART_BRR_F_MASK 0xF
-#define USART_BRR_M_SHIFT 4
-#define USART_BRR_M_MASK 0xFFF0
+ int_div = DIV_ROUND_CLOSEST(clock_rate, baudrate);
-DECLARE_GLOBAL_DATA_PTR;
+ if (int_div < 16) {
+ oversampling = 8;
+ setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_OVER8);
+ } else {
+ oversampling = 16;
+ clrbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_OVER8);
+ }
-#define MAX_SERIAL_PORTS 4
+ mantissa = (int_div / oversampling) << USART_BRR_M_SHIFT;
+ fraction = int_div % oversampling;
-/*
- * RCC USART specific definitions
- */
-#define RCC_ENR_USART1EN (1 << 4)
-#define RCC_ENR_USART2EN (1 << 17)
-#define RCC_ENR_USART3EN (1 << 18)
-#define RCC_ENR_USART6EN (1 << 5)
-
-/* Array used to figure out which RCC bit needs to be set */
-static const unsigned long usart_port_rcc_pairs[MAX_SERIAL_PORTS][2] = {
- { STM32_USART1_BASE, RCC_ENR_USART1EN },
- { STM32_USART2_BASE, RCC_ENR_USART2EN },
- { STM32_USART3_BASE, RCC_ENR_USART3EN },
- { STM32_USART6_BASE, RCC_ENR_USART6EN }
-};
+ writel(mantissa | fraction, base + BRR_OFFSET(stm32f4));
+}
static int stm32_serial_setbrg(struct udevice *dev, int baudrate)
{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
- u32 clock, int_div, frac_div, tmp;
-
- if (((u32)usart & STM32_BUS_MASK) == STM32_APB1PERIPH_BASE)
- clock = clock_get(CLOCK_APB1);
- else if (((u32)usart & STM32_BUS_MASK) == STM32_APB2PERIPH_BASE)
- clock = clock_get(CLOCK_APB2);
- else
- return -EINVAL;
+ struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
- int_div = (25 * clock) / (4 * baudrate);
- tmp = ((int_div / 100) << USART_BRR_M_SHIFT) & USART_BRR_M_MASK;
- frac_div = int_div - (100 * (tmp >> USART_BRR_M_SHIFT));
- tmp |= (((frac_div * 16) + 50) / 100) & USART_BRR_F_MASK;
- writel(tmp, &usart->brr);
+ _stm32_serial_setbrg(plat->base, plat->uart_info,
+ plat->clock_rate, baudrate);
+
+ return 0;
+}
+
+static int stm32_serial_setconfig(struct udevice *dev, uint serial_config)
+{
+ struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
+ bool stm32f4 = plat->uart_info->stm32f4;
+ u8 uart_enable_bit = plat->uart_info->uart_enable_bit;
+ u32 cr1 = plat->base + CR1_OFFSET(stm32f4);
+ u32 config = 0;
+ uint parity = SERIAL_GET_PARITY(serial_config);
+ uint bits = SERIAL_GET_BITS(serial_config);
+ uint stop = SERIAL_GET_STOP(serial_config);
+
+ /*
+ * only parity config is implemented, check if other serial settings
+ * are the default one.
+ * (STM32F4 serial IP didn't support parity setting)
+ */
+ if (bits != SERIAL_8_BITS || stop != SERIAL_ONE_STOP || stm32f4)
+ return -ENOTSUPP; /* not supported in driver*/
+
+ clrbits_le32(cr1, USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit));
+ /* update usart configuration (uart need to be disable)
+ * PCE: parity check enable
+ * PS : '0' : Even / '1' : Odd
+ * M[1:0] = '00' : 8 Data bits
+ * M[1:0] = '01' : 9 Data bits with parity
+ */
+ switch (parity) {
+ default:
+ case SERIAL_PAR_NONE:
+ config = 0;
+ break;
+ case SERIAL_PAR_ODD:
+ config = USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0;
+ break;
+ case SERIAL_PAR_EVEN:
+ config = USART_CR1_PCE | USART_CR1_M0;
+ break;
+ }
+
+ clrsetbits_le32(cr1,
+ USART_CR1_PCE | USART_CR1_PS | USART_CR1_M1 |
+ USART_CR1_M0,
+ config);
+ setbits_le32(cr1, USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit));
return 0;
}
static int stm32_serial_getc(struct udevice *dev)
{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
+ struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
+ bool stm32f4 = plat->uart_info->stm32f4;
+ fdt_addr_t base = plat->base;
+ u32 isr = readl(base + ISR_OFFSET(stm32f4));
- if ((readl(&usart->sr) & USART_SR_FLAG_RXNE) == 0)
+ if ((isr & USART_ISR_RXNE) == 0)
return -EAGAIN;
- return readl(&usart->dr);
+ if (isr & (USART_ISR_PE | USART_ISR_ORE)) {
+ if (!stm32f4)
+ setbits_le32(base + ICR_OFFSET,
+ USART_ICR_PCECF | USART_ICR_ORECF);
+ else
+ readl(base + RDR_OFFSET(stm32f4));
+ return -EIO;
+ }
+
+ return readl(base + RDR_OFFSET(stm32f4));
}
-static int stm32_serial_putc(struct udevice *dev, const char c)
+static int _stm32_serial_putc(fdt_addr_t base,
+ struct stm32_uart_info *uart_info,
+ const char c)
{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
+ bool stm32f4 = uart_info->stm32f4;
- if ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0)
+ if ((readl(base + ISR_OFFSET(stm32f4)) & USART_ISR_TXE) == 0)
return -EAGAIN;
- writel(c, &usart->dr);
+ writel(c, base + TDR_OFFSET(stm32f4));
return 0;
}
+static int stm32_serial_putc(struct udevice *dev, const char c)
+{
+ struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
+
+ return _stm32_serial_putc(plat->base, plat->uart_info, c);
+}
+
static int stm32_serial_pending(struct udevice *dev, bool input)
{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
+ struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
+ bool stm32f4 = plat->uart_info->stm32f4;
+ fdt_addr_t base = plat->base;
if (input)
- return readl(&usart->sr) & USART_SR_FLAG_RXNE ? 1 : 0;
+ return readl(base + ISR_OFFSET(stm32f4)) &
+ USART_ISR_RXNE ? 1 : 0;
else
- return readl(&usart->sr) & USART_SR_FLAG_TXE ? 0 : 1;
+ return readl(base + ISR_OFFSET(stm32f4)) &
+ USART_ISR_TXE ? 0 : 1;
+}
+
+static void _stm32_serial_init(fdt_addr_t base,
+ struct stm32_uart_info *uart_info)
+{
+ bool stm32f4 = uart_info->stm32f4;
+ u8 uart_enable_bit = uart_info->uart_enable_bit;
+
+ /* Disable uart-> enable fifo -> enable uart */
+ clrbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_RE | USART_CR1_TE |
+ BIT(uart_enable_bit));
+ if (uart_info->has_fifo)
+ setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_FIFOEN);
+ setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_RE | USART_CR1_TE |
+ BIT(uart_enable_bit));
}
static int stm32_serial_probe(struct udevice *dev)
{
- struct stm32_serial_platdata *plat = dev->platdata;
- struct stm32_usart *const usart = plat->base;
- int usart_port = -1;
- int i;
-
- for (i = 0; i < MAX_SERIAL_PORTS; i++) {
- if ((u32)usart == usart_port_rcc_pairs[i][0]) {
- usart_port = i;
- break;
- }
+ struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
+ struct clk clk;
+ struct reset_ctl reset;
+ int ret;
+
+ plat->uart_info = (struct stm32_uart_info *)dev_get_driver_data(dev);
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
}
- if (usart_port == -1)
- return -EINVAL;
+ ret = reset_get_by_index(dev, 0, &reset);
+ if (!ret) {
+ reset_assert(&reset);
+ udelay(2);
+ reset_deassert(&reset);
+ }
- if (((u32)usart & STM32_BUS_MASK) == STM32_APB1PERIPH_BASE)
- setbits_le32(&STM32_RCC->apb1enr,
- usart_port_rcc_pairs[usart_port][1]);
- else if (((u32)usart & STM32_BUS_MASK) == STM32_APB2PERIPH_BASE)
- setbits_le32(&STM32_RCC->apb2enr,
- usart_port_rcc_pairs[usart_port][1]);
- else
- return -EINVAL;
+ plat->clock_rate = clk_get_rate(&clk);
+ if (plat->clock_rate < 0) {
+ clk_disable(&clk);
+ return plat->clock_rate;
+ };
- setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
+ _stm32_serial_init(plat->base, plat->uart_info);
+
+ return 0;
+}
+
+static const struct udevice_id stm32_serial_id[] = {
+ { .compatible = "st,stm32-uart", .data = (ulong)&stm32f4_info},
+ { .compatible = "st,stm32f7-uart", .data = (ulong)&stm32f7_info},
+ { .compatible = "st,stm32h7-uart", .data = (ulong)&stm32h7_info},
+ {}
+};
+
+static int stm32_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
+
+ plat->base = devfdt_get_addr(dev);
+ if (plat->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
return 0;
}
.pending = stm32_serial_pending,
.getc = stm32_serial_getc,
.setbrg = stm32_serial_setbrg,
+ .setconfig = stm32_serial_setconfig
};
U_BOOT_DRIVER(serial_stm32) = {
.name = "serial_stm32",
.id = UCLASS_SERIAL,
+ .of_match = of_match_ptr(stm32_serial_id),
+ .ofdata_to_platdata = of_match_ptr(stm32_serial_ofdata_to_platdata),
+ .platdata_auto_alloc_size = sizeof(struct stm32x7_serial_platdata),
.ops = &stm32_serial_ops,
.probe = stm32_serial_probe,
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
+#endif
};
+
+#ifdef CONFIG_DEBUG_UART_STM32
+#include <debug_uart.h>
+static inline struct stm32_uart_info *_debug_uart_info(void)
+{
+ struct stm32_uart_info *uart_info;
+
+#if defined(CONFIG_STM32F4)
+ uart_info = &stm32f4_info;
+#elif defined(CONFIG_STM32F7)
+ uart_info = &stm32f7_info;
+#else
+ uart_info = &stm32h7_info;
+#endif
+ return uart_info;
+}
+
+static inline void _debug_uart_init(void)
+{
+ fdt_addr_t base = CONFIG_DEBUG_UART_BASE;
+ struct stm32_uart_info *uart_info = _debug_uart_info();
+
+ _stm32_serial_init(base, uart_info);
+ _stm32_serial_setbrg(base, uart_info,
+ CONFIG_DEBUG_UART_CLOCK,
+ CONFIG_BAUDRATE);
+}
+
+static inline void _debug_uart_putc(int c)
+{
+ fdt_addr_t base = CONFIG_DEBUG_UART_BASE;
+ struct stm32_uart_info *uart_info = _debug_uart_info();
+
+ while (_stm32_serial_putc(base, uart_info, c) == -EAGAIN)
+ ;
+}
+
+DEBUG_UART_FUNCS
+#endif
projects / oweals / u-boot.git / blobdiff