pl01x: use C structs and readl/writel

[oweals/u-boot.git] / drivers / serial / serial_pl01x.c

diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index c0ae9472424541d20343e2ea2185d8202dafe8f1..5dfcde8774700b4b2fdd8319003f92bcf07394ec 100644 (file)
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -47,14 +47,20 @@ static int pl01x_tstc (int portnum);
 unsigned int baudrate = CONFIG_BAUDRATE;
 DECLARE_GLOBAL_DATA_PTR;
 
+static struct pl01x_regs *pl01x_get_regs(int portnum)
+{
+       return (struct pl01x_regs *) port[portnum];
+}
+
 #ifdef CONFIG_PL010_SERIAL
 
 int serial_init (void)
 {
+       struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
        unsigned int divisor;
 
        /* First, disable everything */
-       writel(0x0, port[CONSOLE_PORT] + UART_PL010_CR);
+       writel(0, &regs->pl010_cr);
 
        /* Set baud rate */
        switch (baudrate) {
@@ -82,15 +88,14 @@ int serial_init (void)
                divisor = UART_PL010_BAUD_38400;
        }
 
-       writel(((divisor & 0xf00) >> 8), port[CONSOLE_PORT] + UART_PL010_LCRM);
-       writel((divisor & 0xff), port[CONSOLE_PORT] + UART_PL010_LCRL);
+       writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm);
+       writel(divisor & 0xff, &regs->pl010_lcrl);
 
        /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
-       writel((UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN),
-               port[CONSOLE_PORT] + UART_PL010_LCRH);
+       writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, &regs->pl010_lcrh);
 
        /* Finally, enable the UART */
-       writel((UART_PL010_CR_UARTEN), port[CONSOLE_PORT] + UART_PL010_CR);
+       writel(UART_PL010_CR_UARTEN, &regs->pl010_cr);
 
        return 0;
 }
@@ -101,13 +106,14 @@ int serial_init (void)
 
 int serial_init (void)
 {
+       struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
        unsigned int temp;
        unsigned int divider;
        unsigned int remainder;
        unsigned int fraction;
 
        /* First, disable everything */
-       writel(0x0, port[CONSOLE_PORT] + UART_PL011_CR);
+       writel(0, &regs->pl011_cr);
 
        /*
         * Set baud rate
@@ -121,16 +127,16 @@ int serial_init (void)
        temp = (8 * remainder) / baudrate;
        fraction = (temp >> 1) + (temp & 1);
 
-       writel(divider, port[CONSOLE_PORT] + UART_PL011_IBRD);
-       writel(fraction, port[CONSOLE_PORT] + UART_PL011_FBRD);
+       writel(divider, &regs->pl011_ibrd);
+       writel(fraction, &regs->pl011_fbrd);
 
        /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
-       writel((UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN),
-               port[CONSOLE_PORT] + UART_PL011_LCRH);
+       writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN,
+              &regs->pl011_lcrh);
 
        /* Finally, enable the UART */
-       writel((UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE),
-               port[CONSOLE_PORT] + UART_PL011_CR);
+       writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE,
+              &regs->pl011_cr);
 
        return 0;
 }
@@ -170,28 +176,31 @@ void serial_setbrg (void)
 
 static void pl01x_putc (int portnum, char c)
 {
+       struct pl01x_regs *regs = pl01x_get_regs(portnum);
+
        /* Wait until there is space in the FIFO */
-       while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF)
+       while (readl(&regs->fr) & UART_PL01x_FR_TXFF)
                WATCHDOG_RESET();
 
        /* Send the character */
-       writel(c, port[portnum] + UART_PL01x_DR);
+       writel(c, &regs->dr);
 }
 
 static int pl01x_getc (int portnum)
 {
+       struct pl01x_regs *regs = pl01x_get_regs(portnum);
        unsigned int data;
 
        /* Wait until there is data in the FIFO */
-       while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE)
+       while (readl(&regs->fr) & UART_PL01x_FR_RXFE)
                WATCHDOG_RESET();
 
-       data = readl(port[portnum] + UART_PL01x_DR);
+       data = readl(&regs->dr);
 
        /* Check for an error flag */
        if (data & 0xFFFFFF00) {
                /* Clear the error */
-               writel(0xFFFFFFFF, port[portnum] + UART_PL01x_ECR);
+               writel(0xFFFFFFFF, &regs->ecr);
                return -1;
        }
 
@@ -200,7 +209,8 @@ static int pl01x_getc (int portnum)
 
 static int pl01x_tstc (int portnum)
 {
+       struct pl01x_regs *regs = pl01x_get_regs(portnum);
+
        WATCHDOG_RESET();
-       return !(readl(port[portnum] + UART_PL01x_FR) &
-                UART_PL01x_FR_RXFE);
+       return !(readl(&regs->fr) & UART_PL01x_FR_RXFE);
 }