#include <common.h>
#include <watchdog.h>
-
+#include <asm/io.h>
#include "serial_pl01x.h"
-#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val))
-#define IO_READ(addr) (*(volatile unsigned int *)(addr))
-
/*
* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
* Integrator CP has two UARTs, use the first one, at 38400-8-N-1
* Versatile PB has four UARTs.
*/
#define CONSOLE_PORT CONFIG_CONS_INDEX
-#define baudRate CONFIG_BAUDRATE
static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
static void pl01x_putc (int portnum, char c);
static int pl01x_getc (int portnum);
static int pl01x_tstc (int portnum);
+unsigned int baudrate = CONFIG_BAUDRATE;
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pl01x_regs *pl01x_get_regs(int portnum)
+{
+ return (struct pl01x_regs *) port[portnum];
+}
#ifdef CONFIG_PL010_SERIAL
int serial_init (void)
{
+ struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
unsigned int divisor;
- /*
- ** First, disable everything.
- */
- IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0);
+ /* First, disable everything */
+ writel(0, ®s->pl010_cr);
- /*
- ** Set baud rate
- **
- */
- switch (baudRate) {
+ /* Set baud rate */
+ switch (baudrate) {
case 9600:
divisor = UART_PL010_BAUD_9600;
break;
divisor = UART_PL010_BAUD_38400;
}
- IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM,
- ((divisor & 0xf00) >> 8));
- IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff));
+ writel((divisor & 0xf00) >> 8, ®s->pl010_lcrm);
+ writel(divisor & 0xff, ®s->pl010_lcrl);
- /*
- ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
- */
- IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH,
- (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN));
+ /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
+ writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, ®s->pl010_lcrh);
- /*
- ** Finally, enable the UART
- */
- IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN));
+ /* Finally, enable the UART */
+ writel(UART_PL010_CR_UARTEN, ®s->pl010_cr);
return 0;
}
int serial_init (void)
{
+ struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
unsigned int temp;
unsigned int divider;
unsigned int remainder;
unsigned int fraction;
- /*
- ** First, disable everything.
- */
- IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0);
+ /* First, disable everything */
+ writel(0, ®s->pl011_cr);
/*
- ** Set baud rate
- **
- ** IBRD = UART_CLK / (16 * BAUD_RATE)
- ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
+ * Set baud rate
+ *
+ * IBRD = UART_CLK / (16 * BAUD_RATE)
+ * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
*/
- temp = 16 * baudRate;
+ temp = 16 * baudrate;
divider = CONFIG_PL011_CLOCK / temp;
remainder = CONFIG_PL011_CLOCK % temp;
- temp = (8 * remainder) / baudRate;
+ temp = (8 * remainder) / baudrate;
fraction = (temp >> 1) + (temp & 1);
- IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
- IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
+ writel(divider, ®s->pl011_ibrd);
+ writel(fraction, ®s->pl011_fbrd);
- /*
- ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
- */
- IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH,
- (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN));
+ /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
+ writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN,
+ ®s->pl011_lcrh);
- /*
- ** Finally, enable the UART
- */
- IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR,
- (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
- UART_PL011_CR_RXE));
+ /* Finally, enable the UART */
+ writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE,
+ ®s->pl011_cr);
return 0;
}
void serial_setbrg (void)
{
+ baudrate = gd->baudrate;
+ serial_init();
}
static void pl01x_putc (int portnum, char c)
{
+ struct pl01x_regs *regs = pl01x_get_regs(portnum);
+
/* Wait until there is space in the FIFO */
- while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF)
+ while (readl(®s->fr) & UART_PL01x_FR_TXFF)
WATCHDOG_RESET();
/* Send the character */
- IO_WRITE (port[portnum] + UART_PL01x_DR, c);
+ writel(c, ®s->dr);
}
static int pl01x_getc (int portnum)
{
+ struct pl01x_regs *regs = pl01x_get_regs(portnum);
unsigned int data;
/* Wait until there is data in the FIFO */
- while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE)
+ while (readl(®s->fr) & UART_PL01x_FR_RXFE)
WATCHDOG_RESET();
- data = IO_READ (port[portnum] + UART_PL01x_DR);
+ data = readl(®s->dr);
/* Check for an error flag */
if (data & 0xFFFFFF00) {
/* Clear the error */
- IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
+ writel(0xFFFFFFFF, ®s->ecr);
return -1;
}
static int pl01x_tstc (int portnum)
{
+ struct pl01x_regs *regs = pl01x_get_regs(portnum);
+
WATCHDOG_RESET();
- return !(IO_READ (port[portnum] + UART_PL01x_FR) &
- UART_PL01x_FR_RXFE);
+ return !(readl(®s->fr) & UART_PL01x_FR_RXFE);
}