/*
* COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
+ * originally from linux source (arch/powerpc/boot/ns16550.c)
* modified to use CONFIG_SYS_ISA_MEM and new defines
*/
#include <config.h>
-
-#ifdef CONFIG_SYS_NS16550
-
#include <ns16550.h>
+#include <watchdog.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
+#define UART_MCRVAL (UART_MCR_DTR | \
+ UART_MCR_RTS) /* RTS/DTR */
+#define UART_FCRVAL (UART_FCR_FIFO_EN | \
+ UART_FCR_RXSR | \
+ UART_FCR_TXSR) /* Clear & enable FIFOs */
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
+#define serial_out(x,y) outb(x,(ulong)y)
+#define serial_in(y) inb((ulong)y)
+#else
+#define serial_out(x,y) writeb(x,y)
+#define serial_in(y) readb(y)
+#endif
-#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */
-#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */
-#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */
+#ifndef CONFIG_SYS_NS16550_IER
+#define CONFIG_SYS_NS16550_IER 0x00
+#endif /* CONFIG_SYS_NS16550_IER */
void NS16550_init (NS16550_t com_port, int baud_divisor)
{
- com_port->ier = 0x00;
-#ifdef CONFIG_OMAP
- com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
+ serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
+#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
+ serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
- com_port->lcr = LCR_BKSE | LCRVAL;
- com_port->dll = 0;
- com_port->dlm = 0;
- com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
- com_port->lcr = LCR_BKSE | LCRVAL;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCRVAL;
-#if defined(CONFIG_OMAP)
+ serial_out(UART_LCR_BKSE | UART_LCRVAL, (ulong)&com_port->lcr);
+ serial_out(0, &com_port->dll);
+ serial_out(0, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
+ serial_out(UART_MCRVAL, &com_port->mcr);
+ serial_out(UART_FCRVAL, &com_port->fcr);
+ serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+ serial_out(baud_divisor & 0xff, &com_port->dll);
+ serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
+#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
#if defined(CONFIG_APTIX)
- com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */
+ serial_out(3, &com_port->mdr1); /* /13 mode so Aptix 6MHz can hit 115200 */
#else
- com_port->mdr1 = 0; /* /16 is proper to hit 115200 with 48MHz */
-#endif
+ serial_out(0, &com_port->mdr1); /* /16 is proper to hit 115200 with 48MHz */
#endif
+#endif /* CONFIG_OMAP */
}
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
void NS16550_reinit (NS16550_t com_port, int baud_divisor)
{
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE | LCRVAL;
- com_port->dll = 0;
- com_port->dlm = 0;
- com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
- com_port->lcr = LCR_BKSE;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCRVAL;
+ serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
+ serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+ serial_out(0, &com_port->dll);
+ serial_out(0, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
+ serial_out(UART_MCRVAL, &com_port->mcr);
+ serial_out(UART_FCRVAL, &com_port->fcr);
+ serial_out(UART_LCR_BKSE, &com_port->lcr);
+ serial_out(baud_divisor & 0xff, &com_port->dll);
+ serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
}
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
void NS16550_putc (NS16550_t com_port, char c)
{
- while ((com_port->lsr & LSR_THRE) == 0);
- com_port->thr = c;
+ while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0);
+ serial_out(c, &com_port->thr);
+
+ /*
+ * Call watchdog_reset() upon newline. This is done here in putc
+ * since the environment code uses a single puts() to print the complete
+ * environment upon "printenv". So we can't put this watchdog call
+ * in puts().
+ */
+ if (c == '\n')
+ WATCHDOG_RESET();
}
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
char NS16550_getc (NS16550_t com_port)
{
- while ((com_port->lsr & LSR_DR) == 0) {
+ while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
#ifdef CONFIG_USB_TTY
extern void usbtty_poll(void);
usbtty_poll();
#endif
+ WATCHDOG_RESET();
}
- return (com_port->rbr);
+ return serial_in(&com_port->rbr);
}
int NS16550_tstc (NS16550_t com_port)
{
- return ((com_port->lsr & LSR_DR) != 0);
+ return ((serial_in(&com_port->lsr) & UART_LSR_DR) != 0);
}
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
-#endif