* modified to use CONFIG_SYS_ISA_MEM and new defines
*/
+#include <clock_legacy.h>
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <errno.h>
-#include <fdtdec.h>
#include <ns16550.h>
+#include <reset.h>
#include <serial.h>
#include <watchdog.h>
#include <linux/types.h>
#define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
#define UART_MCRVAL (UART_MCR_DTR | \
UART_MCR_RTS) /* RTS/DTR */
-#define UART_FCRVAL (UART_FCR_FIFO_EN | \
- UART_FCR_RXSR | \
- UART_FCR_TXSR) /* Clear & enable FIFOs */
-#ifndef CONFIG_DM_SERIAL
+#if !CONFIG_IS_ENABLED(DM_SERIAL)
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
#define serial_out(x, y) outb(x, (ulong)y)
#define serial_in(y) inb((ulong)y)
{
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
outb(value, (ulong)addr);
-#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN)
+#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN)
out_le32(addr, value);
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
out_be32(addr, value);
{
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
return inb((ulong)addr);
-#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN)
+#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN)
return in_le32(addr);
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
return in_be32(addr);
#endif
}
-#ifdef CONFIG_DM_SERIAL
+#if CONFIG_IS_ENABLED(DM_SERIAL)
#ifndef CONFIG_SYS_NS16550_CLK
#define CONFIG_SYS_NS16550_CLK 0
#endif
+/*
+ * Use this #ifdef for now since many platforms don't define in(), out(),
+ * out_le32(), etc. but we don't have #defines to indicate this.
+ *
+ * TODO(sjg@chromium.org): Add CONFIG options to indicate what I/O is available
+ * on a platform
+ */
+#ifdef CONFIG_NS16550_DYNAMIC
+static void serial_out_dynamic(struct ns16550_platdata *plat, u8 *addr,
+ int value)
+{
+ if (plat->flags & NS16550_FLAG_IO) {
+ outb(value, addr);
+ } else if (plat->reg_width == 4) {
+ if (plat->flags & NS16550_FLAG_ENDIAN) {
+ if (plat->flags & NS16550_FLAG_BE)
+ out_be32(addr, value);
+ else
+ out_le32(addr, value);
+ } else {
+ writel(value, addr);
+ }
+ } else if (plat->flags & NS16550_FLAG_BE) {
+ writeb(value, addr + (1 << plat->reg_shift) - 1);
+ } else {
+ writeb(value, addr);
+ }
+}
+
+static int serial_in_dynamic(struct ns16550_platdata *plat, u8 *addr)
+{
+ if (plat->flags & NS16550_FLAG_IO) {
+ return inb(addr);
+ } else if (plat->reg_width == 4) {
+ if (plat->flags & NS16550_FLAG_ENDIAN) {
+ if (plat->flags & NS16550_FLAG_BE)
+ return in_be32(addr);
+ else
+ return in_le32(addr);
+ } else {
+ return readl(addr);
+ }
+ } else if (plat->flags & NS16550_FLAG_BE) {
+ return readb(addr + (1 << plat->reg_shift) - 1);
+ } else {
+ return readb(addr);
+ }
+}
+#else
+static inline void serial_out_dynamic(struct ns16550_platdata *plat, u8 *addr,
+ int value)
+{
+}
+
+static inline int serial_in_dynamic(struct ns16550_platdata *plat, u8 *addr)
+{
+ return 0;
+}
+
+#endif /* CONFIG_NS16550_DYNAMIC */
+
static void ns16550_writeb(NS16550_t port, int offset, int value)
{
struct ns16550_platdata *plat = port->plat;
unsigned char *addr;
offset *= 1 << plat->reg_shift;
- addr = (unsigned char *)plat->base + offset;
+ addr = (unsigned char *)plat->base + offset + plat->reg_offset;
- /*
- * As far as we know it doesn't make sense to support selection of
- * these options at run-time, so use the existing CONFIG options.
- */
- serial_out_shift(addr + plat->reg_offset, plat->reg_shift, value);
+ if (IS_ENABLED(CONFIG_NS16550_DYNAMIC))
+ serial_out_dynamic(plat, addr, value);
+ else
+ serial_out_shift(addr, plat->reg_shift, value);
}
static int ns16550_readb(NS16550_t port, int offset)
unsigned char *addr;
offset *= 1 << plat->reg_shift;
- addr = (unsigned char *)plat->base + offset;
+ addr = (unsigned char *)plat->base + offset + plat->reg_offset;
- return serial_in_shift(addr + plat->reg_offset, plat->reg_shift);
+ if (IS_ENABLED(CONFIG_NS16550_DYNAMIC))
+ return serial_in_dynamic(plat, addr);
+ else
+ return serial_in_shift(addr, plat->reg_shift);
}
static u32 ns16550_getfcr(NS16550_t port)
#else
static u32 ns16550_getfcr(NS16550_t port)
{
- return UART_FCRVAL;
+ return UART_FCR_DEFVAL;
}
#endif
static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
{
- serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+ /* to keep serial format, read lcr before writing BKSE */
+ int lcr_val = serial_in(&com_port->lcr) & ~UART_LCR_BKSE;
+
+ serial_out(UART_LCR_BKSE | lcr_val, &com_port->lcr);
serial_out(baud_divisor & 0xff, &com_port->dll);
serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
- serial_out(UART_LCRVAL, &com_port->lcr);
+ serial_out(lcr_val, &com_port->lcr);
}
void NS16550_init(NS16550_t com_port, int baud_divisor)
== UART_LSR_THRE) {
if (baud_divisor != -1)
NS16550_setbrg(com_port, baud_divisor);
+ else {
+ // Re-use old baud rate divisor to flush transmit reg.
+ const int dll = serial_in(&com_port->dll);
+ const int dlm = serial_in(&com_port->dlm);
+ const int divisor = dll | (dlm << 8);
+ NS16550_setbrg(com_port, divisor);
+ }
serial_out(0, &com_port->mdr1);
}
#endif
;
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
-#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
+#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_OMAP_SERIAL)
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
+
serial_out(UART_MCRVAL, &com_port->mcr);
serial_out(ns16550_getfcr(com_port), &com_port->fcr);
+ /* initialize serial config to 8N1 before writing baudrate */
+ serial_out(UART_LCRVAL, &com_port->lcr);
if (baud_divisor != -1)
NS16550_setbrg(com_port, baud_divisor);
-#if defined(CONFIG_OMAP) || \
- defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
- defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
-
+#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) || \
+ defined(CONFIG_OMAP_SERIAL)
/* /16 is proper to hit 115200 with 48MHz */
serial_out(0, &com_port->mdr1);
-#endif /* CONFIG_OMAP */
+#endif
#if defined(CONFIG_SOC_KEYSTONE)
serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
#endif
#include <debug_uart.h>
-#define serial_dout(reg, value) \
- serial_out_shift((char *)com_port + \
- ((char *)reg - (char *)com_port) * \
- (1 << CONFIG_DEBUG_UART_SHIFT), \
- CONFIG_DEBUG_UART_SHIFT, value)
-#define serial_din(reg) \
- serial_in_shift((char *)com_port + \
- ((char *)reg - (char *)com_port) * \
- (1 << CONFIG_DEBUG_UART_SHIFT), \
- CONFIG_DEBUG_UART_SHIFT)
-
static inline void _debug_uart_init(void)
{
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
CONFIG_BAUDRATE);
serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
serial_dout(&com_port->mcr, UART_MCRVAL);
- serial_dout(&com_port->fcr, UART_FCRVAL);
+ serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
serial_dout(&com_port->dll, baud_divisor & 0xff);
serial_dout(&com_port->lcr, UART_LCRVAL);
}
+static inline int NS16550_read_baud_divisor(struct NS16550 *com_port)
+{
+ int ret;
+
+ serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
+ ret = serial_din(&com_port->dll) & 0xff;
+ ret |= (serial_din(&com_port->dlm) & 0xff) << 8;
+ serial_dout(&com_port->lcr, UART_LCRVAL);
+
+ return ret;
+}
+
static inline void _debug_uart_putc(int ch)
{
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
- while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
- ;
+ while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) {
+#ifdef CONFIG_DEBUG_UART_NS16550_CHECK_ENABLED
+ if (!NS16550_read_baud_divisor(com_port))
+ return;
+#endif
+ }
serial_dout(&com_port->thr, ch);
}
#endif
-#ifdef CONFIG_DM_SERIAL
+#if CONFIG_IS_ENABLED(DM_SERIAL)
static int ns16550_serial_putc(struct udevice *dev, const char ch)
{
struct NS16550 *const com_port = dev_get_priv(dev);
struct NS16550 *const com_port = dev_get_priv(dev);
if (input)
- return serial_in(&com_port->lsr) & UART_LSR_DR ? 1 : 0;
+ return (serial_in(&com_port->lsr) & UART_LSR_DR) ? 1 : 0;
else
- return serial_in(&com_port->lsr) & UART_LSR_THRE ? 0 : 1;
+ return (serial_in(&com_port->lsr) & UART_LSR_THRE) ? 0 : 1;
}
static int ns16550_serial_getc(struct udevice *dev)
return 0;
}
+static int ns16550_serial_setconfig(struct udevice *dev, uint serial_config)
+{
+ struct NS16550 *const com_port = dev_get_priv(dev);
+ int lcr_val = UART_LCR_WLS_8;
+ uint parity = SERIAL_GET_PARITY(serial_config);
+ uint bits = SERIAL_GET_BITS(serial_config);
+ uint stop = SERIAL_GET_STOP(serial_config);
+
+ /*
+ * only parity config is implemented, check if other serial settings
+ * are the default one.
+ */
+ if (bits != SERIAL_8_BITS || stop != SERIAL_ONE_STOP)
+ return -ENOTSUPP; /* not supported in driver*/
+
+ switch (parity) {
+ case SERIAL_PAR_NONE:
+ /* no bits to add */
+ break;
+ case SERIAL_PAR_ODD:
+ lcr_val |= UART_LCR_PEN;
+ break;
+ case SERIAL_PAR_EVEN:
+ lcr_val |= UART_LCR_PEN | UART_LCR_EPS;
+ break;
+ default:
+ return -ENOTSUPP; /* not supported in driver*/
+ }
+
+ serial_out(lcr_val, &com_port->lcr);
+ return 0;
+}
+
+static int ns16550_serial_getinfo(struct udevice *dev,
+ struct serial_device_info *info)
+{
+ struct NS16550 *const com_port = dev_get_priv(dev);
+ struct ns16550_platdata *plat = com_port->plat;
+
+ info->type = SERIAL_CHIP_16550_COMPATIBLE;
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
+ info->addr_space = SERIAL_ADDRESS_SPACE_IO;
+#else
+ info->addr_space = SERIAL_ADDRESS_SPACE_MEMORY;
+#endif
+ info->addr = plat->base;
+ info->reg_width = plat->reg_width;
+ info->reg_shift = plat->reg_shift;
+ info->reg_offset = plat->reg_offset;
+ return 0;
+}
+
int ns16550_serial_probe(struct udevice *dev)
{
struct NS16550 *const com_port = dev_get_priv(dev);
+ struct reset_ctl_bulk reset_bulk;
+ int ret;
+
+ ret = reset_get_bulk(dev, &reset_bulk);
+ if (!ret)
+ reset_deassert_bulk(&reset_bulk);
com_port->plat = dev_get_platdata(dev);
NS16550_init(com_port, -1);
int err;
/* try Processor Local Bus device first */
- addr = dev_get_addr(dev);
-#if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI)
- if (addr == FDT_ADDR_T_NONE) {
- /* then try pci device */
- struct fdt_pci_addr pci_addr;
- u32 bar;
- int ret;
-
- /* we prefer to use a memory-mapped register */
- ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset,
- FDT_PCI_SPACE_MEM32, "reg",
- &pci_addr);
- if (ret) {
- /* try if there is any i/o-mapped register */
- ret = fdtdec_get_pci_addr(gd->fdt_blob,
- dev->of_offset,
- FDT_PCI_SPACE_IO,
- "reg", &pci_addr);
- if (ret)
- return ret;
- }
-
- ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar);
- if (ret)
- return ret;
-
- addr = bar;
- }
-#endif
-
+ addr = dev_read_addr_pci(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
#endif
- plat->reg_offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
- "reg-offset", 0);
- plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
- "reg-shift", 0);
+ plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
+ plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0);
+ plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);
err = clk_get_by_index(dev, 0, &clk);
if (!err) {
}
if (!plat->clock)
- plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
- "clock-frequency",
- CONFIG_SYS_NS16550_CLK);
+ plat->clock = dev_read_u32_default(dev, "clock-frequency",
+ CONFIG_SYS_NS16550_CLK);
if (!plat->clock) {
debug("ns16550 clock not defined\n");
return -EINVAL;
}
- plat->fcr = UART_FCRVAL;
+ plat->fcr = UART_FCR_DEFVAL;
if (port_type == PORT_JZ4780)
plat->fcr |= UART_FCR_UME;
.pending = ns16550_serial_pending,
.getc = ns16550_serial_getc,
.setbrg = ns16550_serial_setbrg,
+ .setconfig = ns16550_serial_setconfig,
+ .getinfo = ns16550_serial_getinfo,
};
-#if !CONFIG_IS_ENABLED(OF_PLATDATA)
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
/*
* Please consider existing compatible strings before adding a new
* one to keep this table compact. Or you may add a generic "ns16550"
{ .compatible = "ingenic,jz4780-uart", .data = PORT_JZ4780 },
{ .compatible = "nvidia,tegra20-uart", .data = PORT_NS16550 },
{ .compatible = "snps,dw-apb-uart", .data = PORT_NS16550 },
- { .compatible = "ti,omap2-uart", .data = PORT_NS16550 },
- { .compatible = "ti,omap3-uart", .data = PORT_NS16550 },
- { .compatible = "ti,omap4-uart", .data = PORT_NS16550 },
- { .compatible = "ti,am3352-uart", .data = PORT_NS16550 },
- { .compatible = "ti,am4372-uart", .data = PORT_NS16550 },
- { .compatible = "ti,dra742-uart", .data = PORT_NS16550 },
{}
};
-#endif
+#endif /* OF_CONTROL && !OF_PLATDATA */
#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
+
+/* TODO(sjg@chromium.org): Integrate this into a macro like CONFIG_IS_ENABLED */
+#if !defined(CONFIG_TPL_BUILD) || defined(CONFIG_TPL_DM_SERIAL)
U_BOOT_DRIVER(ns16550_serial) = {
.name = "ns16550_serial",
.id = UCLASS_SERIAL,
-#if CONFIG_IS_ENABLED(OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = ns16550_serial_ids,
.ofdata_to_platdata = ns16550_serial_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
.priv_auto_alloc_size = sizeof(struct NS16550),
.probe = ns16550_serial_probe,
.ops = &ns16550_serial_ops,
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
+#endif
};
#endif
-#endif /* !OF_PLATDATA */
+#endif /* SERIAL_PRESENT */
+
#endif /* CONFIG_DM_SERIAL */
projects / oweals / u-boot.git / blobdiff