Merge tag 'signed-efi-2019.01' of git://github.com/agraf/u-boot

[oweals/u-boot.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 597db4b9cbba9b644edeedcf01f9483cff23ff47..b7ff2960abfef26787c3bbb1b53dc5deb7647413 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -343,6 +343,13 @@ config DEBUG_UART_SANDBOX
          start up driver model. The driver will be available until the real
          driver model serial is running.
 
+config DEBUG_UART_SIFIVE
+       bool "SiFive UART"
+       help
+         Select this to enable a debug UART using the serial_sifive driver. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver-model serial is running.
+
 config DEBUG_UART_STM32
        bool "STMicroelectronics STM32"
        depends on STM32_SERIAL
@@ -368,6 +375,16 @@ config DEBUG_UART_OMAP
          You will need to provide parameters to make this work. The driver
          will be available until the real driver model serial is running.
 
+config DEBUG_UART_MTK
+       bool "MediaTek High-speed UART"
+       depends on MTK_SERIAL
+       help
+         Select this to enable a debug UART using the MediaTek High-speed
+         UART driver.
+         You will need to provide parameters to make this work. The
+         driver will be available until the real driver model serial is
+         running.
+
 endchoice
 
 config DEBUG_UART_BASE
@@ -496,7 +513,7 @@ config BCM283X_PL011_SERIAL
 
 config BCM6345_SERIAL
        bool "Support for BCM6345 UART"
-       depends on DM_SERIAL && ARCH_BMIPS
+       depends on DM_SERIAL
        help
          Select this to enable UART on BCM6345 SoCs.
 
@@ -669,6 +686,12 @@ config PXA_SERIAL
          If you have a machine based on a Marvell XScale PXA2xx CPU you
          can enable its onboard serial ports by enabling this option.
 
+config SIFIVE_SERIAL
+       bool "SiFive UART support"
+       depends on DM_SERIAL
+       help
+         This driver supports the SiFive UART. If unsure say N.
+
 config STI_ASC_SERIAL
        bool "STMicroelectronics on-chip UART"
        depends on DM_SERIAL && ARCH_STI
@@ -692,6 +715,16 @@ config ZYNQ_SERIAL
          This driver supports the Cadence UART. It is found e.g. in Xilinx
          Zynq/ZynqMP.
 
+config MTK_SERIAL
+       bool "MediaTek High-speed UART support"
+       depends on DM_SERIAL
+       help
+         Select this to enable UART support for MediaTek High-speed UART
+         devices. This driver uses driver model and requires a device
+         tree binding to operate.
+         The High-speed UART is compatible with the ns16550a UART and have
+         its own high-speed registers.
+
 config MPC8XX_CONS
        bool "Console driver for MPC8XX"
        depends on MPC8xx