dm: core: Update lists_bind_fdt() to use ofnode

[oweals/u-boot.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c0ec2ec2e4d03577fbcde4eddb6ae6a1ff374a45..58fc7cd2e66a75e50041f9a83c7a4273dbd17a87 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -44,6 +44,17 @@ config SPL_SERIAL_PRESENT
          This option enables the full UART in SPL, so if is it disabled,
          the full UART driver will be omitted, thus saving space.
 
+config CONS_INDEX
+       int "UART used for console"
+       depends on ARCH_SUNXI
+       default 2 if MACH_SUN5I
+       default 5 if MACH_SUN8I_A23 || MACH_SUN8I_A33
+       default 1
+       help
+         Configures the console index.
+         For Allwinner SoC., default values are 2 for SUN5I and 5 for A23/A33.
+         Otherwise, the index equals 1.
+
 config DM_SERIAL
        bool "Enable Driver Model for serial drivers"
        depends on DM
@@ -134,6 +145,14 @@ config DEBUG_UART_ATMEL
          will need to provide parameters to make this work. The driver will
          be available until the real driver-model serial is running.
 
+config DEBUG_UART_BCM6345
+       bool "BCM6345 UART"
+       depends on BCM6345_SERIAL
+       help
+         Select this to enable a debug UART on BCM6345 SoCs. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver model serial is running.
+
 config DEBUG_UART_NS16550
        bool "ns16550"
        help
@@ -238,6 +257,13 @@ config DEBUG_UART_UNIPHIER
          driver will be available until the real driver-model serial is
          running.
 
+config DEBUG_UART_OMAP
+       bool "OMAP uart"
+       help
+         Select this to enable a debug UART using the omap ns16550 driver.
+         You will need to provide parameters to make this work. The driver
+         will be available until the real driver model serial is running.
+
 endchoice
 
 config DEBUG_UART_BASE
@@ -339,6 +365,12 @@ config ATMEL_USART
          configured in the device tree, and input clock frequency can
          be got from the clk node.
 
+config BCM6345_SERIAL
+       bool "Support for BCM6345 UART"
+       depends on DM_SERIAL && ARCH_BMIPS
+       help
+         Select this to enable UART on BCM6345 SoCs.
+
 config FSL_LPUART
        bool "Freescale LPUART support"
        help