Merge branch 'master' of git://git.denx.de/u-boot-tegra

[oweals/u-boot.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 2497ae90a09051b2fa055b8e2f5d53c06cca23cb..541cf2e512f0b9844e29f32fc7096f09fb3e647a 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -121,6 +121,14 @@ config DEBUG_UART_S5P
          will need to provide parameters to make this work. The driver will
          be available until the real driver-model serial is running.
 
+config DEBUG_UART_MESON
+       bool "Amlogic Meson"
+       depends on MESON_SERIAL
+       help
+         Select this to enable a debug UART using the serial_meson driver. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver-model serial is running.
+
 config DEBUG_UART_UARTLITE
        bool "Xilinx Uartlite"
        help
@@ -139,6 +147,13 @@ config DEBUG_UART_ARM_DCC
          This port is available at least on ARMv6, ARMv7, ARMv8 and XScale
          architectures.
 
+config DEBUG_MVEBU_A3700_UART
+       bool "Marvell Armada 3700"
+       help
+         Select this to enable a debug UART using the serial_mvebu driver. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver-model serial is running.
+
 config DEBUG_UART_ZYNQ
        bool "Xilinx Zynq"
        help
@@ -287,6 +302,13 @@ config FSL_LPUART
          Select this to enable a Low Power UART for Freescale VF610 and
          QorIQ Layerscape devices.
 
+config MVEBU_A3700_UART
+       bool "UART support for Armada 3700"
+       default n
+       help
+         Choose this option to add support for UART driver on the Marvell
+         Armada 3700 SoC. The base address is configured via DT.
+
 config PIC32_SERIAL
        bool "Support for Microchip PIC32 on-chip UART"
        depends on DM_SERIAL && MACH_PIC32
@@ -304,6 +326,15 @@ config SYS_NS16550
          be used. It can be a constant or a function to get clock, eg,
          get_serial_clock().
 
+config ROCKCHIP_SERIAL
+       bool "Rockchip on-chip UART support"
+       depends on DM_SERIAL && SPL_OF_PLATDATA
+       help
+         Select this to enable a debug UART for Rockchip devices when using
+         CONFIG_OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).
+         This uses the ns16550 driver, converting the platdata from of-platdata
+         to the ns16550 format.
+
 config SANDBOX_SERIAL
        bool "Sandbox UART support"
        depends on SANDBOX
@@ -327,6 +358,7 @@ config SANDBOX_SERIAL
 config UNIPHIER_SERIAL
        bool "Support for UniPhier on-chip UART"
        depends on ARCH_UNIPHIER
+       default y
        help
          If you have a UniPhier based board and want to use the on-chip
          serial ports, say Y to this option. If unsure, say N.
@@ -338,6 +370,13 @@ config XILINX_UARTLITE
          If you have a Xilinx based board and want to use the uartlite
          serial ports, say Y to this option. If unsure, say N.
 
+config MESON_SERIAL
+       bool "Support for Amlogic Meson UART"
+       depends on DM_SERIAL && ARCH_MESON
+       help
+         If you have an Amlogic Meson based board and want to use the on-chip
+         serial ports, say Y to this option. If unsure, say N.
+
 config MSM_SERIAL
        bool "Qualcomm on-chip UART"
        depends on DM_SERIAL
@@ -346,4 +385,5 @@ config MSM_SERIAL
          It should support all Qualcomm devices with UARTDM version 1.4,
          for example APQ8016 and MSM8916.
          Single baudrate is supported in current implementation (115200).
+
 endmenu