fsl: Change fsl_phy_enet_if to phy_interface_t

[oweals/u-boot.git] / drivers / qe / uec_phy.c

diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index c83ca4b58212e422aa6eba43c1ddcf06d282a749..e26218be88afc64e41d35c0fd99b0927bf33824f 100644 (file)
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -25,6 +25,7 @@
 #include "uec.h"
 #include "uec_phy.h"
 #include "miiphy.h"
+#include <phy.h>
 
 #define ugphy_printk(format, arg...)  \
        printf(format "\n", ## arg)
@@ -456,8 +457,9 @@ static int bcm_init(struct uec_mii_info *mii_info)
 
        gbit_config_aneg(mii_info);
 
-       if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
-          (uec->uec_info->speed == 1000)) {
+       if ((uec->uec_info->enet_interface_type ==
+                               PHY_INTERFACE_MODE_RGMII_RXID) &&
+                       (uec->uec_info->speed == SPEED_1000)) {
                u16 val;
                int cnt = 50;
 
@@ -485,22 +487,22 @@ static int uec_marvell_init(struct uec_mii_info *mii_info)
 {
        struct eth_device *edev = mii_info->dev;
        uec_private_t *uec = edev->priv;
-       enum fsl_phy_enet_if iface = uec->uec_info->enet_interface_type;
+       phy_interface_t iface = uec->uec_info->enet_interface_type;
        int     speed = uec->uec_info->speed;
 
-       if ((speed == 1000) &&
-          (iface == RGMII_ID ||
-           iface == RGMII_RXID ||
-           iface == RGMII_TXID)) {
+       if ((speed == SPEED_1000) &&
+          (iface == PHY_INTERFACE_MODE_RGMII_ID ||
+           iface == PHY_INTERFACE_MODE_RGMII_RXID ||
+           iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
                int temp;
 
                temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
-               if (iface == RGMII_ID) {
+               if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
                        temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
-               } else if (iface == RGMII_RXID) {
+               } else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
                        temp &= ~MII_M1111_TX_DELAY;
                        temp |= MII_M1111_RX_DELAY;
-               } else if (iface == RGMII_TXID) {
+               } else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
                        temp &= ~MII_M1111_RX_DELAY;
                        temp |= MII_M1111_TX_DELAY;
                }
@@ -853,10 +855,8 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
        return theInfo;
 }
 
-void marvell_phy_interface_mode (struct eth_device *dev,
-                                enum fsl_phy_enet_if type,
-                                int speed
-                               )
+void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
+               int speed)
 {
        uec_private_t *uec = (uec_private_t *) dev->priv;
        struct uec_mii_info *mii_info;
@@ -868,8 +868,8 @@ void marvell_phy_interface_mode (struct eth_device *dev,
        }
        mii_info = uec->mii_info;
 
-       if (type == RGMII) {
-               if (speed == 100) {
+       if (type == PHY_INTERFACE_MODE_RGMII) {
+               if (speed == SPEED_100) {
                        uec_phy_write(mii_info, 0x00, 0x9140);
                        uec_phy_write(mii_info, 0x1d, 0x001f);
                        uec_phy_write(mii_info, 0x1e, 0x200c);
@@ -890,7 +890,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
                        uec_phy_write(mii_info, 0x00, 0xa100);
                        uec_phy_write(mii_info, 0x00, 0x2100);
                        udelay (1000000);
-               } else if (speed == 10) {
+               } else if (speed == SPEED_10) {
                        uec_phy_write(mii_info, 0x14, 0x8e40);
                        uec_phy_write(mii_info, 0x1b, 0x800b);
                        uec_phy_write(mii_info, 0x14, 0x0c82);
@@ -908,7 +908,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 }
 
 void change_phy_interface_mode (struct eth_device *dev,
-                               enum fsl_phy_enet_if type, int speed)
+                               phy_interface_t type, int speed)
 {
 #ifdef CONFIG_PHY_MODE_NEED_CHANGE
        marvell_phy_interface_mode (dev, type, speed);