/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006-2010 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
#ifndef __UEC_H__
#define __UEC_H__
+#include "qe.h"
+#include "uccf.h"
+#include <asm/fsl_enet.h>
+
#define MAX_TX_THREADS 8
#define MAX_RX_THREADS 8
#define MAX_TX_QUEUES 8
#define UPSMR_CAM 0x00000400 /* CAM Address Matching */
#define UPSMR_BRO 0x00000200 /* Broadcast Address */
#define UPSMR_RES1 0x00002000 /* Reserved feild - must be 1 */
+#define UPSMR_SGMM 0x00000020 /* SGMII mode */
#define UPSMR_INIT_VALUE (UPSMR_HSE | UPSMR_RES1)
ENET_TBI_MII_TBICON = 0x11
} enet_tbi_mii_reg_e;
+/* TBI MDIO register bit fields*/
+#define TBICON_CLK_SELECT 0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE 0x0080
+#define TBIANA_HALF_DUPLEX 0x0040
+#define TBIANA_FULL_DUPLEX 0x0020
+#define TBICR_PHY_RESET 0x8000
+#define TBICR_ANEG_ENABLE 0x1000
+#define TBICR_RESTART_ANEG 0x0200
+#define TBICR_FULL_DUPLEX 0x0100
+#define TBICR_SPEED1_SET 0x0040
+
+#define TBIANA_SETTINGS ( \
+ TBIANA_ASYMMETRIC_PAUSE \
+ | TBIANA_SYMMETRIC_PAUSE \
+ | TBIANA_FULL_DUPLEX \
+ )
+
+#define TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_ANEG_ENABLE \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
/* UEC number of threads
*/
typedef enum uec_num_of_threads {
UEC_NUM_OF_THREADS_8 = 0x4 /* 8 */
} uec_num_of_threads_e;
-/* UEC ethernet interface type
-*/
-typedef enum enet_interface {
- ENET_10_MII,
- ENET_10_RMII,
- ENET_10_RGMII,
- ENET_100_MII,
- ENET_100_RMII,
- ENET_100_RGMII,
- ENET_1000_GMII,
- ENET_1000_RGMII,
- ENET_1000_RGMII_RXID,
- ENET_1000_TBI,
- ENET_1000_RTBI
-} enet_interface_e;
-
/* UEC initialization info struct
*/
+#define STD_UEC_INFO(num) \
+{ \
+ .uf_info = { \
+ .ucc_num = CONFIG_SYS_UEC##num##_UCC_NUM,\
+ .rx_clock = CONFIG_SYS_UEC##num##_RX_CLK, \
+ .tx_clock = CONFIG_SYS_UEC##num##_TX_CLK, \
+ .eth_type = CONFIG_SYS_UEC##num##_ETH_TYPE,\
+ }, \
+ .num_threads_tx = UEC_NUM_OF_THREADS_1, \
+ .num_threads_rx = UEC_NUM_OF_THREADS_1, \
+ .risc_tx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, \
+ .risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, \
+ .tx_bd_ring_len = 16, \
+ .rx_bd_ring_len = 16, \
+ .phy_address = CONFIG_SYS_UEC##num##_PHY_ADDR, \
+ .enet_interface_type = CONFIG_SYS_UEC##num##_INTERFACE_TYPE, \
+ .speed = CONFIG_SYS_UEC##num##_INTERFACE_SPEED, \
+}
+
typedef struct uec_info {
ucc_fast_info_t uf_info;
uec_num_of_threads_e num_threads_tx;
uec_num_of_threads_e num_threads_rx;
- qe_risc_allocation_e riscTx;
- qe_risc_allocation_e riscRx;
+ unsigned int risc_tx;
+ unsigned int risc_rx;
u16 rx_bd_ring_len;
u16 tx_bd_ring_len;
u8 phy_address;
- enet_interface_e enet_interface;
+ enum fsl_phy_enet_if enet_interface_type;
+ int speed;
} uec_info_t;
/* UEC driver initialized info
int oldlink;
} uec_private_t;
+int uec_initialize(bd_t *bis, uec_info_t *uec_info);
+int uec_eth_init(bd_t *bis, uec_info_t *uecs, int num);
+int uec_standard_init(bd_t *bis);
#endif /* __UEC_H__ */