* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
- * Derived from code on omapzoom, git://git.omapzoom.com/repo/u-boot.git
+ * twl4030_power_reset_init is derived from code on omapzoom,
+ * git://git.omapzoom.com/repo/u-boot.git
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
+ *
+ * twl4030_power_init is from cpu/omap3/common.c, power_init_r
+ *
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Sunil Kumar <sunilsaini05 at gmail.com>
+ * Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ * Syed Mohammed Khasim <khasim at ti.com>
+ *
*/
#include <twl4030.h>
}
}
+/*
+ * Set Device Group and Voltage
+ */
+void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
+ u8 dev_grp, u8 dev_grp_sel)
+{
+ /* Select the Device Group */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel,
+ dev_grp);
+ /* Select the Voltage */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val,
+ vsel_reg);
+}
+
+void twl4030_power_init(void)
+{
+ /* set VAUX3 to 2.8V */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED,
+ TWL4030_PM_RECEIVER_VAUX3_VSEL_28,
+ TWL4030_PM_RECEIVER_VAUX3_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+ /* set VPLL2 to 1.8V */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED,
+ TWL4030_PM_RECEIVER_VPLL2_VSEL_18,
+ TWL4030_PM_RECEIVER_VPLL2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_ALL);
+
+ /* set VDAC to 1.8V */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED,
+ TWL4030_PM_RECEIVER_VDAC_VSEL_18,
+ TWL4030_PM_RECEIVER_VDAC_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+}
+
+void twl4030_power_mmc_init(void)
+{
+ /* Set VMMC1 to 3.15 Volts */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
+ TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
+ TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+}