sandbox: pmic: Correct i2c pmic emulator platdata method
[oweals/u-boot.git] / drivers / power / axp221.c
index 941193a19da516f68f404f9363a9bdbfd46b03b4..c440047d36fe50669b820d499c39e28908ccd462 100644 (file)
@@ -1,13 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * AXP221 and AXP223 driver
+ *
+ * IMPORTANT when making changes to this file check that the registers
+ * used are the same for the axp221 and axp223.
  *
- * SPDX-License-Identifier:    GPL-2.0+
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
  */
 
 #include <common.h>
+#include <command.h>
 #include <errno.h>
-#include <asm/arch/p2wi.h>
-#include <axp221.h>
+#include <asm/arch/pmic_bus.h>
+#include <axp_pmic.h>
 
 static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
 {
@@ -19,168 +25,252 @@ static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
        return (mvolt - min) / div;
 }
 
-static int axp221_setbits(u8 reg, u8 bits)
+int axp_set_dcdc1(unsigned int mvolt)
 {
        int ret;
-       u8 val;
+       u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
+
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+                                       AXP221_OUTPUT_CTRL1_DCDC1_EN);
+
+       ret = pmic_bus_write(AXP221_DCDC1_CTRL, cfg);
+       if (ret)
+               return ret;
 
-       ret = p2wi_read(reg, &val);
+       ret = pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
+                              AXP221_OUTPUT_CTRL2_DCDC1SW_EN);
        if (ret)
                return ret;
 
-       val |= bits;
-       return p2wi_write(reg, val);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+                               AXP221_OUTPUT_CTRL1_DCDC1_EN);
 }
 
-int axp221_set_dcdc1(unsigned int mvolt)
+int axp_set_dcdc2(unsigned int mvolt)
 {
        int ret;
-       u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
+       u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
 
-       ret = p2wi_write(AXP221_DCDC1_CTRL, cfg);
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+                                       AXP221_OUTPUT_CTRL1_DCDC2_EN);
+
+       ret = pmic_bus_write(AXP221_DCDC2_CTRL, cfg);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL2,
-                             AXP221_OUTPUT_CTRL2_DCDC1_EN);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+                               AXP221_OUTPUT_CTRL1_DCDC2_EN);
 }
 
-int axp221_set_dcdc2(unsigned int mvolt)
+int axp_set_dcdc3(unsigned int mvolt)
 {
-       u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
+       int ret;
+       u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
 
-       return p2wi_write(AXP221_DCDC2_CTRL, cfg);
-}
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+                                       AXP221_OUTPUT_CTRL1_DCDC3_EN);
 
-int axp221_set_dcdc3(unsigned int mvolt)
-{
-       u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
+       ret = pmic_bus_write(AXP221_DCDC3_CTRL, cfg);
+       if (ret)
+               return ret;
 
-       return p2wi_write(AXP221_DCDC3_CTRL, cfg);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+                               AXP221_OUTPUT_CTRL1_DCDC3_EN);
 }
 
-int axp221_set_dcdc4(unsigned int mvolt)
+int axp_set_dcdc4(unsigned int mvolt)
 {
+       int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
 
-       return p2wi_write(AXP221_DCDC4_CTRL, cfg);
-}
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+                                       AXP221_OUTPUT_CTRL1_DCDC4_EN);
 
-int axp221_set_dcdc5(unsigned int mvolt)
-{
-       u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
+       ret = pmic_bus_write(AXP221_DCDC4_CTRL, cfg);
+       if (ret)
+               return ret;
 
-       return p2wi_write(AXP221_DCDC5_CTRL, cfg);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+                               AXP221_OUTPUT_CTRL1_DCDC4_EN);
 }
 
-int axp221_set_dldo1(unsigned int mvolt)
+int axp_set_dcdc5(unsigned int mvolt)
 {
        int ret;
-       u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+       u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
+
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+                                       AXP221_OUTPUT_CTRL1_DCDC5_EN);
 
-       ret = p2wi_write(AXP221_DLDO1_CTRL, cfg);
+       ret = pmic_bus_write(AXP221_DCDC5_CTRL, cfg);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL2,
-                             AXP221_OUTPUT_CTRL2_DLDO1_EN);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+                               AXP221_OUTPUT_CTRL1_DCDC5_EN);
 }
 
-int axp221_set_dldo2(unsigned int mvolt)
+int axp_set_aldo1(unsigned int mvolt)
 {
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_DLDO2_CTRL, cfg);
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+                                       AXP221_OUTPUT_CTRL1_ALDO1_EN);
+
+       ret = pmic_bus_write(AXP221_ALDO1_CTRL, cfg);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL2,
-                             AXP221_OUTPUT_CTRL2_DLDO2_EN);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+                               AXP221_OUTPUT_CTRL1_ALDO1_EN);
 }
 
-int axp221_set_dldo3(unsigned int mvolt)
+int axp_set_aldo2(unsigned int mvolt)
 {
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_DLDO3_CTRL, cfg);
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
+                                       AXP221_OUTPUT_CTRL1_ALDO2_EN);
+
+       ret = pmic_bus_write(AXP221_ALDO2_CTRL, cfg);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL2,
-                             AXP221_OUTPUT_CTRL2_DLDO3_EN);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
+                               AXP221_OUTPUT_CTRL1_ALDO2_EN);
 }
 
-int axp221_set_dldo4(unsigned int mvolt)
+int axp_set_aldo3(unsigned int mvolt)
 {
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_DLDO4_CTRL, cfg);
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL3,
+                                       AXP221_OUTPUT_CTRL3_ALDO3_EN);
+
+       ret = pmic_bus_write(AXP221_ALDO3_CTRL, cfg);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL2,
-                             AXP221_OUTPUT_CTRL2_DLDO4_EN);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL3,
+                               AXP221_OUTPUT_CTRL3_ALDO3_EN);
 }
 
-int axp221_set_aldo1(unsigned int mvolt)
+int axp_set_dldo(int dldo_num, unsigned int mvolt)
 {
-       int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+       int ret;
+
+       if (dldo_num < 1 || dldo_num > 4)
+               return -EINVAL;
 
-       ret = p2wi_write(AXP221_ALDO1_CTRL, cfg);
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
+                               AXP221_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1));
+
+       ret = pmic_bus_write(AXP221_DLDO1_CTRL + (dldo_num - 1), cfg);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL1,
-                             AXP221_OUTPUT_CTRL1_ALDO1_EN);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
+                               AXP221_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1));
 }
 
-int axp221_set_aldo2(unsigned int mvolt)
+int axp_set_eldo(int eldo_num, unsigned int mvolt)
 {
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_ALDO2_CTRL, cfg);
+       if (eldo_num < 1 || eldo_num > 3)
+               return -EINVAL;
+
+       if (mvolt == 0)
+               return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
+                               AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
+
+       ret = pmic_bus_write(AXP221_ELDO1_CTRL + (eldo_num - 1), cfg);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL1,
-                             AXP221_OUTPUT_CTRL1_ALDO2_EN);
+       return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
+                               AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
 }
 
-int axp221_set_aldo3(unsigned int mvolt)
+int axp_init(void)
 {
+       u8 axp_chip_id;
        int ret;
-       u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_ALDO3_CTRL, cfg);
+       ret = pmic_bus_init();
+       if (ret)
+               return ret;
+
+       ret = pmic_bus_read(AXP221_CHIP_ID, &axp_chip_id);
+       if (ret)
+               return ret;
+
+       if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
+               return -ENODEV;
+
+       /*
+        * Turn off LDOIO regulators / tri-state GPIO pins, when rebooting
+        * from android these are sometimes on.
+        */
+       ret = pmic_bus_write(AXP_GPIO0_CTRL, AXP_GPIO_CTRL_INPUT);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL3,
-                             AXP221_OUTPUT_CTRL3_ALDO3_EN);
+       ret = pmic_bus_write(AXP_GPIO1_CTRL, AXP_GPIO_CTRL_INPUT);
+       if (ret)
+               return ret;
+
+       return 0;
 }
 
-int axp221_init(void)
+int axp_get_sid(unsigned int *sid)
 {
-       u8 axp_chip_id;
-       int ret;
+       u8 *dest = (u8 *)sid;
+       int i, ret;
 
-       p2wi_init();
-       ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
-                                      AXP221_INIT_DATA);
+       ret = pmic_bus_init();
        if (ret)
                return ret;
 
-       ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id);
+       ret = pmic_bus_write(AXP221_PAGE, 1);
        if (ret)
                return ret;
 
-       if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
-               return -ENODEV;
+       for (i = 0; i < 16; i++) {
+               ret = pmic_bus_read(AXP221_SID + i, &dest[i]);
+               if (ret)
+                       return ret;
+       }
+
+       pmic_bus_write(AXP221_PAGE, 0);
+
+       for (i = 0; i < 4; i++)
+               sid[i] = be32_to_cpu(sid[i]);
+
+       return 0;
+}
+
+int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+       pmic_bus_write(AXP221_SHUTDOWN, AXP221_SHUTDOWN_POWEROFF);
+
+       /* infinite loop during shutdown */
+       while (1) {}
 
+       /* not reached */
        return 0;
 }