Merge branch 'master' of git://git.denx.de/u-boot-blackfin
[oweals/u-boot.git] / drivers / power / axp221.c
index 826567a836b2284d9185533cc242659fb3e6be47..3e07f23c20c621ba9cbfc101d788462aed93026d 100644 (file)
@@ -1,4 +1,10 @@
 /*
+ * AXP221 and AXP223 driver
+ *
+ * IMPORTANT when making changes to this file check that the registers
+ * used are the same for the axp221 and axp223.
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
  * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
  *
  * SPDX-License-Identifier:    GPL-2.0+
@@ -7,8 +13,48 @@
 #include <common.h>
 #include <errno.h>
 #include <asm/arch/p2wi.h>
+#include <asm/arch/rsb.h>
 #include <axp221.h>
 
+/*
+ * The axp221 uses the p2wi bus, the axp223 is identical (for all registers
+ * used sofar) but uses the rsb bus. These functions abstract this.
+ */
+static int pmic_bus_init(void)
+{
+#ifdef CONFIG_MACH_SUN6I
+       p2wi_init();
+       return p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
+                                       AXP221_INIT_DATA);
+#else
+       int ret;
+
+       ret = rsb_init();
+       if (ret)
+               return ret;
+
+       return rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
+#endif
+}
+
+static int pmic_bus_read(const u8 addr, u8 *data)
+{
+#ifdef CONFIG_MACH_SUN6I
+       return p2wi_read(addr, data);
+#else
+       return rsb_read(AXP223_RUNTIME_ADDR, addr, data);
+#endif
+}
+
+static int pmic_bus_write(const u8 addr, u8 data)
+{
+#ifdef CONFIG_MACH_SUN6I
+       return p2wi_write(addr, data);
+#else
+       return rsb_write(AXP223_RUNTIME_ADDR, addr, data);
+#endif
+}
+
 static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
 {
        if (mvolt < min)
@@ -24,12 +70,25 @@ static int axp221_setbits(u8 reg, u8 bits)
        int ret;
        u8 val;
 
-       ret = p2wi_read(reg, &val);
+       ret = pmic_bus_read(reg, &val);
        if (ret)
                return ret;
 
        val |= bits;
-       return p2wi_write(reg, val);
+       return pmic_bus_write(reg, val);
+}
+
+static int axp221_clrbits(u8 reg, u8 bits)
+{
+       int ret;
+       u8 val;
+
+       ret = pmic_bus_read(reg, &val);
+       if (ret)
+               return ret;
+
+       val &= ~bits;
+       return pmic_bus_write(reg, val);
 }
 
 int axp221_set_dcdc1(unsigned int mvolt)
@@ -37,40 +96,89 @@ int axp221_set_dcdc1(unsigned int mvolt)
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
 
-       ret = p2wi_write(AXP221_DCDC1_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL1,
+                                     AXP221_OUTPUT_CTRL1_DCDC1_EN);
+
+       ret = pmic_bus_write(AXP221_DCDC1_CTRL, cfg);
        if (ret)
                return ret;
 
-       return axp221_setbits(AXP221_OUTPUT_CTRL2,
-                             AXP221_OUTPUT_CTRL2_DCDC1_EN);
+       ret = axp221_setbits(AXP221_OUTPUT_CTRL2,
+                            AXP221_OUTPUT_CTRL2_DCDC1SW_EN);
+       if (ret)
+               return ret;
+
+       return axp221_setbits(AXP221_OUTPUT_CTRL1,
+                             AXP221_OUTPUT_CTRL1_DCDC1_EN);
 }
 
 int axp221_set_dcdc2(unsigned int mvolt)
 {
+       int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
 
-       return p2wi_write(AXP221_DCDC2_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL1,
+                                     AXP221_OUTPUT_CTRL1_DCDC2_EN);
+
+       ret = pmic_bus_write(AXP221_DCDC2_CTRL, cfg);
+       if (ret)
+               return ret;
+
+       return axp221_setbits(AXP221_OUTPUT_CTRL1,
+                             AXP221_OUTPUT_CTRL1_DCDC2_EN);
 }
 
 int axp221_set_dcdc3(unsigned int mvolt)
 {
+       int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
 
-       return p2wi_write(AXP221_DCDC3_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL1,
+                                     AXP221_OUTPUT_CTRL1_DCDC3_EN);
+
+       ret = pmic_bus_write(AXP221_DCDC3_CTRL, cfg);
+       if (ret)
+               return ret;
+
+       return axp221_setbits(AXP221_OUTPUT_CTRL1,
+                             AXP221_OUTPUT_CTRL1_DCDC3_EN);
 }
 
 int axp221_set_dcdc4(unsigned int mvolt)
 {
+       int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
 
-       return p2wi_write(AXP221_DCDC4_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL1,
+                                     AXP221_OUTPUT_CTRL1_DCDC4_EN);
+
+       ret = pmic_bus_write(AXP221_DCDC4_CTRL, cfg);
+       if (ret)
+               return ret;
+
+       return axp221_setbits(AXP221_OUTPUT_CTRL1,
+                             AXP221_OUTPUT_CTRL1_DCDC4_EN);
 }
 
 int axp221_set_dcdc5(unsigned int mvolt)
 {
+       int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
 
-       return p2wi_write(AXP221_DCDC5_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL1,
+                                     AXP221_OUTPUT_CTRL1_DCDC5_EN);
+
+       ret = pmic_bus_write(AXP221_DCDC5_CTRL, cfg);
+       if (ret)
+               return ret;
+
+       return axp221_setbits(AXP221_OUTPUT_CTRL1,
+                             AXP221_OUTPUT_CTRL1_DCDC5_EN);
 }
 
 int axp221_set_dldo1(unsigned int mvolt)
@@ -78,7 +186,11 @@ int axp221_set_dldo1(unsigned int mvolt)
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_DLDO1_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL2,
+                                     AXP221_OUTPUT_CTRL2_DLDO1_EN);
+
+       ret = pmic_bus_write(AXP221_DLDO1_CTRL, cfg);
        if (ret)
                return ret;
 
@@ -91,7 +203,11 @@ int axp221_set_dldo2(unsigned int mvolt)
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_DLDO2_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL2,
+                                     AXP221_OUTPUT_CTRL2_DLDO2_EN);
+
+       ret = pmic_bus_write(AXP221_DLDO2_CTRL, cfg);
        if (ret)
                return ret;
 
@@ -104,7 +220,11 @@ int axp221_set_dldo3(unsigned int mvolt)
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_DLDO3_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL2,
+                                     AXP221_OUTPUT_CTRL2_DLDO3_EN);
+
+       ret = pmic_bus_write(AXP221_DLDO3_CTRL, cfg);
        if (ret)
                return ret;
 
@@ -117,7 +237,11 @@ int axp221_set_dldo4(unsigned int mvolt)
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_DLDO4_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL2,
+                                     AXP221_OUTPUT_CTRL2_DLDO4_EN);
+
+       ret = pmic_bus_write(AXP221_DLDO4_CTRL, cfg);
        if (ret)
                return ret;
 
@@ -130,7 +254,11 @@ int axp221_set_aldo1(unsigned int mvolt)
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_ALDO1_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL1,
+                                     AXP221_OUTPUT_CTRL1_ALDO1_EN);
+
+       ret = pmic_bus_write(AXP221_ALDO1_CTRL, cfg);
        if (ret)
                return ret;
 
@@ -143,7 +271,11 @@ int axp221_set_aldo2(unsigned int mvolt)
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_ALDO2_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL1,
+                                     AXP221_OUTPUT_CTRL1_ALDO2_EN);
+
+       ret = pmic_bus_write(AXP221_ALDO2_CTRL, cfg);
        if (ret)
                return ret;
 
@@ -156,7 +288,11 @@ int axp221_set_aldo3(unsigned int mvolt)
        int ret;
        u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
 
-       ret = p2wi_write(AXP221_ALDO3_CTRL, cfg);
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL3,
+                                     AXP221_OUTPUT_CTRL3_ALDO3_EN);
+
+       ret = pmic_bus_write(AXP221_ALDO3_CTRL, cfg);
        if (ret)
                return ret;
 
@@ -164,24 +300,61 @@ int axp221_set_aldo3(unsigned int mvolt)
                              AXP221_OUTPUT_CTRL3_ALDO3_EN);
 }
 
+int axp221_set_eldo(int eldo_num, unsigned int mvolt)
+{
+       int ret;
+       u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+       u8 addr, bits;
+
+       switch (eldo_num) {
+       case 3:
+               addr = AXP221_ELDO3_CTRL;
+               bits = AXP221_OUTPUT_CTRL2_ELDO3_EN;
+               break;
+       case 2:
+               addr = AXP221_ELDO2_CTRL;
+               bits = AXP221_OUTPUT_CTRL2_ELDO2_EN;
+               break;
+       case 1:
+               addr = AXP221_ELDO1_CTRL;
+               bits = AXP221_OUTPUT_CTRL2_ELDO1_EN;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       if (mvolt == 0)
+               return axp221_clrbits(AXP221_OUTPUT_CTRL2, bits);
+
+       ret = pmic_bus_write(addr, cfg);
+       if (ret)
+               return ret;
+
+       return axp221_setbits(AXP221_OUTPUT_CTRL2, bits);
+}
+
 int axp221_init(void)
 {
+       /* This cannot be 0 because it is used in SPL before BSS is ready */
+       static int needs_init = 1;
        u8 axp_chip_id;
        int ret;
 
-       p2wi_init();
-       ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
-                                      AXP221_INIT_DATA);
+       if (!needs_init)
+               return 0;
+
+       ret = pmic_bus_init();
        if (ret)
                return ret;
 
-       ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id);
+       ret = pmic_bus_read(AXP221_CHIP_ID, &axp_chip_id);
        if (ret)
                return ret;
 
        if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
                return -ENODEV;
 
+       needs_init = 0;
        return 0;
 }
 
@@ -194,20 +367,56 @@ int axp221_get_sid(unsigned int *sid)
        if (ret)
                return ret;
 
-       ret = p2wi_write(AXP221_PAGE, 1);
+       ret = pmic_bus_write(AXP221_PAGE, 1);
        if (ret)
                return ret;
 
        for (i = 0; i < 16; i++) {
-               ret = p2wi_read(AXP221_SID + i, &dest[i]);
+               ret = pmic_bus_read(AXP221_SID + i, &dest[i]);
                if (ret)
                        return ret;
        }
 
-       p2wi_write(AXP221_PAGE, 0);
+       pmic_bus_write(AXP221_PAGE, 0);
 
        for (i = 0; i < 4; i++)
                sid[i] = be32_to_cpu(sid[i]);
 
        return 0;
 }
+
+static int axp_drivebus_setup(void)
+{
+       int ret;
+
+       ret = axp221_init();
+       if (ret)
+               return ret;
+
+       /* Set N_VBUSEN pin to output / DRIVEBUS function */
+       return axp221_clrbits(AXP221_MISC_CTRL, AXP221_MISC_CTRL_N_VBUSEN_FUNC);
+}
+
+int axp_drivebus_enable(void)
+{
+       int ret;
+
+       ret = axp_drivebus_setup();
+       if (ret)
+               return ret;
+
+       /* Set DRIVEBUS high */
+       return axp221_setbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS);
+}
+
+int axp_drivebus_disable(void)
+{
+       int ret;
+
+       ret = axp_drivebus_setup();
+       if (ret)
+               return ret;
+
+       /* Set DRIVEBUS low */
+       return axp221_clrbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS);
+}