sunxi: power: add support for sy8106a driver

[oweals/u-boot.git] / drivers / power / Kconfig

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 10683a21d971eb9a06e817aa6437f6f9689315f4..adc64552e74ae75086a00ed1ffde3321f273d4f6 100644 (file)
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -48,6 +48,13 @@ config AXP818_POWER
        Say y here to enable support for the axp818 pmic found on
        A83T dev board.
 
+config SY8106A_POWER
+       boolean "SY8106A pmic support"
+       depends on MACH_SUN8I_H3
+       ---help---
+       Select this to enable support for the SY8106A pmic found on some
+       H3 boards.
+
 endchoice
 
 config AXP_DCDC1_VOLT
@@ -232,4 +239,13 @@ config AXP_ELDO3_VOLT
        1.2V for the SSD2828 chip (converter of parallel LCD interface
        into MIPI DSI).
 
+config SY8106A_VOUT1_VOLT
+       int "SY8106A pmic VOUT1 voltage"
+       depends on SY8106A_POWER
+       default 1200
+       ---help---
+       Set the voltage (mV) to program the SY8106A pmic VOUT1. This
+       is typically used to power the VDD-CPU and should be 1200mV.
+       Values can range from 680mV till 1950mV.
+
 endmenu