*/
#include <common.h>
+#include <pci.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <pci.h>
+#include <asm/pci.h>
/* Register addresses and such */
#define SH7751_BCR1 (vu_long *)0xFF800000
-#define SH7751_BCR2 (vu_short*)0xFF800004
+#define SH7751_BCR2 (vu_short *)0xFF800004
#define SH7751_WCR1 (vu_long *)0xFF800008
#define SH7751_WCR2 (vu_long *)0xFF80000C
#define SH7751_WCR3 (vu_long *)0xFF800010
#define SH7751_MCR (vu_long *)0xFF800014
-#define SH7751_BCR3 (vu_short*)0xFF800050
+#define SH7751_BCR3 (vu_short *)0xFF800050
#define SH7751_PCICONF0 (vu_long *)0xFE200000
#define SH7751_PCICONF1 (vu_long *)0xFE200004
#define SH7751_PCICONF2 (vu_long *)0xFE200008
#define SH7751_PCIPAR (vu_long *)0xFE2001C0
#define SH7751_PCIPDR (vu_long *)0xFE200220
-#define p4_in(addr) *(addr)
-#define p4_out(data,addr) *(addr) = (data)
+#define p4_in(addr) (*addr)
+#define p4_out(data, addr) (*addr) = (data)
/* Double word */
int pci_sh4_read_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 * value)
+ pci_dev_t dev, int offset, u32 *value)
{
u32 par_data = 0x80000000 | dev;
}
int pci_sh4_write_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 * value)
+ pci_dev_t dev, int offset, u32 value)
{
u32 par_data = 0x80000000 | dev;
/* Double-check some BSC config settings */
/* (Area 3 non-MPX 32-bit, PCI bus pins) */
if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) {
- printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1));
+ printf("SH7751_BCR1 value is wrong(0x%08X)\n",
+ (unsigned int)p4_in(SH7751_BCR1));
return 2;
}
if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) {
- printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+ printf("SH7751_BCR2 value is wrong(0x%08X)\n",
+ (unsigned int)p4_in(SH7751_BCR2));
return 3;
}
if (p4_in(SH7751_BCR2) & 0x01) {
- printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+ printf("SH7751_BCR2 value is wrong(0x%08X)\n",
+ (unsigned int)p4_in(SH7751_BCR2));
return 4;
}
/* Copy BSC registers into PCI BSC */
p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1);
- p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2);
- p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3);
+ p4_out(inw(SH7751_BCR2), SH7751_PCIBCR2);
+ p4_out(inw(SH7751_BCR3), SH7751_PCIBCR3);
p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1);
p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2);
p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3);