/*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
*
*/
#include <pci.h>
-#include <asm/immap_fsl_pci.h>
+#include <asm/io.h>
+#include <asm/fsl_pci.h>
+
+/* Freescale-specific PCI config registers */
+#define FSL_PCI_PBFR 0x44
+#define FSL_PCIE_CAP_ID 0x4c
+#define FSL_PCIE_CFG_RDY 0x4b0
+#define FSL_PROG_IF_AGENT 0x1
void pciauto_prescan_setup_bridge(struct pci_controller *hose,
pci_dev_t dev, int sub_bus);
pci_dev_t dev, int sub_bus);
void pciauto_config_init(struct pci_controller *hose);
-void fsl_pci_init(struct pci_controller *hose)
+#ifndef CONFIG_SYS_PCI_MEMORY_BUS
+#define CONFIG_SYS_PCI_MEMORY_BUS 0
+#endif
+
+#ifndef CONFIG_SYS_PCI_MEMORY_PHYS
+#define CONFIG_SYS_PCI_MEMORY_PHYS 0
+#endif
+
+#if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS)
+#define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024)
+#endif
+
+/* Setup one inbound ATMU window.
+ *
+ * We let the caller decide what the window size should be
+ */
+static void set_inbound_window(volatile pit_t *pi,
+ struct pci_region *r,
+ u64 size)
+{
+ u32 sz = (__ilog2_u64(size) - 1);
+ u32 flag = PIWAR_EN | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
+
+ out_be32(&pi->pitar, r->phys_start >> 12);
+ out_be32(&pi->piwbar, r->bus_start >> 12);
+#ifdef CONFIG_SYS_PCI_64BIT
+ out_be32(&pi->piwbear, r->bus_start >> 44);
+#else
+ out_be32(&pi->piwbear, 0);
+#endif
+ if (r->flags & PCI_REGION_PREFETCH)
+ flag |= PIWAR_PF;
+ out_be32(&pi->piwar, flag | sz);
+}
+
+int fsl_setup_hose(struct pci_controller *hose, unsigned long addr)
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr;
+
+ pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
+
+ return fsl_is_pci_agent(hose);
+}
+
+static int fsl_pci_setup_inbound_windows(struct pci_controller *hose,
+ u64 out_lo, u8 pcie_cap,
+ volatile pit_t *pi)
+{
+ struct pci_region *r = hose->regions + hose->region_count;
+ u64 sz = min((u64)gd->ram_size, (1ull << 32));
+
+ phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS;
+ pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS;
+ pci_size_t pci_sz;
+
+ /* we have no space available for inbound memory mapping */
+ if (bus_start > out_lo) {
+ printf ("no space for inbound mapping of memory\n");
+ return 0;
+ }
+
+ /* limit size */
+ if ((bus_start + sz) > out_lo) {
+ sz = out_lo - bus_start;
+ debug ("limiting size to %llx\n", sz);
+ }
+
+ pci_sz = 1ull << __ilog2_u64(sz);
+ /*
+ * we can overlap inbound/outbound windows on PCI-E since RX & TX
+ * links a separate
+ */
+ if ((pcie_cap == PCI_CAP_ID_EXP) && (pci_sz < sz)) {
+ debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)sz);
+ pci_set_region(r, bus_start, phys_start, sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+
+ /* if we aren't an exact power of two match, pci_sz is smaller
+ * round it up to the next power of two. We report the actual
+ * size to pci region tracking.
+ */
+ if (pci_sz != sz)
+ sz = 2ull << __ilog2_u64(sz);
+
+ set_inbound_window(pi--, r++, sz);
+ sz = 0; /* make sure we dont set the R2 window */
+ } else {
+ debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)pci_sz);
+ pci_set_region(r, bus_start, phys_start, pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
+
+ sz -= pci_sz;
+ bus_start += pci_sz;
+ phys_start += pci_sz;
+
+ pci_sz = 1ull << __ilog2_u64(sz);
+ if (sz) {
+ debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)pci_sz);
+ pci_set_region(r, bus_start, phys_start, pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
+ sz -= pci_sz;
+ bus_start += pci_sz;
+ phys_start += pci_sz;
+ }
+ }
+
+#if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT)
+ /*
+ * On 64-bit capable systems, set up a mapping for all of DRAM
+ * in high pci address space.
+ */
+ pci_sz = 1ull << __ilog2_u64(gd->ram_size);
+ /* round up to the next largest power of two */
+ if (gd->ram_size > pci_sz)
+ pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1);
+ debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)CONFIG_SYS_PCI64_MEMORY_BUS,
+ (u64)CONFIG_SYS_PCI_MEMORY_PHYS,
+ (u64)pci_sz);
+ pci_set_region(r,
+ CONFIG_SYS_PCI64_MEMORY_BUS,
+ CONFIG_SYS_PCI_MEMORY_PHYS,
+ pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
+#else
+ pci_sz = 1ull << __ilog2_u64(sz);
+ if (sz) {
+ debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)pci_sz);
+ pci_set_region(r, bus_start, phys_start, pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ sz -= pci_sz;
+ bus_start += pci_sz;
+ phys_start += pci_sz;
+ set_inbound_window(pi--, r++, pci_sz);
+ }
+#endif
+
+#ifdef CONFIG_PHYS_64BIT
+ if (sz && (((u64)gd->ram_size) < (1ull << 32)))
+ printf("Was not able to map all of memory via "
+ "inbound windows -- %lld remaining\n", sz);
+#endif
+
+ hose->region_count = r - hose->regions;
+
+ return 1;
+}
+
+void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
{
u16 temp16;
u32 temp32;
- int busno = hose->first_busno;
- int enabled;
+ int enabled, r, inbound = 0;
u16 ltssm;
- u8 temp8;
- int r;
- int bridge;
- int inbound = 0;
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
- pci_dev_t dev = PCI_BDF(busno,0,0);
+ u8 temp8, pcie_cap;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)cfg_addr;
+ struct pci_region *reg = hose->regions + hose->region_count;
+ pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
/* Initialize ATMU registers based on hose regions and flags */
volatile pot_t *po = &pci->pot[1]; /* skip 0 */
- volatile pit_t *pi = &pci->pit[0]; /* ranges from: 3 to 1 */
+ volatile pit_t *pi = &pci->pit[2]; /* ranges from: 3 to 1 */
+
+ u64 out_hi = 0, out_lo = -1ULL;
+ u32 pcicsrbar, pcicsrbar_sz;
#ifdef DEBUG
int neg_link_w;
#endif
- for (r=0; r<hose->region_count; r++) {
+ pci_setup_indirect(hose, cfg_addr, cfg_data);
+
+ /* Handle setup of outbound windows first */
+ for (r = 0; r < hose->region_count; r++) {
+ unsigned long flags = hose->regions[r].flags;
u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1);
- if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */
- u32 flag = PIWAR_EN | PIWAR_LOCAL | \
- PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
- pi->pitar = (hose->regions[r].phys_start >> 12);
- pi->piwbar = (hose->regions[r].bus_start >> 12);
-#ifdef CONFIG_SYS_PCI_64BIT
- pi->piwbear = (hose->regions[r].bus_start >> 44);
-#else
- pi->piwbear = 0;
-#endif
- if (hose->regions[r].flags & PCI_REGION_PREFETCH)
- flag |= PIWAR_PF;
- pi->piwar = flag | sz;
- pi++;
- inbound = hose->regions[r].size > 0;
- } else { /* Outbound */
- po->powbar = (hose->regions[r].phys_start >> 12);
- po->potar = (hose->regions[r].bus_start >> 12);
+
+ flags &= PCI_REGION_SYS_MEMORY|PCI_REGION_TYPE;
+ if (flags != PCI_REGION_SYS_MEMORY) {
+ u64 start = hose->regions[r].bus_start;
+ u64 end = start + hose->regions[r].size;
+
+ out_be32(&po->powbar, hose->regions[r].phys_start >> 12);
+ out_be32(&po->potar, start >> 12);
#ifdef CONFIG_SYS_PCI_64BIT
- po->potear = (hose->regions[r].bus_start >> 44);
+ out_be32(&po->potear, start >> 44);
#else
- po->potear = 0;
+ out_be32(&po->potear, 0);
#endif
- if (hose->regions[r].flags & PCI_REGION_IO)
- po->powar = POWAR_EN | sz | \
- POWAR_IO_READ | POWAR_IO_WRITE;
- else
- po->powar = POWAR_EN | sz | \
- POWAR_MEM_READ | POWAR_MEM_WRITE;
+ if (hose->regions[r].flags & PCI_REGION_IO) {
+ out_be32(&po->powar, POWAR_EN | sz |
+ POWAR_IO_READ | POWAR_IO_WRITE);
+ } else {
+ out_be32(&po->powar, POWAR_EN | sz |
+ POWAR_MEM_READ | POWAR_MEM_WRITE);
+ out_lo = min(start, out_lo);
+ out_hi = max(end, out_hi);
+ }
po++;
}
}
+ debug("Outbound memory range: %llx:%llx\n", out_lo, out_hi);
+
+ /* setup PCSRBAR/PEXCSRBAR */
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
+ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
+ pcicsrbar_sz = ~pcicsrbar_sz + 1;
+
+ if (out_hi < (0x100000000ull - pcicsrbar_sz) ||
+ (out_lo > 0x100000000ull))
+ pcicsrbar = 0x100000000ull - pcicsrbar_sz;
+ else
+ pcicsrbar = (out_lo - pcicsrbar_sz) & -pcicsrbar_sz;
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, pcicsrbar);
+
+ out_lo = min(out_lo, (u64)pcicsrbar);
+
+ debug("PCICSRBAR @ 0x%x\n", pcicsrbar);
+
+ pci_set_region(reg++, pcicsrbar, CONFIG_SYS_CCSRBAR_PHYS,
+ pcicsrbar_sz, PCI_REGION_SYS_MEMORY);
+ hose->region_count++;
+
+ /* see if we are a PCIe or PCI controller */
+ pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+
+ /* inbound */
+ inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi);
+
+ for (r = 0; r < hose->region_count; r++)
+ debug("PCI reg:%d %016llx:%016llx %016llx %08x\n", r,
+ (u64)hose->regions[r].phys_start,
+ hose->regions[r].bus_start,
+ hose->regions[r].size,
+ hose->regions[r].flags);
pci_register_hose(hose);
pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */
hose->current_busno = hose->first_busno;
- pci->pedr = 0xffffffff; /* Clear any errors */
- pci->peer = ~0x20140; /* Enable All Error Interupts except
+ out_be32(&pci->pedr, 0xffffffff); /* Clear any errors */
+ out_be32(&pci->peer, ~0x20140); /* Enable All Error Interupts except
* - Master abort (pci)
* - Master PERR (pci)
* - ICCA (PCIe)
*/
- pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32);
+ pci_hose_read_config_dword(hose, dev, PCI_DCR, &temp32);
temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */
pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32);
- pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8);
- bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */
-
- if ( bridge ) {
-
+ if (pcie_cap == PCI_CAP_ID_EXP) {
pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
enabled = ltssm >= PCI_LTSSM_L0;
#ifdef CONFIG_FSL_PCIE_RESET
if (ltssm == 1) {
int i;
- debug("....PCIe link error. "
- "LTSSM=0x%02x.", ltssm);
- pci->pdb_stat |= 0x08000000; /* assert PCIe reset */
- temp32 = pci->pdb_stat;
+ debug("....PCIe link error. " "LTSSM=0x%02x.", ltssm);
+ /* assert PCIe reset */
+ setbits_be32(&pci->pdb_stat, 0x08000000);
+ (void) in_be32(&pci->pdb_stat);
udelay(100);
debug(" Asserting PCIe reset @%x = %x\n",
- &pci->pdb_stat, pci->pdb_stat);
- pci->pdb_stat &= ~0x08000000; /* clear reset */
+ &pci->pdb_stat, in_be32(&pci->pdb_stat));
+ /* clear PCIe reset */
+ clrbits_be32(&pci->pdb_stat, 0x08000000);
asm("sync;isync");
for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
pci_hose_read_config_word(hose, dev, PCI_LTSSM,
"LTSSM=0x%02x.\n", ltssm);
}
enabled = ltssm >= PCI_LTSSM_L0;
+
+ /* we need to re-write the bar0 since a reset will
+ * clear it
+ */
+ pci_hose_write_config_dword(hose, dev,
+ PCI_BASE_ADDRESS_0, pcicsrbar);
}
#endif
return;
}
- pci->pme_msg_det = 0xffffffff;
- pci->pme_msg_int_en = 0xffffffff;
+ out_be32(&pci->pme_msg_det, 0xffffffff);
+ out_be32(&pci->pme_msg_int_en, 0xffffffff);
#ifdef DEBUG
pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16);
neg_link_w = (temp16 & 0x3f0 ) >> 4;
#endif
hose->current_busno++; /* Start scan with secondary */
pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
-
}
/* Use generic setup_device to initialize standard pci regs,
* but do not allocate any windows since any BAR found (such
* as PCSRBAR) is not in this cpu's memory space.
*/
-
pciauto_setup_device(hose, dev, 0, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
hose->last_busno = hose->current_busno;
}
- if ( bridge ) { /* update limit regs and subordinate busno */
+ /* if we are PCIe - update limit regs and subordinate busno
+ * for the virtual P2P bridge
+ */
+ if (pcie_cap == PCI_CAP_ID_EXP) {
pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
}
#else
#endif
/* Clear all error indications */
-
- if (bridge)
- pci->pme_msg_det = 0xffffffff;
- pci->pedr = 0xffffffff;
+ if (pcie_cap == PCI_CAP_ID_EXP)
+ out_be32(&pci->pme_msg_det, 0xffffffff);
+ out_be32(&pci->pedr, 0xffffffff);
pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16);
if (temp16) {
- pci_hose_write_config_word(hose, dev,
- PCI_DSR, 0xffff);
+ pci_hose_write_config_word(hose, dev, PCI_DSR, 0xffff);
}
pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
}
}
+
+int fsl_is_pci_agent(struct pci_controller *hose)
+{
+ u8 prog_if;
+ pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
+
+ pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+
+ return (prog_if == FSL_PROG_IF_AGENT);
+}
+
+int fsl_pci_init_port(struct fsl_pci_info *pci_info,
+ struct pci_controller *hose, int busno)
+{
+ volatile ccsr_fsl_pci_t *pci;
+ struct pci_region *r;
+
+ pci = (ccsr_fsl_pci_t *) pci_info->regs;
+
+ /* on non-PCIe controllers we don't have pme_msg_det so this code
+ * should do nothing since the read will return 0
+ */
+ if (in_be32(&pci->pme_msg_det)) {
+ out_be32(&pci->pme_msg_det, 0xffffffff);
+ debug (" with errors. Clearing. Now 0x%08x",
+ pci->pme_msg_det);
+ }
+
+ r = hose->regions + hose->region_count;
+
+ /* outbound memory */
+ pci_set_region(r++,
+ pci_info->mem_bus,
+ pci_info->mem_phys,
+ pci_info->mem_size,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(r++,
+ pci_info->io_bus,
+ pci_info->io_phys,
+ pci_info->io_size,
+ PCI_REGION_IO);
+
+ hose->region_count = r - hose->regions;
+ hose->first_busno = busno;
+
+ fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
+
+ if (fsl_is_pci_agent(hose)) {
+ fsl_pci_config_unlock(hose);
+ hose->last_busno = hose->first_busno;
+ }
+
+ printf(" PCIE%x on bus %02x - %02x\n", pci_info->pci_num,
+ hose->first_busno, hose->last_busno);
+
+ return(hose->last_busno + 1);
+}
+
+/* Enable inbound PCI config cycles for agent/endpoint interface */
+void fsl_pci_config_unlock(struct pci_controller *hose)
+{
+ pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
+ u8 agent;
+ u8 pcie_cap;
+ u16 pbfr;
+
+ pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent);
+ if (!agent)
+ return;
+
+ pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+ if (pcie_cap != 0x0) {
+ /* PCIe - set CFG_READY bit of Configuration Ready Register */
+ pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1);
+ } else {
+ /* PCI - clear ACL bit of PBFR */
+ pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);
+ pbfr &= ~0x20;
+ pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr);
+ }
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+ struct pci_controller *hose)
+{
+ int off = fdt_path_offset(blob, pci_alias);
+
+ if (off >= 0) {
+ u32 bus_range[2];
+
+ bus_range[0] = 0;
+ bus_range[1] = hose->last_busno - hose->first_busno;
+ fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4);
+ fdt_pci_dma_ranges(blob, off, hose);
+ }
+}
+#endif