#include <asm/system.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
-#include <asm-generic/errno.h>
+#include <linux/errno.h>
DECLARE_GLOBAL_DATA_PTR;
#define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */
#define ZYNQ_GEM_NWCTRL_STARTTX_MASK 0x00000200 /* Start tx (tx_go) */
-#define ZYNQ_GEM_NWCFG_SPEED100 0x000000001 /* 100 Mbps operation */
-#define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */
-#define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */
-#define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */
-#define ZYNQ_GEM_NWCFG_SGMII_ENBL 0x080000000 /* SGMII Enable */
-#define ZYNQ_GEM_NWCFG_PCS_SEL 0x000000800 /* PCS select */
+#define ZYNQ_GEM_NWCFG_SPEED100 0x00000001 /* 100 Mbps operation */
+#define ZYNQ_GEM_NWCFG_SPEED1000 0x00000400 /* 1Gbps operation */
+#define ZYNQ_GEM_NWCFG_FDEN 0x00000002 /* Full Duplex mode */
+#define ZYNQ_GEM_NWCFG_FSREM 0x00020000 /* FCS removal */
+#define ZYNQ_GEM_NWCFG_SGMII_ENBL 0x08000000 /* SGMII Enable */
+#define ZYNQ_GEM_NWCFG_PCS_SEL 0x00000800 /* PCS select */
#ifdef CONFIG_ARM64
-#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000100000 /* Div pclk by 64, max 160MHz */
+#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x00100000 /* Div pclk by 64, max 160MHz */
#else
-#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x0000c0000 /* Div pclk by 48, max 120MHz */
+#define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000c0000 /* Div pclk by 48, max 120MHz */
#endif
#ifdef CONFIG_ARM64
if (priv->phy_of_handle > 0)
priv->phydev->dev->of_offset = priv->phy_of_handle;
- phy_config(priv->phydev);
-
- return 0;
+ return phy_config(priv->phydev);
}
static int zynq_gem_init(struct udevice *dev)
{
u32 i, nwconfig;
+ int ret;
unsigned long clk_rate = 0;
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct zynq_gem_regs *regs = priv->iobase;
priv->init++;
}
- phy_startup(priv->phydev);
+ ret = phy_startup(priv->phydev);
+ if (ret)
+ return ret;
if (!priv->phydev->link) {
printf("%s: No link.\n", priv->phydev->dev->name);