* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004-2011 Freescale Semiconductor, Inc.
+ * Copyright 2004-2011, 2013 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* author Andy Fleming
*
#include <tsec.h>
#include <fsl_mdio.h>
#include <asm/errno.h>
+#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
rxbd8_t rxbd[PKTBUFSRX];
} RTXBD;
-#define MAXCONTROLLERS (8)
-
-static struct tsec_private *privlist[MAXCONTROLLERS];
-static int num_tsecs = 0;
-
#ifdef __GNUC__
static RTXBD rtx __attribute__ ((aligned(8)));
#else
#error "rtx must be 64-bit aligned"
#endif
+static int tsec_send(struct eth_device *dev, void *packet, int length);
+
/* Default initializations for TSEC controllers. */
static struct tsec_info_struct tsec_info[] = {
#endif
#ifdef CONFIG_MPC85XX_FEC
{
- .regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
+ .regs = TSEC_GET_REGS(2, 0x2000),
.devname = CONFIG_MPC85XX_FEC_NAME,
.phyaddr = FEC_PHY_ADDR,
.flags = FEC_FLAGS,
* result.
* 2) Use the 8 most significant bits as a hash into a 256-entry
* table. The table is controlled through 8 32-bit registers:
- * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is
- * gaddr7. This means that the 3 most significant bits in the
+ * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is entry
+ * 255. This means that the 3 most significant bits in the
* hash index which gaddr register to use, and the 5 other bits
* indicate which bit (assuming an IBM numbering scheme, which
- * for PowerPC (tm) is usually the case) in the tregister holds
+ * for PowerPC (tm) is usually the case) in the register holds
* the entry. */
static int
-tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
+tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set)
{
- struct tsec_private *priv = privlist[1];
- volatile tsec_t *regs = priv->regs;
- volatile u32 *reg_array, value;
- u8 result, whichbit, whichreg;
-
- result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff);
- whichbit = result & 0x1f; /* the 5 LSB = which bit to set */
- whichreg = result >> 5; /* the 3 MSB = which reg to set it in */
- value = (1 << (31-whichbit));
-
- reg_array = &(regs->hash.gaddr0);
-
- if (set) {
- reg_array[whichreg] |= value;
- } else {
- reg_array[whichreg] &= ~value;
- }
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ struct tsec __iomem *regs = priv->regs;
+ u32 result, value;
+ u8 whichbit, whichreg;
+
+ result = ether_crc(MAC_ADDR_LEN, mcast_mac);
+ whichbit = (result >> 24) & 0x1f; /* the 5 LSB = which bit to set */
+ whichreg = result >> 29; /* the 3 MSB = which reg to set it in */
+
+ value = 1 << (31-whichbit);
+
+ if (set)
+ setbits_be32(®s->hash.gaddr0 + whichreg, value);
+ else
+ clrbits_be32(®s->hash.gaddr0 + whichreg, value);
+
return 0;
}
#endif /* Multicast TFTP ? */
* those we don't care about (unless zero is bad, in which case,
* choose a more appropriate value)
*/
-static void init_registers(tsec_t *regs)
+static void init_registers(struct tsec __iomem *regs)
{
/* Clear IEVENT */
out_be32(®s->ievent, IEVENT_INIT_CLEAR);
*/
static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
{
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
u32 ecntrl, maccfg2;
if (!phydev->link) {
(phydev->port == PORT_FIBRE) ? ", fiber mode" : "");
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
+/*
+ * When MACCFG1[Rx_EN] is enabled during system boot as part
+ * of the eTSEC port initialization sequence,
+ * the eTSEC Rx logic may not be properly initialized.
+ */
+void redundant_init(struct eth_device *dev)
+{
+ struct tsec_private *priv = dev->priv;
+ struct tsec __iomem *regs = priv->regs;
+ uint t, count = 0;
+ int fail = 1;
+ static const u8 pkt[] = {
+ 0x00, 0x1e, 0x4f, 0x12, 0xcb, 0x2c, 0x00, 0x25,
+ 0x64, 0xbb, 0xd1, 0xab, 0x08, 0x00, 0x45, 0x00,
+ 0x00, 0x5c, 0xdd, 0x22, 0x00, 0x00, 0x80, 0x01,
+ 0x1f, 0x71, 0x0a, 0xc1, 0x14, 0x22, 0x0a, 0xc1,
+ 0x14, 0x6a, 0x08, 0x00, 0xef, 0x7e, 0x02, 0x00,
+ 0x94, 0x05, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66,
+ 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e,
+ 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76,
+ 0x77, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
+ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
+ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
+ 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68,
+ 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70,
+ 0x71, 0x72};
+
+ /* Enable promiscuous mode */
+ setbits_be32(®s->rctrl, 0x8);
+ /* Enable loopback mode */
+ setbits_be32(®s->maccfg1, MACCFG1_LOOPBACK);
+ /* Enable transmit and receive */
+ setbits_be32(®s->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
+
+ /* Tell the DMA it is clear to go */
+ setbits_be32(®s->dmactrl, DMACTRL_INIT_SETTINGS);
+ out_be32(®s->tstat, TSTAT_CLEAR_THALT);
+ out_be32(®s->rstat, RSTAT_CLEAR_RHALT);
+ clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
+
+ do {
+ tsec_send(dev, (void *)pkt, sizeof(pkt));
+
+ /* Wait for buffer to be received */
+ for (t = 0; rtx.rxbd[rxIdx].status & RXBD_EMPTY; t++) {
+ if (t >= 10 * TOUT_LOOP) {
+ printf("%s: tsec: rx error\n", dev->name);
+ break;
+ }
+ }
+
+ if (!memcmp(pkt, (void *)NetRxPackets[rxIdx], sizeof(pkt)))
+ fail = 0;
+
+ rtx.rxbd[rxIdx].length = 0;
+ rtx.rxbd[rxIdx].status =
+ RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
+ rxIdx = (rxIdx + 1) % PKTBUFSRX;
+
+ if (in_be32(®s->ievent) & IEVENT_BSY) {
+ out_be32(®s->ievent, IEVENT_BSY);
+ out_be32(®s->rstat, RSTAT_CLEAR_RHALT);
+ }
+ if (fail) {
+ printf("loopback recv packet error!\n");
+ clrbits_be32(®s->maccfg1, MACCFG1_RX_EN);
+ udelay(1000);
+ setbits_be32(®s->maccfg1, MACCFG1_RX_EN);
+ }
+ } while ((count++ < 4) && (fail == 1));
+
+ if (fail)
+ panic("eTSEC init fail!\n");
+ /* Disable promiscuous mode */
+ clrbits_be32(®s->rctrl, 0x8);
+ /* Disable loopback mode */
+ clrbits_be32(®s->maccfg1, MACCFG1_LOOPBACK);
+}
+#endif
+
/* Set up the buffers and their descriptors, and bring up the
* interface
*/
{
int i;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
/* reset the indices to zero */
rxIdx = 0;
txIdx = 0;
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
+ uint svr;
+#endif
/* Point to the buffer descriptors */
out_be32(®s->tbase, (unsigned int)(&rtx.txbd[txIdx]));
}
rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
+ svr = get_svr();
+ if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
+ redundant_init(dev);
+#endif
/* Enable Transmit and Receive */
setbits_be32(®s->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
* do the same. Presumably, this would be zero if there were no
* errors
*/
-static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
+static int tsec_send(struct eth_device *dev, void *packet, int length)
{
int i;
int result = 0;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
/* Find an empty buffer descriptor */
for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
{
int length;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
static void tsec_halt(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
setbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
char tmpbuf[MAC_ADDR_LEN];
int i;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
+ int ret;
/* Make sure the controller is stopped */
tsec_halt(dev);
startup_tsec(dev);
/* Start up the PHY */
- phy_startup(priv->phydev);
+ ret = phy_startup(priv->phydev);
+ if (ret) {
+ printf("Could not initialize PHY %s\n",
+ priv->phydev->dev->name);
+ return ret;
+ }
adjust_link(priv, priv->phydev);
static phy_interface_t tsec_get_interface(struct tsec_private *priv)
{
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
u32 ecntrl;
ecntrl = in_be32(®s->ecntrl);
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct phy_device *phydev;
- tsec_t *regs = priv->regs;
+ struct tsec __iomem *regs = priv->regs;
u32 supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
if (NULL == priv)
return 0;
- privlist[num_tsecs++] = priv;
priv->regs = tsec_info->regs;
priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
{
struct fsl_pq_mdio_info info;
- info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ info.regs = TSEC_GET_MDIO_REGS_BASE(1);
info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &info);
return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
}
-
projects / oweals / u-boot.git / blobdiff