+// SPDX-License-Identifier: GPL-2.0+
/*
* RealTek PHY drivers
*
- * SPDX-License-Identifier: GPL-2.0+
- *
* Copyright 2010-2011, 2015 Freescale Semiconductor, Inc.
* author Andy Fleming
* Copyright 2016 Karsten Merker <merker@debian.org>
*/
-#include <config.h>
#include <common.h>
#include <linux/bitops.h>
#include <phy.h>
+#define PHY_RTL8211x_FORCE_MASTER BIT(1)
+#define PHY_RTL8211E_PINE64_GIGABIT_FIX BIT(2)
+#define PHY_RTL8211F_FORCE_EEE_RXC_ON BIT(3)
+
#define PHY_AUTONEGOTIATE_TIMEOUT 5000
/* RTL8211x 1000BASE-T Control Register */
#define MIIM_RTL8211F_PHYSTAT_SPDDONE 0x0800
#define MIIM_RTL8211F_PHYSTAT_LINK 0x0004
+#define MIIM_RTL8211E_CONFREG 0x1c
+#define MIIM_RTL8211E_CONFREG_TXD 0x0002
+#define MIIM_RTL8211E_CONFREG_RXD 0x0004
+#define MIIM_RTL8211E_CONFREG_MAGIC 0xb400 /* Undocumented */
+
+#define MIIM_RTL8211E_EXT_PAGE_SELECT 0x1e
+
#define MIIM_RTL8211F_PAGE_SELECT 0x1f
#define MIIM_RTL8211F_TX_DELAY 0x100
#define MIIM_RTL8211F_LCR 0x10
+static int rtl8211f_phy_extread(struct phy_device *phydev, int addr,
+ int devaddr, int regnum)
+{
+ int oldpage = phy_read(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211F_PAGE_SELECT);
+ int val;
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, devaddr);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, regnum);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, oldpage);
+
+ return val;
+}
+
+static int rtl8211f_phy_extwrite(struct phy_device *phydev, int addr,
+ int devaddr, int regnum, u16 val)
+{
+ int oldpage = phy_read(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211F_PAGE_SELECT);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, devaddr);
+ phy_write(phydev, MDIO_DEVAD_NONE, regnum, val);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, oldpage);
+
+ return 0;
+}
+
+static int rtl8211b_probe(struct phy_device *phydev)
+{
+#ifdef CONFIG_RTL8211X_PHY_FORCE_MASTER
+ phydev->flags |= PHY_RTL8211x_FORCE_MASTER;
+#endif
+
+ return 0;
+}
+
+static int rtl8211e_probe(struct phy_device *phydev)
+{
+#ifdef CONFIG_RTL8211E_PINE64_GIGABIT_FIX
+ phydev->flags |= PHY_RTL8211E_PINE64_GIGABIT_FIX;
+#endif
+
+ return 0;
+}
+
+static int rtl8211f_probe(struct phy_device *phydev)
+{
+#ifdef CONFIG_RTL8211F_PHY_FORCE_EEE_RXC_ON
+ phydev->flags |= PHY_RTL8211F_FORCE_EEE_RXC_ON;
+#endif
+
+ return 0;
+}
+
/* RealTek RTL8211x */
static int rtl8211x_config(struct phy_device *phydev)
{
*/
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER,
MIIM_RTL8211x_PHY_INTR_DIS);
-#ifdef CONFIG_RTL8211X_PHY_FORCE_MASTER
- unsigned int reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
- /* force manual master/slave configuration */
- reg |= MIIM_RTL8211x_CTRL1000T_MSCE;
- /* force master mode */
- reg |= MIIM_RTL8211x_CTRL1000T_MASTER;
- phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg);
-#endif
+
+ if (phydev->flags & PHY_RTL8211x_FORCE_MASTER) {
+ unsigned int reg;
+
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
+ /* force manual master/slave configuration */
+ reg |= MIIM_RTL8211x_CTRL1000T_MSCE;
+ /* force master mode */
+ reg |= MIIM_RTL8211x_CTRL1000T_MASTER;
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg);
+ }
+ if (phydev->flags & PHY_RTL8211E_PINE64_GIGABIT_FIX) {
+ unsigned int reg;
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT,
+ 7);
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211E_EXT_PAGE_SELECT, 0xa4);
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG);
+ /* Ensure both internal delays are turned off */
+ reg &= ~(MIIM_RTL8211E_CONFREG_TXD | MIIM_RTL8211E_CONFREG_RXD);
+ /* Flip the magic undocumented bits */
+ reg |= MIIM_RTL8211E_CONFREG_MAGIC;
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG, reg);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT,
+ 0);
+ }
/* read interrupt status just to clear it */
phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER);
{
u16 reg;
+ if (phydev->flags & PHY_RTL8211F_FORCE_EEE_RXC_ON) {
+ unsigned int reg;
+
+ reg = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
+ reg &= ~MDIO_PCS_CTRL1_CLKSTOP_EN;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+ }
+
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
- /* enable TXDLY */
- phy_write(phydev, MDIO_DEVAD_NONE,
- MIIM_RTL8211F_PAGE_SELECT, 0xd08);
- reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x11);
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211F_PAGE_SELECT, 0xd08);
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x11);
+
+ /* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
reg |= MIIM_RTL8211F_TX_DELAY;
- phy_write(phydev, MDIO_DEVAD_NONE, 0x11, reg);
- /* restore to default page 0 */
- phy_write(phydev, MDIO_DEVAD_NONE,
- MIIM_RTL8211F_PAGE_SELECT, 0x0);
- }
+ else
+ reg &= ~MIIM_RTL8211F_TX_DELAY;
+
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x11, reg);
+ /* restore to default page 0 */
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211F_PAGE_SELECT, 0x0);
/* Set green LED for Link, yellow LED for Active */
phy_write(phydev, MDIO_DEVAD_NONE,
.uid = 0x1cc912,
.mask = 0xffffff,
.features = PHY_GBIT_FEATURES,
+ .probe = &rtl8211b_probe,
.config = &rtl8211x_config,
.startup = &rtl8211x_startup,
.shutdown = &genphy_shutdown,
.uid = 0x1cc915,
.mask = 0xffffff,
.features = PHY_GBIT_FEATURES,
+ .probe = &rtl8211e_probe,
.config = &rtl8211x_config,
.startup = &rtl8211e_startup,
.shutdown = &genphy_shutdown,
.uid = 0x1cc916,
.mask = 0xffffff,
.features = PHY_GBIT_FEATURES,
+ .probe = &rtl8211f_probe,
.config = &rtl8211f_config,
.startup = &rtl8211f_startup,
.shutdown = &genphy_shutdown,
+ .readext = &rtl8211f_phy_extread,
+ .writeext = &rtl8211f_phy_extwrite,
};
int phy_realtek_init(void)
projects / oweals / u-boot.git / blobdiff