Merge git://git.denx.de/u-boot-spi

[oweals/u-boot.git] / drivers / net / phy / realtek.c

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index bba48da4099fda91558008d77e19bf373cfc7341..6d917f86f44d21537ffdd228316ec7e9ee86f9dc 100644 (file)
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -5,13 +5,21 @@
  *
  * Copyright 2010-2011, 2015 Freescale Semiconductor, Inc.
  * author Andy Fleming
+ * Copyright 2016 Karsten Merker <merker@debian.org>
  */
 #include <config.h>
 #include <common.h>
+#include <linux/bitops.h>
 #include <phy.h>
 
+#define PHY_RTL8211x_FORCE_MASTER BIT(1)
+
 #define PHY_AUTONEGOTIATE_TIMEOUT 5000
 
+/* RTL8211x 1000BASE-T Control Register */
+#define MIIM_RTL8211x_CTRL1000T_MSCE BIT(12);
+#define MIIM_RTL8211x_CTRL1000T_MASTER BIT(11);
+
 /* RTL8211x PHY Status Register */
 #define MIIM_RTL8211x_PHY_STATUS       0x11
 #define MIIM_RTL8211x_PHYSTAT_SPEED    0xc000
@@ -43,6 +51,15 @@
 #define MIIM_RTL8211F_TX_DELAY         0x100
 #define MIIM_RTL8211F_LCR              0x10
 
+static int rtl8211b_probe(struct phy_device *phydev)
+{
+#ifdef CONFIG_RTL8211X_PHY_FORCE_MASTER
+       phydev->flags |= PHY_RTL8211x_FORCE_MASTER;
+#endif
+
+       return 0;
+}
+
 /* RealTek RTL8211x */
 static int rtl8211x_config(struct phy_device *phydev)
 {
@@ -54,6 +71,16 @@ static int rtl8211x_config(struct phy_device *phydev)
        phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER,
                  MIIM_RTL8211x_PHY_INTR_DIS);
 
+       if (phydev->flags & PHY_RTL8211x_FORCE_MASTER) {
+               unsigned int reg;
+
+               reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
+               /* force manual master/slave configuration */
+               reg |= MIIM_RTL8211x_CTRL1000T_MSCE;
+               /* force master mode */
+               reg |= MIIM_RTL8211x_CTRL1000T_MASTER;
+               phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg);
+       }
        /* read interrupt status just to clear it */
        phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER);
 
@@ -68,17 +95,21 @@ static int rtl8211f_config(struct phy_device *phydev)
 
        phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
 
-       if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
-               /* enable TXDLY */
-               phy_write(phydev, MDIO_DEVAD_NONE,
-                         MIIM_RTL8211F_PAGE_SELECT, 0xd08);
-               reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x11);
+       phy_write(phydev, MDIO_DEVAD_NONE,
+                 MIIM_RTL8211F_PAGE_SELECT, 0xd08);
+       reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x11);
+
+       /* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
                reg |= MIIM_RTL8211F_TX_DELAY;
-               phy_write(phydev, MDIO_DEVAD_NONE, 0x11, reg);
-               /* restore to default page 0 */
-               phy_write(phydev, MDIO_DEVAD_NONE,
-                         MIIM_RTL8211F_PAGE_SELECT, 0x0);
-       }
+       else
+               reg &= ~MIIM_RTL8211F_TX_DELAY;
+
+       phy_write(phydev, MDIO_DEVAD_NONE, 0x11, reg);
+       /* restore to default page 0 */
+       phy_write(phydev, MDIO_DEVAD_NONE,
+                 MIIM_RTL8211F_PAGE_SELECT, 0x0);
 
        /* Set green LED for Link, yellow LED for Active */
        phy_write(phydev, MDIO_DEVAD_NONE,
@@ -196,28 +227,47 @@ static int rtl8211f_parse_status(struct phy_device *phydev)
 
 static int rtl8211x_startup(struct phy_device *phydev)
 {
+       int ret;
+
        /* Read the Status (2x to make sure link is right) */
-       genphy_update_link(phydev);
-       rtl8211x_parse_status(phydev);
+       ret = genphy_update_link(phydev);
+       if (ret)
+               return ret;
 
-       return 0;
+       return rtl8211x_parse_status(phydev);
+}
+
+static int rtl8211e_startup(struct phy_device *phydev)
+{
+       int ret;
+
+       ret = genphy_update_link(phydev);
+       if (ret)
+               return ret;
+
+       return genphy_parse_link(phydev);
 }
 
 static int rtl8211f_startup(struct phy_device *phydev)
 {
+       int ret;
+
+       /* Read the Status (2x to make sure link is right) */
+       ret = genphy_update_link(phydev);
+       if (ret)
+               return ret;
        /* Read the Status (2x to make sure link is right) */
-       genphy_update_link(phydev);
-       rtl8211f_parse_status(phydev);
 
-       return 0;
+       return rtl8211f_parse_status(phydev);
 }
 
 /* Support for RTL8211B PHY */
 static struct phy_driver RTL8211B_driver = {
        .name = "RealTek RTL8211B",
-       .uid = 0x1cc910,
+       .uid = 0x1cc912,
        .mask = 0xffffff,
        .features = PHY_GBIT_FEATURES,
+       .probe = &rtl8211b_probe,
        .config = &rtl8211x_config,
        .startup = &rtl8211x_startup,
        .shutdown = &genphy_shutdown,
@@ -230,7 +280,7 @@ static struct phy_driver RTL8211E_driver = {
        .mask = 0xffffff,
        .features = PHY_GBIT_FEATURES,
        .config = &rtl8211x_config,
-       .startup = &rtl8211x_startup,
+       .startup = &rtl8211e_startup,
        .shutdown = &genphy_shutdown,
 };