Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

[oweals/u-boot.git] / drivers / net / phy / micrel.c

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 507b9a368be72e6d24fea6da9f169cbc2c4cb579..5e49666bbb34e1a12d748db7a8c1107828311f78 100644 (file)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -22,6 +22,111 @@ static struct phy_driver KSZ804_driver = {
        .shutdown = &genphy_shutdown,
 };
 
+static struct phy_driver KSZ8031_driver = {
+       .name = "Micrel KSZ8021/KSZ8031",
+       .uid = 0x221550,
+       .mask = 0xfffff0,
+       .features = PHY_BASIC_FEATURES,
+       .config = &genphy_config,
+       .startup = &genphy_startup,
+       .shutdown = &genphy_shutdown,
+};
+
+/**
+ * KSZ8051
+ */
+#define MII_KSZ8051_PHY_OMSO                   0x16
+#define MII_KSZ8051_PHY_OMSO_NAND_TREE_ON      (1 << 5)
+
+static int ksz8051_config(struct phy_device *phydev)
+{
+       unsigned val;
+
+       /* Disable NAND-tree */
+       val = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO);
+       val &= ~MII_KSZ8051_PHY_OMSO_NAND_TREE_ON;
+       phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ8051_PHY_OMSO, val);
+
+       return genphy_config(phydev);
+}
+
+static struct phy_driver KSZ8051_driver = {
+       .name = "Micrel KSZ8051",
+       .uid = 0x221550,
+       .mask = 0xfffff0,
+       .features = PHY_BASIC_FEATURES,
+       .config = &ksz8051_config,
+       .startup = &genphy_startup,
+       .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver KSZ8081_driver = {
+       .name = "Micrel KSZ8081",
+       .uid = 0x221560,
+       .mask = 0xfffff0,
+       .features = PHY_BASIC_FEATURES,
+       .config = &genphy_config,
+       .startup = &genphy_startup,
+       .shutdown = &genphy_shutdown,
+};
+
+/**
+ * KSZ8895
+ */
+
+static unsigned short smireg_to_phy(unsigned short reg)
+{
+       return ((reg & 0xc0) >> 3) + 0x06 + ((reg & 0x20) >> 5);
+}
+
+static unsigned short smireg_to_reg(unsigned short reg)
+{
+       return reg & 0x1F;
+}
+
+static void ksz8895_write_smireg(struct phy_device *phydev, int smireg, int val)
+{
+       phydev->bus->write(phydev->bus, smireg_to_phy(smireg), MDIO_DEVAD_NONE,
+                                               smireg_to_reg(smireg), val);
+}
+
+#if 0
+static int ksz8895_read_smireg(struct phy_device *phydev, int smireg)
+{
+       return phydev->bus->read(phydev->bus, smireg_to_phy(smireg),
+                                       MDIO_DEVAD_NONE, smireg_to_reg(smireg));
+}
+#endif
+
+int ksz8895_config(struct phy_device *phydev)
+{
+       /* we are connected directly to the switch without
+        * dedicated PHY. SCONF1 == 001 */
+       phydev->link = 1;
+       phydev->duplex = DUPLEX_FULL;
+       phydev->speed = SPEED_100;
+
+       /* Force the switch to start */
+       ksz8895_write_smireg(phydev, 1, 1);
+
+       return 0;
+}
+
+static int ksz8895_startup(struct phy_device *phydev)
+{
+       return 0;
+}
+
+static struct phy_driver ksz8895_driver = {
+       .name = "Micrel KSZ8895/KSZ8864",
+       .uid  = 0x221450,
+       .mask = 0xffffe1,
+       .features = PHY_BASIC_FEATURES,
+       .config   = &ksz8895_config,
+       .startup  = &ksz8895_startup,
+       .shutdown = &genphy_shutdown,
+};
+
 #ifndef CONFIG_PHY_MICREL_KSZ9021
 /*
  * I can't believe Micrel used the exact same part number
@@ -215,11 +320,15 @@ static struct phy_driver ksz9031_driver = {
 int phy_micrel_init(void)
 {
        phy_register(&KSZ804_driver);
+       phy_register(&KSZ8031_driver);
+       phy_register(&KSZ8051_driver);
+       phy_register(&KSZ8081_driver);
 #ifdef CONFIG_PHY_MICREL_KSZ9021
        phy_register(&ksz9021_driver);
 #else
        phy_register(&KS8721_driver);
 #endif
        phy_register(&ksz9031_driver);
+       phy_register(&ksz8895_driver);
        return 0;
 }