net: phy: marvell: Unify 88E151x series phy_driver

[oweals/u-boot.git] / drivers / net / phy / marvell.c

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index efbbd31ff71ba1df73a07b2be1469d58768316ca..93cf44ad4cbd205f8390316c12133c02570493ed 100644 (file)
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -303,9 +303,9 @@ static int m88e1111s_config(struct phy_device *phydev)
 }
 
 /**
- * m88e1518_phy_writebits - write bits to a register
+ * m88e151x_phy_writebits - write bits to a register
  */
-void m88e1518_phy_writebits(struct phy_device *phydev,
+void m88e151x_phy_writebits(struct phy_device *phydev,
                            u8 reg_num, u16 offset, u16 len, u16 data)
 {
        u16 reg, mask;
@@ -323,7 +323,7 @@ void m88e1518_phy_writebits(struct phy_device *phydev,
        phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg);
 }
 
-static int m88e1518_config(struct phy_device *phydev)
+static int m88e151x_config(struct phy_device *phydev)
 {
        u16 reg;
 
@@ -350,11 +350,11 @@ static int m88e1518_config(struct phy_device *phydev)
                phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 18);
 
                /* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */
-               m88e1518_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL,
+               m88e151x_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL,
                                       0, 3, MIIM_88E151x_MODE_SGMII);
 
                /* PHY reset is necessary after changing MODE[2:0] */
-               m88e1518_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL,
+               m88e151x_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL,
                                       MIIM_88E151x_RESET_OFFS, 1, 1);
 
                /* Reset page selection */
@@ -401,33 +401,6 @@ static int m88e1518_config(struct phy_device *phydev)
        return 0;
 }
 
-/* Marvell 88E1510 */
-static int m88e1510_config(struct phy_device *phydev)
-{
-       /* Select page 3 */
-       phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE,
-                 MIIM_88E1118_PHY_LED_PAGE);
-
-       /* Enable INTn output on LED[2] */
-       m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_TIMER_CTRL,
-                              MIIM_88E151x_INT_EN_OFFS, 1, 1);
-
-       /* Configure LEDs */
-       /* LED[0]:0011 (ACT) */
-       m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_FUNC_CTRL,
-                              MIIM_88E151x_LED0_OFFS, MIIM_88E151x_LED_FLD_SZ,
-                              MIIM_88E151x_LED0_ACT);
-       /* LED[1]:0110 (LINK 100/1000 Mbps) */
-       m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_FUNC_CTRL,
-                              MIIM_88E151x_LED1_OFFS, MIIM_88E151x_LED_FLD_SZ,
-                              MIIM_88E151x_LED1_100_1000_LINK);
-
-       /* Reset page selection */
-       phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0);
-
-       return m88e1518_config(phydev);
-}
-
 /* Marvell 88E1118 */
 static int m88e1118_config(struct phy_device *phydev)
 {
@@ -685,29 +658,12 @@ static struct phy_driver M88E1149S_driver = {
        .shutdown = &genphy_shutdown,
 };
 
-static struct phy_driver M88E1510_driver = {
-       .name = "Marvell 88E1510",
-       .uid = 0x1410dd0,
-       .mask = 0xfffffff,
-       .features = PHY_GBIT_FEATURES,
-       .config = &m88e1510_config,
-       .startup = &m88e1011s_startup,
-       .shutdown = &genphy_shutdown,
-       .readext = &m88e1xxx_phy_extread,
-       .writeext = &m88e1xxx_phy_extwrite,
-};
-
-/*
- * This supports:
- *  88E1518, uid 0x1410dd1
- *  88E1512, uid 0x1410dd4
- */
-static struct phy_driver M88E1518_driver = {
-       .name = "Marvell 88E1518",
+static struct phy_driver M88E151x_driver = {
+       .name = "Marvell 88E151x",
        .uid = 0x1410dd0,
-       .mask = 0xffffffa,
+       .mask = 0xffffff0,
        .features = PHY_GBIT_FEATURES,
-       .config = &m88e1518_config,
+       .config = &m88e151x_config,
        .startup = &m88e1011s_startup,
        .shutdown = &genphy_shutdown,
        .readext = &m88e1xxx_phy_extread,
@@ -744,8 +700,7 @@ int phy_marvell_init(void)
        phy_register(&M88E1118R_driver);
        phy_register(&M88E1111S_driver);
        phy_register(&M88E1011S_driver);
-       phy_register(&M88E1510_driver);
-       phy_register(&M88E1518_driver);
+       phy_register(&M88E151x_driver);
        phy_register(&M88E1680_driver);
 
        return 0;