serial: add BCM283x mini UART driver

[oweals/u-boot.git] / drivers / net / pcnet.c

diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
index cfcb1b4e23326babd16ec1940cb3620cc5c5f65a..16a7512b0c50d9660a17fb995244ffddf37cf4b6 100644 (file)
--- a/drivers/net/pcnet.c
+++ b/drivers/net/pcnet.c
@@ -134,8 +134,17 @@ static int pcnet_recv (struct eth_device *dev);
 static void pcnet_halt (struct eth_device *dev);
 static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_num);
 
-#define PCI_TO_MEM(d, a) pci_virt_to_mem((pci_dev_t)d->priv, (a))
-#define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a)))
+static inline pci_addr_t pcnet_virt_to_mem(const struct eth_device *dev,
+                                               void *addr, bool uncached)
+{
+       pci_dev_t devbusfn = (pci_dev_t)dev->priv;
+       void *virt_addr = addr;
+
+       if (uncached)
+               virt_addr = (void *)CKSEG0ADDR(addr);
+
+       return pci_virt_to_mem(devbusfn, virt_addr);
+}
 
 static struct pci_device_id supported[] = {
        {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE},
@@ -352,7 +361,8 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
         */
        lp->cur_rx = 0;
        for (i = 0; i < RX_RING_SIZE; i++) {
-               uc->rx_ring[i].base = PCI_TO_MEM_LE(dev, (*lp->rx_buf)[i]);
+               addr = pcnet_virt_to_mem(dev, (*lp->rx_buf)[i], false);
+               uc->rx_ring[i].base = cpu_to_le32(addr);
                uc->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
                uc->rx_ring[i].status = cpu_to_le16(0x8000);
                PCNET_DEBUG1
@@ -383,8 +393,10 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
 
        uc->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
                                               RX_RING_LEN_BITS);
-       uc->init_block.rx_ring = PCI_TO_MEM_LE(dev, uc->rx_ring);
-       uc->init_block.tx_ring = PCI_TO_MEM_LE(dev, uc->tx_ring);
+       addr = pcnet_virt_to_mem(dev, uc->rx_ring, true);
+       uc->init_block.rx_ring = cpu_to_le32(addr);
+       addr = pcnet_virt_to_mem(dev, uc->tx_ring, true);
+       uc->init_block.tx_ring = cpu_to_le32(addr);
 
        PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
                     uc->init_block.tlen_rlen,
@@ -394,7 +406,7 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
         * Tell the controller where the Init Block is located.
         */
        barrier();
-       addr = PCI_TO_MEM(dev, &lp->uc->init_block);
+       addr = pcnet_virt_to_mem(dev, &lp->uc->init_block, true);
        pcnet_write_csr(dev, 1, addr & 0xffff);
        pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
 
@@ -424,6 +436,7 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
 static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
 {
        int i, status;
+       u32 addr;
        struct pcnet_tx_head *entry = &lp->uc->tx_ring[lp->cur_tx];
 
        PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len,
@@ -451,9 +464,10 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
         * Setup Tx ring. Caution: the write order is important here,
         * set the status with the "ownership" bits last.
         */
+       addr = pcnet_virt_to_mem(dev, packet, false);
        writew(-pkt_len, &entry->length);
        writel(0, &entry->misc);
-       writel(PCI_TO_MEM(dev, packet), &entry->base);
+       writel(addr, &entry->base);
        writew(0x8300, &entry->status);
 
        /* Trigger an immediate send poll. */