* AUI/TP selection ( mine has 10Base2/10BaseT select )
*
* Arguments:
- * io = for the base address
+ * io = for the base address
* irq = for the IRQ
*
* author:
- * Erik Stahlman ( erik@vt.edu )
- * Daris A Nevil ( dnevil@snmc.com )
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
*
*
* Hardware multicast code from Peter Cammaert ( pc@denkart.be )
* o lan91c96.c (Intel Diagnostic Manager driver)
*
* History:
- * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
+ * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
* for lan91c96
*---------------------------------------------------------------------------
*/
#include "lan91c96.h"
#include <net.h>
-#ifdef CONFIG_DRIVER_LAN91C96
-
-#if defined(CONFIG_CMD_NET)
-
/*------------------------------------------------------------------------
*
* Configuration options, for the experienced user to change.
/*
* Function: smc_reset( void )
* Purpose:
- * This sets the SMC91111 chip to its normal state, hopefully from whatever
- * mess that any other DOS driver has put it in.
+ * This sets the SMC91111 chip to its normal state, hopefully from whatever
+ * mess that any other DOS driver has put it in.
*
* Maybe I should reset more registers to defaults in here? SOFTRST should
* do that for me.
* This sends the actual packet to the SMC9xxx chip.
*
* Algorithm:
- * First, see if a saved_skb is available.
+ * First, see if a saved_skb is available.
* ( this should NOT be called if there is no 'saved_skb'
* Now, find the packet number that the chip allocated
* Point the data pointers at it in memory
* Dump the packet to chip memory
* Check if a last byte is needed ( odd length packet )
* if so, set the control flag right
- * Tell the card to send it
+ * Tell the card to send it
* Enable the transmit interrupt, so I know if it failed
- * Free the kernel data if I actually sent it.
+ * Free the kernel data if I actually sent it.
*/
static int smc_send_packet (volatile void *packet, int packet_length)
{
}
#endif /* 0 */
-#endif /* COMMANDS & CFG_NET */
-
-
/* smc_get_ethaddr (bd_t * bd)
*
* This checks both the environment and the ROM for an ethernet address. If
return (1);
#endif
}
-
-#endif /* CONFIG_DRIVER_LAN91C96 */